Power Strike Small Engine Regular Starter Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3399640
Dryer won't heat or overheats on low settings? A faulty temperature selector switch prevents proper heat control. Easy DIY fix in 10-15 minutes.
Do-It-Yourself Stories from Customers like You
My kenmore dryer was not gnitind so therefore no heat also my washer was leaking under the machine Bill K. • Midland Park , NJ • November 24, 2014
THE WSHER WAS EASY BECAUSE THE DRAIN PUMP HAD TWO PENNIES INSIDE IT AND THEY CRACKED THE HOUSING.EASY FIX REPLACING THE DRAIN PUMP. WORKS LIKE A CHARM. DRYER WAS A BIT MORE WORK.I CHANGED THE IGNITER FIRST WITH YOUR ADVICE. STILL NOTHING. I THEN CHANGED THE COIL VALVE KIT. NO LUCK. NEXT WAS THE TEMP SWITCH ON THE PANEL. STILL NO GOOD.FINALLY THE THERMAL FUSE WAS RECOMMENDED. I WAS ABLE TO PURCHASE ONE LOCALLY AND IT WORKED . GREAT RELIEF.THANKS FOR ALL THE HELP AND RECOMMENDATIONS. YOUR...
Read more
More
$62.61
- Compare At:
-
$73.88
- You Save:
-
$11.27
Genuine Ge part
By: Ge
Part Number: WR08X10112
Fix compressor clicking every few minutes or fridge not cooling. This start relay and overload combo helps your compressor start and prevents overheating. Easy 5-minute fix.
Do-It-Yourself Stories from Customers like You
Constant clicking sound from behind refrigerator and compressor would not kick on all the time freezer temp was above the desired temperature Peter H. • Bayside , NY • May 10, 2016
I replaced the old capacitor and combo device after watching repair video. Took less than 5 minutes and now my ge profile refrigerator is running perfectly.
Read more
More
$104.57
- Compare At:
-
$123.39
- You Save:
-
$18.82
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304470340
Fix a humming compressor that won't start by replacing this capacitor. Restores proper startup and cooling. DIY-friendly repair under 30 minutes.
Do-It-Yourself Stories from Customers like You
The power was still on but the unit no longer cooled Kimberly B. • Santa Ana , CA • March 09, 2018
We replaced the starter and relay. Unit is working properly. We saved over $150 by replacing the parts in question.
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8566498
Dryer not heating or taking too long to dry? This high-limit thermostat monitors temperature and cuts power when it gets too hot. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Dryer not heating Jeffrey F. • Apex , NC • September 16, 2017
Our dryer seemed to be taking a long time to dry, often needing a couple cycles to complete the job. Then one day it stopped heating at all. After watching a couple videos and testing with a multimeter I figured out not only the thermristor had blown (can happen due to bad airflow) but also half the heating element was shot. I ordered both parts for overnight delivery and received them at noon the next day. Replacement was easy and the dryer is good again.
Side note: After the repair was...
Read more
More
$51.62
- Compare At:
-
$60.91
- You Save:
-
$9.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 216594300
The Starter is an OEM replacement part for Frigidaire refrigerators. This component is crucial for initiating the compressor, which is responsible for cooling the refrigerator. The starter works by providing the necessary electrical power to get the compressor running, ensuring that the refrigerator maintains the correct temperature.
Causes of a bad starter can include electrical malfunctions, wear and tear over time, or damage from power surges. A faulty starter can prevent the compressor from starting, leading to cooling issues.
Symptoms of a bad Starter include:
- The refrigerator not cooling properly
- The compressor not running or frequently cycling on and off
- Unusual clicking or buzzing noises from the compressor area
- The refrigerator being warmer than usual or food spoiling quickly
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Overload protector done its job we had not defrosted the freezer for a long time causing the compressor to run more than it should it got overloaded found it defrosting Wanda L. • Belle Rose , LA • December 09, 2014
First checked the power then took off the compresser connections cover looked for burnt wires or loose or disconnected wires they were none of those I then removed the wires from the starter an overload protector removed them checked both for contunuaty overload protector no contunuaty then I checked the 3 poles on the comp. for contunuaty they were ok then I checked each pole to ground on the com. to final check that the comp. was still good
Read more
More
$43.95
- Compare At:
-
$52.30
- You Save:
-
$8.35
Genuine Whirlpool part
By: Whirlpool
Part Number: 279872
This fixed-value resistor is an electrical component used in select dryers to limit current in a specific control circuit. It helps the timer or electronic control operate correctly by dropping voltage to safe, design-intended levels.
- Provides precise resistance to reduce voltage/current in the designated dryer circuit
- Supports proper operation of the timer, control board, or end-of-cycle signal (varies by model)
- Failure may present as a timer that won't advance, an inoperative signal/buzzer, or irregular cycle behavior
- Replace if visibly burned/damaged or if testing shows an open or shorted condition
What's included: One resistor Install notes:
- Disconnect power to the appliance before servicing
- Access the console/wiring harness and note original wire routing
- Make secure, insulated connections and route the resistor/leads exactly as original to avoid heat or chafing
- After installation, run a test cycle to ensure proper operation of the affected function
Do-It-Yourself Stories from Customers like You
Timer wouldn't advance on my dryer John L. • Oblong , IL • March 22, 2016
I ordered a new timer and installed it with the help of the videos provided and this did not solve my problem so I chated with the pros @ Appliance Parts Pros and told them my problem and they told me the problem and recommended the part I needed and With the incredibly fast shipping I had the part the next day. I installed it and now my dryer timer works great.Thanks to APPs for their help and ease of ordering and fast shipping. I highly recommend AppliancePartPros and will definitely use...
Read more
More
$46.35
- Compare At:
-
$55.16
- You Save:
-
$8.81
Genuine Whirlpool part
By: Whirlpool
Part Number: W11165163
The Electrode is an OEM replacement part for Whirlpool dryers. It is responsible for detecting the moisture levels in your laundry during the drying cycle, allowing the dryer to automatically adjust the drying time and temperature. It helps prevent over-drying or under-drying of your clothes, saving energy and protecting them from potential damage.
A bad electrode can occur due to wear and tear, damage, or a buildup of debris or lint. If you notice symptoms such as clothes taking longer to dry, the dryer shutting off prematurely, or inconsistent drying results, it may be time to replace the moisture sensor bar electrode.
Symptoms of a bad electrode include:
- Clothes taking longer to dry than usual
- The dryer shutting off prematurely
- Inconsistent drying results, with some items remaining damp
Repair your dryer by replacing the faulty or damaged electrode with this genuine OEM part.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10178809
Fix a dryer that won't heat or overheats with this cycling thermostat. Regulates heating element temperature for consistent drying. Simple DIY repair.
Do-It-Yourself Stories from Customers like You
Worn or broken thermostat. Nicholas R. • Canyon Lake , TX • March 14, 2024
It’s a simple fix. Unplug the wires and remove the two screws and replace it with the new one.
Read more
More
$58.43
- Compare At:
-
$70.12
- You Save:
-
$11.69
Genuine Whirlpool part
By: Whirlpool
Part Number: W10295405
Dryer door won't stay closed? This door strike engages with the catch to secure the door. Simple DIY fix in minutes with basic tools and video guide.
Do-It-Yourself Stories from Customers like You
Door strike broken Charlie B. • Crestview , FL • March 18, 2016
Removed and replaced with new strike and catch. Per instruction video.
Read more
More
$65.74
- Compare At:
-
$78.23
- You Save:
-
$12.49
Genuine Whirlpool part
By: Whirlpool
Part Number: W11035628
Washer won't start and door won't lock? This door latch securely holds the door closed during cycles. Moderate DIY repair with multimeter testing.
More
$56.34
- Compare At:
-
$67.61
- You Save:
-
$11.27
Genuine Ge part
By: Ge
Part Number: WE4M411
Dryer won't heat or overheating? The temperature switch controls heat settings. DIY-friendly repair—just swap wires and reassemble. Takes 20 minutes.
Do-It-Yourself Stories from Customers like You
The timer was sticking to the point where the knobs were stripping out Peter A. • Dallas , OR • December 16, 2014
I unscrewed the 3 Phillips screws on the back of the dryer controls housing, then it folds forward for access to each control switch. the old one popped out, and I swapped the wires using a needle nose pliers, one by one, from the old switch to the new switch. The part was an exact fit, and popped right back into the housing. I screwed the 3 screws back in, pushed on the new knob, and it looks and works like new !
Read more
More
$64.70
- Compare At:
-
$77.64
- You Save:
-
$12.94
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8565122
Dryer won't start or door won't stay closed? A worn door strike prevents proper latching. Simple 10-minute fix with just a screwdriver. Video guide included.
Do-It-Yourself Stories from Customers like You
Maytag industrial dryer door would not stay closed the plastic striker broke Viktoriya K. • Salem , MA • September 01, 2014
Took the door down, disassembled the door, replaced the striker, put the door together, attached to the dryer.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9760889
If your oven door won't lock, stays locked after self-clean, or shows door lock errors, this door lock motor and switch assembly often solves the issue.
Do-It-Yourself Stories from Customers like You
Auto clean safety lock stuck in locked position Brian S. • St Pauls , NC • January 12, 2015
My appliance is a Whirlpool Accubake Wall Oven, single door. After using the tech sheet and measuring the ohms of the two micro switches that sends signals when the door is shut and locked, determined the lock was faulty. Pretty simple to change, the most difficult part was taking the digital face off of the oven without damaging the control board. TIP: take a picture of the latch switches to ensure you put the correct wires on the correct switch.
Read more
More
$240.65
- Compare At:
-
$286.37
- You Save:
-
$45.72
Genuine Bosch part
By: Bosch
Part Number: 00155633
Door won't lock or difficult to open during self-clean? This oven door latch assembly secures the door and reports lock status to the control board.
More
$44.95
- Compare At:
-
$53.94
- You Save:
-
$8.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 134786110
This moisture sensor monitors dampness inside the dryer drum and signals the control when fabrics are dry, helping automatic cycles end on time and avoid overdrying. Replacing a failed sensor can restore consistent Auto Dry performance and cycle times. What it does:
- Detects moisture level via conductivity across the sensor surfaces inside the drum
- Sends feedback to the control so Auto Dry cycles advance and stop correctly
- Helps prevent overdrying and underdrying in sensor-based cycles
- Common symptoms of a faulty sensor may include: auto cycles ending too soon or running too long, clothes remaining damp, or the dryer staying on "Sensing" while timed cycles still work
What's included:
Install notes:
- Disconnect power and, if applicable, shut off gas before servicing
- Access the sensor at the front bulkhead/lint housing area; remove front panel as needed per model
- Transfer connectors and route wiring exactly as original; secure the sensor firmly
- Clean the sensor contact surfaces with rubbing alcohol; residue from dryer sheets or fabric softeners can affect readings
Do-It-Yourself Stories from Customers like You
Clothes got stuck on moisture sensor bar and broke it off Felix M. • Kyle , TX • April 17, 2015
Fixed it in 5minutes.
One end has a Phillips head screw and the other has a tab with to metal leads for wires. The end with the tab broke. I removed the screw for the other end abd the sensor bar came off. To put the new piece on, I connected the wires to the leads, slid the tab end into place on the drum and screwed in the other end. Done! Easy!
Read more
More
$81.36
- Compare At:
-
$96.82
- You Save:
-
$15.46
Genuine Ge part
By: Ge
Part Number: WB49T10020
Oven door won't lock for self-clean cycle? This door latch assembly secures the door during cleaning and reports lock status. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Door latch froze halfway between cleaning lock and open would not close or open Craig M. • Carmel , IN • November 14, 2014
Worked with phone person at AppliancePartsPros and determined problem could be either the latch motor or the circuit board.
Ordered parts for both the latch motor and the control circuit board. Since a relay on the board was clicking and the motor would not budge, I installed them both and oven is working again!!
Presumably because of the number of warehouses, I ordered the parts on Sunday and they arrived Tuesday morning.
Great help! Great speed! Perfect matches on the parts!!
Read more
More
$158.95
- Compare At:
-
$193.08
- You Save:
-
$34.13