Circuit Board Parts

The Control is an OEM part for Frigidaire ranges. It serves as the central control unit for the oven, allowing you to set and adjust cooking temperatures, timers, and other essential functions.

A bad oven control board can be caused by electrical issues, component failure, or damage due to power surges or other factors. When the control board becomes faulty, it can result in issues such as inaccurate temperature readings, unresponsive controls, or failure of the oven to heat up properly.

Symptoms of a bad control board include:

• Inaccurate temperature readings or inconsistent heating
• Unresponsive or malfunctioning control panel
• Failure of the oven to heat up or maintain desired temperature

Replace your faulty oven control board with this genuine OEM part to restore your range.
This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This electronic control board is the appliance's main control. It coordinates cycle timing and powers key components, helping restore normal operation when the original board fails or causes unresponsive controls, stalled cycles, or error codes.

• Manages inputs from sensors and the user interface to execute programmed cycles
• Distributes power to motors, valves, heaters, fans, and other loads as required
• Stores and runs cycle logic and built-in safety interlocks
• Common symptoms of a failing board: unit won't start, unresponsive controls, cycle won't advance, error codes or blinking lights, intermittent operation

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD protection and handle the board by the edges to avoid static damage
• Photograph/label wiring and transfer connectors one at a time to matching terminals
• Follow the tech sheet/service manual after installation; ensure covers/gaskets are reinstalled to protect the board

This relay board works with the main control to switch power to high-load oven components. Replacing a failing board can restore consistent heating and reliable performance across bake, broil, and convection functions. What it does:

• Switches high-voltage power to oven elements and fans as directed by the control
• Loss of heat in one or more modes (bake/broil/convection) is a common failure symptom
• Intermittent or erratic heating, long preheat, or heat stopping mid-cycle
• Visible burn marks or heat damage on the board

• Disconnect power at the breaker or fuse box before servicing
• Access location varies by model (rear panel or control compartment)
• Photograph wiring and move connectors one at a time to the new board
• Handle by the edges and use anti-static precautions; reuse existing hardware

This part is a washing machine timer. This is the component that controls the washing machine functions and the length of time for each of the cycles. Signs that the timer has gone bad can vary. For example, the washing machine may only wash but will not spin or drain. It might skip cycles or stall mid-cycle. The washing machine could become stuck on a cycle also. If this is happening, the repair person can check for continuity through the timer motor by using a multimeter. If it measures infinite resistance, the timer will need to be replaced. Unplug the washing machine from the wall before trying to replace this part. The person performing the replacement procedure should wear work gloves for safety during the process.This timer is compatible with washing machines that are manufactured by Kenmore and Whirlpool. It is sold individually. This part comes directly from the manufacturer.

This user interface is the electronics behind a full-door console dishwasher panel. It reads your button selections and communicates with the main control so cycles start and options respond reliably.

• Interprets keypad inputs from the console and sends commands to the control board
• Helps restore proper control of wash cycles, options, and start/delay functions
• Common symptoms: unresponsive or intermittent buttons, no console lights, can't start from the panel, erratic beeping/stuck-key behavior
• Built for full-door (full-console) configurations used on select models

• Disconnect power at the breaker; turn off the water supply
• Remove inner door/console screws to access the UI; support the panel to avoid straining wires
• Handle the board with ESD care; transfer any mounting clips/brackets and seat ribbon cables/connectors fully and correctly
• Reassemble the door and test console operation before running a full cycle

This is the display/control circuit board for the refrigerator's user interface. It drives the temperature/readout display and processes button inputs so you can adjust settings and dispenser functions from the front panel.

• Manages the front-panel display and keypad signals
• Helps when the display is blank or dim
• Helps when buttons don't respond or settings won't change
• Helps with erratic or incorrect temperature readouts

• Disconnect power to the refrigerator before servicing
• Use proper ESD precautions when handling the board
• Take photos of wire/ribbon connections to ensure correct reassembly
• After installation, restore power and verify display and button operation

The Cntrl-Elec is an OEM component specifically designed for Whirlpool brand gas ranges. This control board module regulates electrical functions and sends signals to components of the electric oven and cooktop controls. 

Causes of a bad control board can include moisture damage, physical impact over time, or normal component degradation from regular use of the appliance.

Symptoms of a bad control board include:

• Inability to turn on electric oven bake/broil functions  
• Unresponsive touch controls or improper display readings
• Odd noises, smells or sparks coming from control area
• Failure to ignite gas burners or regulate flame levels

This Whirlpool replacement part is also compatible with KitchenAid, Jenn-Air and select Kenmore models.

This timer is the mechanical cycle controller for select top-load washers. It sequences power to the motor, water inlet valves, and drain pump so each step runs in the correct order and duration for consistent, reliable operation.

• Directs power to advance the washer through fill, wash/agitate, drain, and spin
• Restores proper cycle advancement when the washer stalls or skips steps
• Helps resolve symptoms like stopping mid-cycle or running indefinitely
• Can correct intermittent or erratic cycle timing/advancement issues

• Disconnect power before servicing; access the timer from the control console
• Transfer wires from the old timer to the new one, moving one connection at a time
• Reuse existing mounting hardware and control knob/dial as applicable
• Handle sharp cabinet edges and verify dial alignment before reassembly

This timer controls the length and sequence of your appliance's operating cycles. Replacing a worn or stuck timer restores proper advancement so the machine starts, runs through each stage, and shuts off when it should.

• Advances the cycle automatically through each stage
• Sends power to components at the correct time
• Helps ensure the unit starts and stops on schedule
• Helps when the cycle won't advance, stops mid-cycle, runs too long/never shuts off, or only works on one setting

• Disconnect power before servicing
• Access the timer behind the control panel/console
• Transfer wires one at a time from the old timer to the new, matching positions
• Secure the timer with mounting screws; align the shaft with the dial/knob as applicable and test operation

This is an electronic clock control board that is made for use with ovens and microwave/oven combination appliances. It is located at the back middle of the range and includes a small display window. The control panel is used to manage the oven functions like baking and broiling. It also includes a clock to show the time of day.If the oven cannot be changed from bake to broil, it may indicate the part is no longer working. A test of the heating elements can determine whether this is the case. Before starting the replacement process, make sure the range is not plugged into the wall and the oven and cooktop are both cool. Open the oven door to access the screws that hold the control board. Unclip the ribbon connection before removing the part. Reverse the process to install the new part.The electronic clock control board is sold as a single part. It is an authentic OEM replacement part that is compatible with wall ovens and microwave/oven combos from Jenn Air.

This genuine replacement part is a control board. The control board is responsible for sending signals to determine the oven's various functions. Attached to the buttons, the control board's circuits allow for the temperature and timer to be adjusted on the oven.To replace the control board, first, make sure that the circuit breaker is off and the oven is unplugged. Pull out the oven to gain access to the back of the range. Locate the upper back panel and remove screws to expose the back of the control board. Pop out the old control board and take note of any wires that are connected. Unplug the wires from the old control board, and resecure them into the new part. Place it back to its original space, and resecure the back panel of the range.This is a genuine replacement part for an control board compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper ovens.

The Main Control Board  is an OEM part for GE refrigerators. This main control board serves as the central control hub for your refrigerator, responsible for regulating various functions such as temperature control, defrost cycles, and overall operation.

A bad main control board can occur due to electrical issues, component failure, or other factors. If you notice symptoms such as erratic temperature readings, unresponsive controls, or complete refrigerator malfunction, it may be time to replace the main control board.

Symptoms of a bad main control board include:

• Erratic temperature readings
• Unresponsive controls
• Complete refrigerator malfunction

Restore proper function to your GE refrigerator by replacing the faulty main control board with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This is the refrigerator's electronic main control board. The power PCB coordinates the compressor, fans, and defrost system using sensor inputs—helping restore stable temperatures, proper defrosting, and consistent operation when the original board fails. What it does

• Routes and regulates power to the compressor and evaporator/condenser fans; failure can cause no-cool or intermittent cooling
• Interprets thermistor signals to manage run times and temperature targets; faults may lead to erratic temperatures
• Controls the automatic defrost cycle to prevent frost buildup and restricted airflow
• Interfaces with other control components; issues can present as clicking from the board, display anomalies, or unresponsive controls

• One main power control board

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD protection; handle the board by the edges and avoid touching components
• Access the control behind the external service cover; transfer connectors one at a time and reuse original mounting hardware/enclosure
• Restore power and allow the refrigerator to stabilize at set temperatures after installation

The Refrigerator LCD PCB Assembly Kit is an essential component for maintaining your Samsung refrigerator's performance. This genuine OEM part ensures reliable control and display functions, allowing you to monitor and adjust your appliance settings with ease. Designed for compatibility with a variety of Samsung refrigerator models, the kit provides a seamless fit and straightforward installation. By replacing a faulty PCB assembly with this high-quality kit, you can restore your fridge's electronic controls, enhancing its efficiency and longevity. The Refrigerator LCD PCB Assembly Kit supports accurate temperature management and user-friendly interface operations, contributing to optimal food preservation. Investing in this genuine OEM part guarantees that your refrigerator operates smoothly, providing peace of mind and improving the overall user experience.

Restore reliable oven operation with this electronic oven control board. It governs the bake/broil relays, regulates temperature with the sensor, and runs the display and keypad so settings respond and heat is accurate.

• Interprets keypad inputs and switches oven heating circuits through onboard relays
• Works with the temperature sensor to maintain the set temperature during bake and broil
• Powers the clock/temperature display and stores oven settings
• Common signs of a failed board: blank or flickering display, unresponsive keys, no bake/broil heat, erratic temperatures, or recurring control error codes

• Disconnect power at the breaker before servicing
• Handle the board by the edges and protect against static discharge
• Photograph wiring and transfer any brackets, spacers, or the overlay from the old board
• Seat ribbon cables/connectors fully and verify operation after reassembly

This washer timer controls the sequence and length of each cycle so the machine advances through wash, rinse, drain, and spin as selected. Replacing a worn timer restores reliable cycle progression and helps prevent stalls or incomplete loads.

• Directs power to the motor, pump, and inlet valves according to the selected program
• Advances the washer through fill, agitate, drain, and spin stages
• Common failure symptoms: cycle won't advance, stops mid-cycle, only runs on certain settings, or requires manually turning the knob to proceed
• Also presents as intermittent operation or erratic timing

• Disconnect power before servicing
• Access the control console; take clear photos and label wires, then transfer them to the new timer one at a time
• Seat the timer shaft through the panel and secure the mounting screws
• Reuse your existing control knob and dial; test a full cycle for proper advancement