Can-Air Start Switch Stack Parts
Genuine Ge part
By: Ge
Part Number: WR07X10112
Clicking noise from compressor area? This start relay powers the compressor start winding. Common fix for compressors that won't start or click repeatedly.
Do-It-Yourself Stories from Customers like You
Compressor would not run after being submerged during flood Daniel V. • Dayton , TX • November 10, 2019
Ordered compressor overload and relay. Problem was fixed
Read more
More
Genuine Ge part
By: Ge
Part Number: WR09X10105
Fridge won't cool and makes clicking sounds? The compressor overload may have failed. Protects against overheating. DIY repair takes 15-45 minutes.
Do-It-Yourself Stories from Customers like You
Compressor not starting. Don G. • Kyle , TX • August 11, 2022
Replaced the Start Relay/Overload.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10215034
Fixes dual burner stuck on high, won't heat, or no inner ring control. This infinite switch restores precise temperature selection. 45-60 minute DIY repair.
Do-It-Yourself Stories from Customers like You
Burner didn't turn on Bruce H. • Granger , IN • August 18, 2015
I replaced both the element and the switch. It was a relatively easy fix, although I needed a second set of hands to hold the stovetop upright while I did the replacement. The entire job took about 45-60 minutes.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002121
If your cooktop burner only works on high or won't adjust temperature, the infinite switch likely failed. DIY-friendly repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Right front double burner only worked on high!!!! Rolland F. • Brasher Falls , NY • September 21, 2014
Ordered the part and a few days later it arrived and I turned off the power and took a few screws out and unpluged the old one and pluged in the new .. Works like a charm.. Was very easy to fix....
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134762000
Fix E32 error codes or washer stopping during fill with this water level pressure switch. Senses water level and controls fill cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Washer would stop after about 30 second on fill cycle diagnostic code of e32 Kenneth B. • Friendswood , TX • June 04, 2016
The E32 diagnostic code that the Frigidaire washer was throwing after a quick water fill attempt was not in the supplied Data Sheet that came with the washer and Frigidaire would not provide and updated Data Sheet because, "it's a liabiliity issue" was their statement, but they did tell me that the problem was in the Fill Pressure Sensor/Wire Harness or the Main Control Board (the display board). I ordered the Pressure Sensor and Main Control Board from AppliancePartsPros after checking...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241707709
Refrigerator clicking but not cooling? A failed compressor starter prevents reliable startup. This part restores proper cooling by helping the compressor start.
More
Genuine Samsung part
By: Samsung
Part Number: DA34-10120E
Refrigerator light not turning on when door opens? The door switch detects door position to control interior lighting. Simple DIY replacement.
This part fixes the following symptoms
-
Light not working
-
Not dispensing water
-
Ice maker not making ice
See more...
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2183456
Refrigerator not cooling or compressor won't start? This overload protector prevents motor damage from overheating. DIY-friendly fix in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Refrigerator stopped working Patrick H. • Walland , TN • July 04, 2016
Used a muiltimeter to test all parts and ohm'ed out all parts. found out condenser fan motor seized up [open winding in motor] replaced that, and found that also caused the compressor overload and relay to fail, from over heating and over cycling, replaced both parts, powered up the refrigerator retested all electrical parts checked amp reading on all parts under load conditions,works good know, hope to get another 15 years out of this refrigator, its a maytag. over 20 years old.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 154852501
This is the user control and display board located on the front panel of the dishwasher. It contains the buttons, display, and interface circuitry that allow you to select wash cycles, options, and monitor cycle status. Replace this board if the display is blank or flickering, buttons are unresponsive, or the dishwasher does not respond to cycle selections.
Do-It-Yourself Stories from Customers like You
Dishwasher electronics experiencing intermittent failures then complete failure i had power to the control board but no lights on panel etc Stephen H. • Fort Lauderdale , FL • July 12, 2016
I spoke with one of your sales people... ordered the control board and also the button board... ( for $50.00 , I'll replace it too while I'm in there ) .. The boards were here the next day, I installed them and the machine works better than ever ! Easy fix... outstanding sales lady, immediate delivery.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 216954200
This is a start relay device that attaches to the compressor and provides the initial electrical boost needed to start the compressor motor. It works in conjunction with the run capacitor to get the compressor running and then disengages once the motor reaches operating speed. Replace this device if the refrigerator is not cooling, the compressor clicks on and off repeatedly, or you hear a buzzing sound coming from the back of the unit.
Do-It-Yourself Stories from Customers like You
Trying to start and relay or overload just clicking off and on William K. • Morganton , NC • November 28, 2015
Works perfect now
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293818
If your cooktop burner won't heat, stays on high, or won't turn off, a faulty burner control switch is often the cause. DIY repair in 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Failure of switch/controller on stove top. William S. • League City , TX • March 19, 2024
Ordered the switch from AppliancePartsPros.com and received promptly.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9757262
Oven light not turning on when door opens? This door-activated switch detects door position and controls interior lighting. Easy push-in installation.
More
Genuine Bosch part
By: Bosch
Part Number: 00414750
Fix a range hood fan stuck at full speed or not working with a new speed control switch. DIY repair typically takes 15-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Fan worked but only at full speed. Bernard A. • Carmichael , CA • December 05, 2020
Turned off power. Removed cover over back of fan control switch. Unscrewed nut holding old switch in place. Removed clear plastic wire coverings. Hardest part of job. Photographed wires. Removed wires of old switch and replaced with wires from new switch. Had an extra green wire since old switch did not have a ground. Secured switch in panel with nut that came with it. Replaced cover on back of control switch. Turned on power and it now reduces the speed of the fan.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304468224
Do-It-Yourself Stories from Customers like You
The micro switch on the door clasp failed second time in 10 years John P. • Mcdonough , GA • June 23, 2018
Checked on AppliancePartsPros and found the parts, once I received the parts I pulled the outer cover of the microwave and replaced the three switches. For the price of the three switches it was cheaper to install all new. Total repair time, 15 minutes. Microwaves back up and running.
Very easy fix.
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: 55882
This is a start switch intended for use with dryers. With time or because of damage caused by accident, the start switch may stop working correctly. If the start switch isn't working, then the dryer will not function properly, and a replacement part should be ordered. If the push to start switch doesn't respond, it could be damaged or broken. Replacing the push to start switch on a dryer is a simple process. Start by unplugging the machine. Remove the back panel and pull out the old push to start button. Put the new button in its place and reattach the rear panel. Wear gloves for protection. Restore power only after the complete reassembly is performed. This push-to-start button is a genuine OEM replacement part. It is sold as an individual unit. The part is sourced from the manufacturer and made of durable materials. The push-to-start button can be installed in various dryer models made by SpeedQueen and Alliance brands.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 808136601
This is a door-activated switch that detects whether the oven door is open or closed. It controls functions such as the oven light or signals the control board about door position. Replace this switch if the oven light stays on or off regardless of door position, or if the oven does not operate correctly due to a faulty door signal.
Do-It-Yourself Stories from Customers like You
Oven light would never turn off. Raul R. • Northlake , IL • March 15, 2018
Bought a door light switch from your company and used it to replace the bad one from my stove.
Read more
More