Need Help?
Call or text
This replacement switch restores reliable on/off control for the matched function in your appliance. A worn or sticking switch can prevent components from powering correctly; replacing it helps bring back consistent, safe operation.
Fix a washer button that won't respond, works intermittently, or sticks when pressed. This pushbutton switch restores on/off control for your appliance.
Clicking noise from compressor area? This start relay powers the compressor start winding. Common fix for compressors that won't start or click repeatedly.
Ordered compressor overload and relay. Problem was fixed Read more
Fix a refrigerator that won't cool and clicks every few minutes. This start relay and overload assembly mounts on the compressor to restore reliable starting.
Pulled the relay off of the condenser motor (3 pin connection) and removed 2 wire feeds. Reversed the procedure for the install. Ordered the new relay and decided to replace the run capacitor as well just to be safe. Appliance Parts Pros was a really good website to help identify the 2 part numbers and see pictures that confirmed they were the same as the original. Price was competitive with others. Read more
If your oven won't start or runs with the door open, this door interlock switch detects proper closure and latching. DIY repair in under an hour.
This turned out to be a very complicated repair ONLY because the wires that attached to the very far end of the broil element came detached inside and behind the wall of the oven. It is one step this side of impossible to fish the wires out and reconnect them to the new element. This would be a very easy job PROVIDED that you do not allow the two wires that connect to the element to become detached inside the rear oven wall. Read more
If your range hood buttons don't respond or functions won't activate, this rocker switch restores reliable on/off control in your control panel assembly.
Fix a dual burner that won't heat or lacks proper temperature control. This infinite switch restores heat regulation for accurate simmer-to-boil cooking.
Ordered a new switch (4456027) from you. You seemed to have the best price and guaranteed that it was a OEM part -not everybody did. I had repaired Jenn Air cook tops before so I thought this was not a problem. Wrong. Mostly it was my own stupidity. I exchanged the wires from the old switch to the new one at a time but did write down where the original wires went. Flipped the breakers back on. Only one heater got hot. Searched the internet for several days for a wiring diagram. Nothing much.... Read more
Oven light not turning on when door opens? This door-activated switch detects door position and controls interior lighting. Easy push-in installation.
If your washer overfills, underfills, or won't advance cycles, the water level pressure switch likely failed. This DIY repair restores proper filling.
Removed upper cowling swapped out switch. Read more
Fix burner clicking without sparking or nonstop clicking with this valve switch. Restores spark ignition when you turn the knob to Lite. Easy DIY repair.
Ordered new igniter, a little different from the original but fortunately was able to get it to operate ok with a little bit of modification ?? Read more
Interior light stays on or won't turn on when door opens? This door-activated switch restores automatic on/off lighting. Easy 15-minute fix.
Refrigerator clicking but not cooling? A failed compressor start device causes repeated clicking and warm temps. Quick DIY fix restores reliable starts.
Replacing the start device corrected the concern. Read more
Burner won't spark or ignite? This ignition switch controls the spark module for gas range surface burners. Mounts on the valve assembly behind knobs.
Rather than replacing the whole ignition switch harness, I cut out the broken switch and replaced it with Burner Ignition Switch WB24K10017 / AP2632529. Wire stripper, small wire nuts, and electrical tape were also used. At first, the new switch was constantly on when the knob was in the off position. The gas valve shaft has a "U" shape. When the U is right side up, the gas is off and so should the igniter. The gas valve shaft position couldn't be changed, so instead, I re-mounted the... Read more
Color: Black. Instruction sheet included.
Removed rocker switch,made up jumper so the compactor could be used while awaiting replacement switch. The part came 2 days later and was installed in less tha 5 minutes. Unit working like new again. Thanks for the great service!! Read more
Fix burners that won't light with this cooktop igniter switch wire assembly. Restores reliable spark ignition when switches fail. Moderate DIY repair.
Replaced igniter switch harness Read more
Fix washer temperature issues with a new selector switch. Solves problems when hot or cold water won't flow correctly or temperature settings don't respond.
Ordered the Switch-Temp ordered from AppliancePartsPros and installed it myself. Read more