User Interface Board Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001360
Fix a refrigerator with no lights, no cooling, or blank display. This power supply board converts AC to DC for electronic controls. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Refrigerator stopped working no cooling no lights George T. • San Jose , CA • March 04, 2015
Measured power to power supply board (120V AC in, 12.5V and 26V DC out) 120V at input. 0V at output. Replaced power supply board. Refrigerator now works!
Read more
More
$250.95
- Compare At:
-
$298.63
- You Save:
-
$47.68
Genuine Ge part
By: Ge
Part Number: WR55X20817
Refrigerator not cooling or running? This inverter control board supplies power to the compressor. Moderate DIY repair requiring basic electrical testing.
Do-It-Yourself Stories from Customers like You
No code Eric K. • Fountain Valley , CA • December 08, 2023
Compressor not running. Check power going to it and nothing. Tested ohms on the compressor. 8-10 ohms approx
Lights and display all working normal so I assumed the main board was ok
Replaced the inverter board. Confirmed there was 4-5bdc on the red and white trigger plug on the inverter. It’s a waveform that is there also but having voltage on the red and white wire of the inverter is a good sign the mother board is ok.
I wanted to confirm the damper door was working properly. The damper is...
Read more
More
$802.95
- Compare At:
-
$963.54
- You Save:
-
$160.59
Genuine Ge part
By: Ge
Part Number: WR55X43285
Fix a non-responsive display, blinking lights, or cooling failure. This power supply board restores proper voltage to electronic controls and displays.
Do-It-Yourself Stories from Customers like You
Blinking display no cooling Scott A. • Malabar , FL • October 24, 2025
It needed a new control board . I replaced the same board 6 years ago
Read more
More
$129.65
- Compare At:
-
$152.99
- You Save:
-
$23.34
Genuine Lg part
By: Lg
Part Number: EBR60969202
Restore reliable operation with this power control board assembly. It regulates and distributes incoming power to the appliance's circuits and components so the unit powers up consistently and runs as designed when the original board has failed.
- Regulates and stabilizes power delivered to control and load circuits
- Switches power to motors, heaters, fans, and other components via onboard relays
- Provides low-voltage supply for control electronics
- Typical failure symptoms: no power, unresponsive controls, intermittent shutdowns, repeated blown fuse, or visible board damage
What's included: One power control board assembly. Install notes:
- Disconnect power before servicing; capacitors can retain a charge—allow time to discharge and use proper precautions
- Handle the board by the edges and use ESD protection to avoid static damage
- Photograph wiring and move connectors one at a time to the new board to maintain orientation
- Inspect wiring, fuses, and downstream components for shorts before restoring power to protect the new board
Do-It-Yourself Stories from Customers like You
Lre3091st oven not heating f 11 code Paula N. • Shelby Township , MI • December 04, 2016
PROBLEM - MY LG RANGE (LRE3091ST) STARTED TO HEAT BUT WOULD NOT GET TO THE FULL TEMP, IT SHUT OFF & GAVE US AN F-11 CODE. I REMOVED THE BAKE HEATING ELEMENT & OVEN SENSOR TO SEE IF THEY WERE WORKING PROPERLY. (YOUTUBE CAN SHOW YOU HOW TO DO THIS) THEY WERE WORKING FINE. SO I ORDERED THE CONTROL BOARD. MY HUSBAND REPLACED IT VERY QUICKLY& THE OVEN IS HEATING UP BETTER THAN BEFORE! GREAT PRICE - VERY FAST SHIPPING!
Read more
More
$162.48
- Compare At:
-
$193.35
- You Save:
-
$30.87
Genuine Whirlpool part
By: Whirlpool
Part Number: W10595569
Dishwasher stops mid-cycle or won't start? The control board regulates wash and dry cycles. A failed board causes no power or incomplete cycles.
Do-It-Yourself Stories from Customers like You
It was dead like no power Brian D. • Mount Olive , AL • June 01, 2015
I did a little research on the internet. I check to make sure it was getting power with Ohm meter. I took the front panel off to see what I could find. I found 2 dead roaches in the control board box and there was some brown stuff on the control board. I checked the price to replace the part online and local. AppliancePartsPros had the best price and return policy. I figured I had nothing to lose be trying the part out to see if it would work. I installed the new board and it was alive again....
Read more
More
$191.95
- Compare At:
-
$226.50
- You Save:
-
$34.55
Genuine Ge part
By: Ge
Part Number: WB27T10893
Secondary relay board that switches power to cooktop burners and heating elements. Replace if cracked, damaged, or causing intermittent control issues.
Do-It-Yourself Stories from Customers like You
The cooktop controller would not properly maintain burner temperature. Unit kept clicking like a morse code signal Joseph B. • Pen Argyl , PA • April 16, 2019
I repaired the problem by replacing the Power Board assembly and the daughter relay board. Not sure which one was the problem. Since I had it apart I replaced both. So far the unit is working like new. Everything was plug in, so I didn't have to worry about complex wiring. I took pictures prior to disassembly to make sure I got the reassembly right. Worth the effort to fix it- very satisfying.
Read more
More
$72.95
- Compare At:
-
$86.81
- You Save:
-
$13.86
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946475
Washer stops mid-cycle or won't advance through cycles? This timer controls cycle progression. Moderate DIY repair taking 15-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Not agitating noisy running Danny T. • Kahului , HI • January 07, 2016
With the help of the videos.... really made it easy and much better than the book----(which Shawn also got for me, and I can refer to if I cant access "Matt" on the video)....took all of 15 minutes once I had everything ready as the video said...and it worked just like he said Yea!!!!
He made it so simple, my cat could've done it if she had hands...
Read more
More
$208.54
- Compare At:
-
$248.16
- You Save:
-
$39.62
Genuine Whirlpool part
By: Whirlpool
Part Number: WP71003424
Fix a blank or dim display on your oven with this electronic control board. Manages baking, broiling, and clock functions. DIY repair in 15-30 minutes.
Do-It-Yourself Stories from Customers like You
No clock or temperature display on my jennair wall oven Barbara B. • Leawood , KS • December 07, 2014
This couldn't have been simpler! Removed the glass panel by taking out 4 screws on the bottom that were accessed by opening the oven door. Lifted up, then pulled the panel forward, released one electrical connection, and the panel was disconnected and could be laid on a flat surface. Unscrewed the four nut screws on the old control board with a socket set (you could use a small wrench, but it would be tedious), un-clipped the wide ribbon connection ( had to pry it off very gently to avoid...
Read more
More
$261.55
- Compare At:
-
$277.03
- You Save:
-
$15.48
Genuine Ge part
By: Ge
Part Number: WR55X23236
This OEM part is a refrigerator dispenser interface. The dispenser interface is responsible for the main functions of the refrigerator, such as adjusting the temperature settings as well as the other functions that are displayed on the interface. If the refrigerator is no longer cooling efficiently, failing to maintain temperature, dispensing water, or the touchpad is unresponsive, the interface might need to be replaced. Thankfully, replacing this part is not a difficult process.To replace the old interface, make sure that all power to the refrigerator is turned off. Open the refrigerator door and remove the door panel of the interior of the refrigerator. Locate the old control board and remove the wire harnesses that connect to it. Take note of the wire connector's orientation and reinsert the wires to the new board. Snap the new interface back in place and reinstall the inner panel. This genuine replacement part is sold individually and is compatible with General Electric, Hotpoint, and RCA brand refrigerators.
Do-It-Yourself Stories from Customers like You
Ice machine interface failed Aaron S. • Boise , ID • March 21, 2026
Put in a new interface.
Read more
More
$261.34
- Compare At:
-
$310.99
- You Save:
-
$49.65
Genuine Frigidaire part
By: Frigidaire
Part Number: 137070870
Dryer won't start, won't advance cycles, or displays PAU error? This electronic control board manages timing and functions. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Dryer wouldn't shut itself off Joshua S. • Hanceville , AL • March 05, 2016
I replaced the control panel with a new one.
Read more
More
$173.95
- Compare At:
-
$212.88
- You Save:
-
$38.93
Genuine Frigidaire part
By: Frigidaire
Part Number: 316650003
Fix unresponsive buttons, error codes, or power surge damage with this range oven control board. Restores all cooking functions and timer operations.
Do-It-Yourself Stories from Customers like You
Electricity went out for a while! when it came back on there was a few power surges and it fried my control panel on my Kenmore gas range Jamey W. • Rosston , AR • July 19, 2019
Called appliance parts pros because I couldn't find it on their website talked to an associate it didn't take 5 minutes and the part was ordered! It was delivered very quickly and was the exact same as the old one! It was a very pleasant experience!
Read more
More
$334.79
- Compare At:
-
$401.75
- You Save:
-
$66.96
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303918538
This electronic control board manages your refrigerator's key functions including temperature control, defrost cycles, and display operations. It processes input from sensors and user settings to maintain proper cooling performance. Replace this part if temperature control is erratic, the display is blank, or cooling functions stop working.
Do-It-Yourself Stories from Customers like You
Refrigerator would not defrost Rod K. • La Crescenta , CA • September 11, 2017
I measured the continuity of the defrost heater element and the thermostat and they were both good. This only left the main control board. I ordered all three because it was only a matter of time before either the heating element or thermostat went bad. I only changed out the control board and now have the other parts on hand for an immediate fix in the future. Appliance pros were awesome. I paid just a little more for the faster shipping and got the parts the next day even though I expected 2...
Read more
More
$590.54
- Compare At:
-
$708.65
- You Save:
-
$118.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003361
Fix a washer that won't advance through cycles, fills but won't spin, or stops mid-cycle. This timer controls wash, rinse, and spin sequences. 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Washing machine would not complete all of it's cycles David G. • Ballwin , MO • February 24, 2017
Replaced the main timer / control.
Read more
More
$222.52
- Compare At:
-
$264.80
- You Save:
-
$42.28
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946448
Washer won't advance cycles or stops mid-cycle? Timer controls cycle progression. DIY repair if timer knob doesn't advance washing stages properly.
Do-It-Yourself Stories from Customers like You
1994 whirlpool washer model lst8244bq0 not going to spin cycle E R. • Potomac , MD • June 05, 2016
The most challenging part of this was determining what the problem was. At first I thought the clutch (or related parts) had worn out, but by chance, I pulled on the timer knob, and the machine started spinning. When I let it go, it stopped. So clearly the spinning part worked. Then I watched a few videos about repairing a bad timer and determined that it was the likely culprit. I ordered the part. It was very simple to replace. And it worked perfectly. Saved me hundreds either in...
Read more
More
$210.44
- Compare At:
-
$248.32
- You Save:
-
$37.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8531262
Fix dishwasher lights that won't blink or buttons that don't respond. This user interface board reads your selections and starts cycles reliably.
Do-It-Yourself Stories from Customers like You
I could not get dishwasher start button to work start button would not flash lights for cycle and options buttons to start wash cycle Vernon T. • Lithonia , GA • October 25, 2014
I had ordered several parts from Appliance Pros and installed parts that did not solve the problem. Return the parts and was going to give up. Called Appliance Pros Tech and she suggested that I try installing a User Interface Board. She sent me the new board and problem solved. Dishwasher working like new.
Read more
More
$211.55
- Compare At:
-
$215.26
- You Save:
-
$3.71
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8558208
Replaces the front control panel console on your dishwasher. Houses buttons and interface for selecting cycles and options. Needed when cracked or worn.
Do-It-Yourself Stories from Customers like You
Kenmore dishwasher recurring front control panel problems Brad G. • Pearland , TX • April 21, 2015
I replaced the panel, for the third time in about 7 years. its a bit sad that A) kenmore/whirlpool cannot make a control panel that can last longer than 5 years of normal household use, and B) that the panel costs $135 . so that means that the $800 kenmore sits at $1070 in price, due to the two repairs that i have made over the last seven years. this control panel is about 10 or 12 switches, with a 15 pin ribbon cable that connects to the control module. i would rate this as about a $50...
Read more
More
$156.55
- Compare At:
-
$186.29
- You Save:
-
$29.74