Cogged Sump Filter Parts

I called AppliancePartsPros and ordered a new filter. Read more

Removed the 4 Torx (T-20) screws to remove the bottom tray, loosened the 2 steel adjustable hose clamps and disconnected the hoses from the old pump. Removed the 2 Torx screws from the drain pump mounting bracket and the 2 that mount the pump to the bracket. Discarded the old pump, reversed the above process for installating the new pump and the dishwasher is functioning normally again. All in well under 30 mins. Read more

After having intermittent issues with Error Code 01 on our Electrolux dishwasher for several years - the dishwasher started having the code on a more frequent basis. In addition, it did not seem to be draining correctly, and the pump was not as quiet as when new. Prior to this repair, I pulled out the dishwasher, cleaned the hoses and internal parts, ensured hoses were clamped correctly, etc. Researching past repairs posted online, I noted issues with many components - to the point... Read more

After going around town to find the lint filter for an older dryer (20 years old), I went on line and found the correct part. Ordered the filter and it around 5 days later. Put it in the dryer works well. Read more

The wash arms and filters were plugged with calcium and no longer spraying. Needless to say this impacts cleaning. The replacement parts were top quality and fit perfect. This simple replacement of parts put new life in trusty Bosch. Read more

Ordered it, received it, placed it in proper place, use the hood! thanks Read more

Tried buying a new filter, still no flow, bought the bypass cap, still no flow. I then purchased the filter housing assembly and within five mins or receiving the part had full flow restored. I saw a lot of comments bashing filter suppliers when researching this issue, but like in my case I bet it was the filter housing unit. Thanks for quick delivery, and easy website. Read more

Put the new one in Read more

Replaced and bought a new one Read more

Replaced with a new motor. Read more

At first, I felt there was a problem with the drain hose. Possibly water would not completely drain out due to a poor routing of the drain hose. It seemed fine - I ensured that I had a 32-ince rise and then a good down hill route to the drain. My drain hose does not drain into the garbage disposal. Then I ran a series of manual relay checks for each component. I had replaced the level sensor sometime in the past; so, I figured that was functioning properly. Why would the rinse cycle seem... Read more