Spitfire Control Parts

Not having any local Thermador support I took the advise from KC on the repair forum. The repair consisted of removing and replacing the control and relay board. The hardest part of the job was working behind the stove while it was pulled from the wall. ( didn't want to scratch my floor ). Over all the repair was simple just pulling wires from old board and installing on new board. The directions sent with the parts are excellent and easy for anyone to follow. I am glad I found this site... I... Read more

Looked it up on you tube found two possible problems, eliminated oven sensor, left only mother board, replaced, very simple procedure, all working well now. Read more

Very easily!! Although the stove in the video was a different setup then ours , it worked. We took the face of the stove off, took out the 9 screws holding it on. Checked the wire attachments against the new unit and plugged in in. The only thing I wished I'd known, the actual face( with the words oven etc.on it) needed to be peeled from the original unit. It came off pretty good and is usable but would have been nice to have a new one. Read more

We had to order the entire timer assembly because the part taking the most abuse is plastic. Of course. Watched the video and easily did the repair. Thanks. Read more

Compressor not running. Check power going to it and nothing. Tested ohms on the compressor. 8-10 ohms approx Lights and display all working normal so I assumed the main board was ok Replaced the inverter board. Confirmed there was 4-5bdc on the red and white trigger plug on the inverter. It’s a waveform that is there also but having voltage on the red and white wire of the inverter is a good sign the mother board is ok. I wanted to confirm the damper door was working properly. The damper is... Read more

Replaced control board with OEM part from ApplianceParts Pro - fit exactly and remedied the problems. Simple to replace - turn off power (circuit breaker), remove internal door panel, remove control board cover and unplug wires/LED leads (the LED lead connectors on the board have a square tension slip ring around them that hold the leads - just pull these up away from board and they will release the leads) and then remove the controller board housing. The controller board is held into the... Read more

Replaced control board Read more

PROBLEM - MY LG RANGE (LRE3091ST) STARTED TO HEAT BUT WOULD NOT GET TO THE FULL TEMP, IT SHUT OFF & GAVE US AN F-11 CODE. I REMOVED THE BAKE HEATING ELEMENT & OVEN SENSOR TO SEE IF THEY WERE WORKING PROPERLY. (YOUTUBE CAN SHOW YOU HOW TO DO THIS) THEY WERE WORKING FINE. SO I ORDERED THE CONTROL BOARD. MY HUSBAND REPLACED IT VERY QUICKLY& THE OVEN IS HEATING UP BETTER THAN BEFORE! GREAT PRICE - VERY FAST SHIPPING! Read more

I looked up the part numbers, ordered them from Appliance Parts Pro and they arrived the next day. Followed the video to replace the parts - it was super easy and now everything works great again! Saved lots of time and money. Read more

The most challenging part of this was determining what the problem was. At first I thought the clutch (or related parts) had worn out, but by chance, I pulled on the timer knob, and the machine started spinning. When I let it go, it stopped. So clearly the spinning part worked. Then I watched a few videos about repairing a bad timer and determined that it was the likely culprit. I ordered the part. It was very simple to replace. And it worked perfectly. Saved me hundreds either in... Read more

With the help of the videos.... really made it easy and much better than the book----(which Shawn also got for me, and I can refer to if I cant access "Matt" on the video)....took all of 15 minutes once I had everything ready as the video said...and it worked just like he said Yea!!!! He made it so simple, my cat could've done it if she had hands... Read more

Repairs installed. Full test today. Install was easy. Read more

Put in a new interface. Read more

• Touchpad does not respond

My son-in-law checked it out, posing questions to an electrical support group, and determined I needed another control unit. NOTE: This had happened 3 years earlier, while the unit was still under warranty thankfully, but the certified repairman told me it would have cost me "out of pocket" over $400.00 to replace. My son-in-law ordered a replacement board, which arrived within 3 days. He then installed it and my machine now works like new! Read more

Texted the helpline and recieved perfect diagnosis Read more