Circuit Board Parts

The PC Board is an OEM part for Frigidaire refrigerators. It serves as the control center of your refrigerator, allowing you to adjust settings, monitor temperatures, and access various functions.

A bad PC board can be caused by electrical issues, component failure, or damage. When the user interface and display board become faulty, it can result in issues such as unresponsive controls, inaccurate temperature readings, or a blank display.

Symptoms of a bad PC include:

• Unresponsive buttons or controls on the refrigerator
• Inaccurate temperature readings or inconsistent display
• Blank or flickering display

Replace your faulty PC board with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This electronic control module replaces the oven/range control board that manages user inputs, timers/clock and heating cycles so the appliance responds correctly and restores control functions. What it does:

• Receives inputs from the front console and controls bake, broil, timers and display functions
• Regulates oven cycles and relays commands to power components (elements, ignitors, fans)
• Common symptoms of failure: unresponsive touchpad/controls, blank or erratic display, oven not heating or not following selected cycles
• Replacing a faulty module often resolves intermittent operation and control-related error codes

• Disconnect power to the appliance before starting any service to avoid shock or injury
• Access typically requires removing the console or control panel; handle the board and connectors carefully
• Avoid touching circuitry or terminals; ground yourself to reduce static risk
• Follow the appliance service manual and wiring diagrams

The Timer is an OEM part for GE dishwashers. It regulates the various cycles of the dishwasher, such as washing, rinsing, and drying, ensuring each phase occurs for the appropriate amount of time.

Causes of a bad timer can include electrical failures, wear and tear over time, or mechanical issues that disrupt the timer's ability to accurately control the dishwasher's cycles. A malfunctioning timer can result in incomplete washing or rinsing, affecting the dishwasher's overall performance.

Symptoms of a bad timer include:

• Dishwasher cycles running too long or too short
• Dishwasher not advancing to the next cycle
• Dishwasher stopping mid-cycle
• Inconsistent cleaning results

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This timer controls the sequence and duration of your appliance's cycles by routing power to each function in order. A worn timer can cause cycles to stall or repeat; replacing it restores proper, reliable cycle advancement.

• Advances the appliance through programmed stages by opening and closing internal contacts
• Coordinates operations in the correct order
• Common symptoms include cycles that won't advance, stop mid-cycle, or run unusually long/short
• Requires manual advancing of the knob to finish a cycle when failing

• Disconnect power before servicing; shut off water supply if the appliance uses water
• Access the control panel; note or photograph wire positions before removal
• Transfer any mounting hardware and the knob/shaft components from the original timer as required
• Reassemble and run a test cycle to ensure proper advancement

This control board has been manufactured by Frigidaire for use with wall ovens.The control board manages the different heat and temperature functions of the oven, as well as contains the display components that show the temperature and time. If the display fails to light up or the user is unable to select the desired temperature, it's an indicator that this part needs to be immediately replaced. Make sure to disconnect the appliance from the power source or turn off the circuit breaker before beginning the repair process. Work gloves are also recommended.This is an authentic OEM part and as such is sold individually and made from durable, high-quality, non-corrosive materials. This control board is compatible with wall ovens that have been manufactured by Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, and some other compatible brands.

This is a relay control board manufactured by Frigidaire to replace a broken or faulty part in wall ovens.In order for the appliance to work as intended, the relay control board needs to be able to receive signals from the main control board. It can then send relays that regulate the oven's various elements. Should this part be worn, faulty, or malfunctioning, the appliance won't work as intended, if at all, thus requiring replacement. To prevent injury, always wear work gloves and disconnect all power sources entirely from the appliance.This OEM relay control board is sold individually and manufactured from durable materials. It is compatible with wall ovens manufactured by various brands, including Frigidaire, Electrolux, Kelvinator, and Westinghouse.

The Refrigerator Main Control Board is essential for the optimal performance of your Samsung refrigerator. This genuine OEM part ensures seamless control over your applianceGÇÖs various functions, including temperature regulation, cooling cycles, and display operations. Designed specifically for Samsung refrigerators, this control board guarantees a perfect fit and reliable operation. By replacing a faulty main control board with this genuine OEM part, you can restore your fridgeGÇÖs performance without compromising on quality. The durable and precisely engineered assembly facilitates easy installation, allowing you to manage repairs independently and save on service costs. With consistent power distribution and efficient management of your refrigeratorGÇÖs components, the Refrigerator Main Control Board enhances the overall efficiency and longevity of your appliance. Trust in this genuine OEM part to provide dependable performance, ensuring your Samsung refrigerator functions smoothly and keeps your food fresh.

Replacement LED assembly restores screen illumination by replacing the TV's failed LED strips. Use this part to address dim, flickering, or uneven backlighting and improve overall picture visibility. What it does:

• Replaces the TV's backlight LED strips to restore even panel illumination.
• Commonly used when the screen is dim, has dark bands or spots, or the backlight flickers or fails while a faint image remains.
• Fits into the original LED channels and connects to the existing LED driver/board (direct-fit replacement when matched to correct model).
• Does not address unrelated failures such as main board, power supply, or panel matrix faults.

• Disconnect power and allow the TV to sit unpowered before starting—work only when fully de-energized.
• Handle the LCD panel and assembly carefully to avoid pressure damage; wear ESD protection when available.
• Verify LED operation before full reassembly (power up with the panel/coverings off only if you are comfortable and it's safe to do so).

The Noise Filter is an OEM part for Whirlpool built-in wall ovens. It is installed inside the oven cavity near components that produce vibrations, such as the convection fan motor. 

Causes of a faulty noise filter include the degradation of noise-dampening materials over many heating and cooling cycles. Physical damage from accidental impact during cleaning could also compromise its sound-blocking ability.

Symptoms of a bad noise filter include: 

• Excessive buzzing or humming noises emitted from the oven cavity
• Louder than normal fan or component sounds carrying into the kitchen
• Vibrations felt externally on the oven chassis during operation

This OEM replacement fits several Whirlpool, KitchenAid, and Jenn-Air wall oven models.

Replacement electromechanical oven timer that restores timed-cooking control on compatible GE ranges and wall ovens. Use it to regain reliable cycle timing for bake, broil and self-clean functions. What it does:

• Advances and times oven cooking cycles so timed bake/broil and self-clean operations run as expected.
• Common symptoms: timer does not move, timed cycles do not start or finish, or oven won't complete a timed cooking cycle.
• Replaces a failed mechanical timing mechanism in the oven control console; interfaces with existing console wiring and mounting.
• Verify model compatibility using your appliance model number before ordering.

• Disconnect power to the appliance at the circuit breaker before beginning any repair.
• Label or photograph wire locations before removal to ensure correct reconnection.
• Use basic hand tools and avoid forcing connectors; handle the assembly carefully.

This dryer timer controls the length of the drying cycle and directs power to key circuits. Replacing a worn timer restores reliable cycle advance and proper shutoff so the dryer doesn't run too long or stall.

• Advances the dryer through the selected timed cycle and turns it off at the end of the set time
• Routes power to the drive motor and heating circuit through internal switch contacts
• Coordinates cycle selection via the control knob attached to the timer shaft
• Failure symptoms include: cycle not advancing, running continuously, won't start on certain settings, or intermittent/no heat

• Disconnect power before servicing; if gas, also shut off the gas supply
• Access the control panel and remove the rear cover to reach the timer
• Photograph/label wires and transfer them one by one to matching terminals on the new timer
• Mount the timer securely, align the shaft, reinstall the knob/dial, and test all cycle positions

3 pin 60 minute

Replace a failed range clock/control with this factory Clock and Overlay Kit. It restores a readable display and responsive keypad so you can set time, temperature, and cooking modes confidently on compatible ranges and wall ovens.

• Controls oven functions by processing keypad input, driving the display, and switching bake/broil circuits via internal relays
• Common failure symptoms include a blank or erratic display
• Keypad buttons may be unresponsive or intermittent
• Oven may not start or heat due to the control not sending power
• Control-related error messages or beeping can appear

• Disconnect power at the breaker before servicing; verify no voltage is present
• Handle the control with ESD care; avoid touching circuitry and connectors
• Move wires one at a time from old to new control; take photos for reference
• Align and apply the overlay carefully to a clean surface before pressing into place

This refrigerator main control board manages the compressor, fans, and defrost system. Replacing a failed board can restore stable temperatures and reliable cooling performance when symptoms point to an electronic control failure. What it does:

• Regulates compressor and fan operation to maintain set temperatures
• Controls and times the automatic defrost cycle for the evaporator
• Interprets sensor inputs and distributes power to key components
• Failure symptoms include no cooling, warm temperatures, or erratic cycling
• Can present as heavy frost buildup, fans/compressor not engaging, or repeated relay clicking

• Includes: 1 main control board

• Disconnect power to the appliance before servicing
• Use ESD precautions; handle the board by its edges to avoid static damage
• Photograph/label connectors and move them over one at a time to the new board
• Ensure all plugs are fully seated and wiring is clear of sharp edges before restoring power

The Oven Control Board is an OEM part for Frigidaire ranges. It is the central processor that regulates all heating functions, cooking modes, timers and safety features through electronic controls.

Causes of a bad control board can include moisture infiltration over time, loose connections, or component failures due to power fluctuations or surges.

Symptoms of a bad oven control board include:

• Elements not heating or cutting off as programmed
• Inaccurate temperature readings or inconsistent regulation
• Bake and broil modes not functioning properly
• Constant error codes or safety lockouts displayed

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This clock timer is the electronic oven control that governs timekeeping and oven functions. It displays the clock and settings and directs power to the bake/broil circuits so the oven responds to your commands.

• Controls and displays the clock, kitchen timer, and oven settings
• Sends power to bake and broil relays based on selected temperature and mode
• Coordinates preheat and cycle timing for consistent results
• Common signs it may be needed: blank or dim display, unresponsive buttons, error codes/beeping, oven won't start or heat though elements and power test good

• Disconnect power at the breaker before servicing—this is a high-voltage electronic part
• Access through the control panel or backguard; remove panel screws to reach the control
• Move wire connectors one at a time to the new control; reuse any mounting hardware
• Handle the board carefully to avoid static discharge; after installing, restore power and set the clock, then test oven functions