Need Help?
Call
Bake element restores oven heat by producing the radiant heat needed for baking and roasting. Replacing a worn or damaged bake element helps the oven reach and maintain set temperatures for more consistent cooking results. What it does:
This is an electric broil element that mounts at the top of the oven cavity in a range. It provides high, direct heat from above for broiling foods. Replace this element if the broiler does not heat, heats unevenly, has visible damage such as blistering or burn-through spots, or if it sparks during operation.
This kit includes a replacement heating element and a high limit thermostat for an electric dryer. The heating element generates the hot air that dries your clothes, while the high limit thermostat acts as a safety device to prevent overheating. Replace this kit if your dryer is not producing heat, takes too long to dry clothes, or shuts off prematurely due to overheating.
PLEASE UNPLUG DRYER FIRST. This was my first attempt at trying to fix my dryer (Maytag SDE515DAYW). Order the element kit Part Number AP4046564. The installation was easier than I thought. Just removed the two front panels and I was able to reach the back of the dryer, under the drum (this is where the heat element was located), disconnected the wires (took pictures first) and removed the two screws that held the heat element. Pulled the part down and it just slid off. Connected all the wires... Read more
Burner won't heat or heats unevenly? This radiant surface element mounts under your glass cooktop to restore consistent heating. DIY-friendly repair.
I took some part numbers from the underneath side of the burner along with the stove model number and entered them on the internet and luckily found the part that I was looking for - I purchased it and it was delivered very quickly (faster than I expected). I took pictures of the burner before taking it apart and then removed the broken burner and replaced it with the new burner, put all the other parts back together and it worked perfectly the first time I turned it on. I feel like a real pro... Read more
Fix ice buildup on evaporator coils with this defrost heater. Solves blocked vents and poor cooling. Mounts at evaporator, moderate DIY repair.
White Westinghouse refrigerator door was accidentally left open over night when it was humid, and moisture condensed on the interior. In the morning the arc fault circuit breaker was tripped. Tried letting the unit dry out, but it would still trip the breaker as an arc fault. Started unplugging various components, compressor, evaporator fan, finally the defrost heater before it could be plugged in without tripping the breaker. Although the defrost heater's resistance measured normally, when it... Read more
Washer water heater element raises water temperature during wash cycles. Replace if cracked, corroded, or no longer heating properly in your machine.
This convection ring element supplies the heat for the oven's convection bake and roast cycles. Replacing a failed element restores even convection performance so foods cook properly across multiple racks.
Replaced with new part, so lucky to have found it for my discontinued oven. I love this oven in the convection mode. Thought I was doomed to replace it. Couldnt even find a local electrician to service it, yet alone find parts. Thank you for having the original replacement part! I'm happily baking again.... Read more
Burner not heating? This surface radiant element sits beneath the glass cooktop and restores heat to a cold zone. Moderately difficult repair.
I ordered a new burner and switch. Received all parts in only one day. Shut breaker, pulled out the range to work on it. Removed the front panel to replace the switch first which was the easy part of the job, only 6 screws. Installed new switch, turned on the breaker to test and found that the burner heated up proving that only the switch was bad. Shut breaker again, reinstalled front panel, reinstalled the range and turned the breaker back on. Just in time for Easter dinner! Returning... Read more
Fix a broiler that won't heat or a melted element. This range broil element delivers direct radiant heat at the top of your oven during the broil cycle.
Replaced the element. Read more
Range burner not heating? This 8-inch surface element restores even heating to your cooktop. Simple plug-in replacement takes under 10 minutes with no tools.
I unplugged the old, plugged in the new, and started cooking. Read more
All metal liner SxS production built January 2003 through January 2007 (serial numbers AF through AM): Models BSS, DSS, ESH, GSH, GSS, GST, HSS, SSS
I read about the water dispenser issue with GE refrigerators. There are many areas in this appliance that can have issues in preventing water from passing through the dispenser housing, or not producing ice cubes. Based on the troubleshooting advice of an experienced appliance repair person at Appliance-repair-it.com, I ordered the GE water dispensing heater, part # WR49X10173, from AppliancePartsPros.com. Later, per the instructions from the heating unit I received, I also bought a tube of... Read more
Fixes ice buildup in freezer and warm fridge temps. This defrost heater melts frost from the evaporator to restore proper airflow and cooling performance.
R&R "defrost heater". Read more
This defrost heater assembly mounts near the evaporator coils inside the freezer compartment and generates heat to melt frost buildup during the automatic defrost cycle. It keeps the evaporator coils clear so the refrigerator can cool efficiently. Replace this heater if you notice excessive frost buildup in the freezer, the refrigerator is not cooling properly, or the defrost cycle is not functioning.
I installed a new heater. Read more
Burner won't heat or only works on one setting? This surface heating element restores even heat to your cooktop. Simple plug-in replacement.
I ordered the part from you Read more
Broiler won't heat up? This upper heating element restores high-heat broiling and surface browning. Takes about 15 minutes to replace with basic tools.
Ordered both elements and watched the video on the website. Followed the video and it took about 15 minutes. I found using a binder clip to keep the wires from falling back into the over works well Read more
Burner won't heat or stays on high? This dual radiant surface element restores proper heating. DIY-friendly repair—lift cooktop, disconnect wires.
Found videos on youtube that showed how to do the job. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.