Igniter Bake Parts

The Surface Element is an OEM component specifically designed for Whirlpool ranges and cooktops. It provides the heating source for cookware on the stove surface.

Causes of a bad element include deterioration of insulation material over time, carbonization or damage from pans slammed onto the element, or contact with moisture. 

Symptoms of a bad element include:

• Inability to heat cookware sufficiently 
• Uneven or incomplete heating of pans placed above
• Burn marks or discoloration visible on the element
• Crackling or popping noises heard from below pans

This part is also compatible with some Kenmore, Frigidaire, and select GE range models. Proper cooking performance and safety are maintained with an OEM surface element replacement when needed.

The Coil Surface Element is a 6-inch OEM part for Whirlpool ranges. It is responsible for radiating heat from its coils to cook food positioned above the stovetop grates. 

Symptoms of a faulty coil surface element include:

• Slow or uneven heating of pots and pans  
• Hot and cold spots on cooking surfaces
• Element coils glowing dimly or not at all
• Buzzing or crackling noises coming from below cookware

Causes can be mineral deposits coating the coils over time, physical damage like bending or breaks, or standard wear of heating filaments inside. 

This genuine OEM Whirlpool part is also compatible with the electric ranges of Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, and Kenmore brands.

This bake element installs at the bottom of the oven cavity to provide the primary heat during Bake. Replacing a worn or failed element restores proper preheating and consistent baking performance.

• Provides lower-oven heat during Bake cycles
• Helps maintain set temperature for even, reliable results
• Common failure symptoms: no heat in Bake, unusually long preheat times, uneven or undercooked food
• Visual indicators can include blistering, cracks, or burn-through on the element

• Disconnect power at the breaker and allow the oven to cool completely
• Remove mounting screws, gently pull the element forward, and move wires one at a time to prevent them from slipping back into the cavity
• Avoid sharply bending the new element; ensure terminals are fully seated and connections are secure
• Reinstall hardware, restore power, and test Bake

The Broil Element is an OEM replacement part for LG electric ranges. As a vital upper heating system, this broil element helps efficiently brown and crisp foods placed directly under or on the top rack of the oven.

Causes of a defective broil element may relate to normal wear and tear on the coils from repeated high-heat cooking. Food residues adhering over time can reduce performance.

Symptoms of a problematic broil element include:

• Inadequate or uneven browning from the top-level heating system   
• Diminished functionality of the broil setting on the control panel
• Potential thermal damage or exposed wiring from a failed element

This OEM component fits some Kenmore/Sears electric range models as well. 

Note: 6" surface element

The Electrode & Harness Assembly is an OEM part for GE gas ranges. It features ignition electrodes and a wiring harness that facilitates oven ignition. This assembly is responsible for sending high-voltage sparks to light the oven's pilot and main burners on command.

Symptoms of a bad electrode and harness assembly include:

• Oven pilot or burners failing to ignite properly
• Delayed ignition or repeated ignition attempts needed 
• Indicator lights signaling ignition errors

Causes can be cracks, wear, or damage to the insulated electrodes from repeated heating cycles. Over time this may lead to arcing or shorting of electrical connections.

Proper sparking ensures safe and reliable cooking functions. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This surface burner igniter creates the spark that lights a gas cooktop or range burner. The attached wire lead simplifies hookup and helps restore quick, dependable ignition when a burner won't light or only lights intermittently.

• Generates a high-voltage spark at the burner to ignite gas
• Restores reliable burner lighting and consistent flame startup
• Common symptoms: burner won't ignite, no visible spark, intermittent lighting, or a chipped/cracked ceramic insulator
• Replaces a worn or damaged electrode to eliminate the need for manual lighting

• Disconnect electrical power and shut off gas before servicing
• Allow the cooktop/range to cool; handle the ceramic tip carefully to avoid damage
• Match the igniter position/orientation to the original for proper spark at the burner
• Route the lead away from sharp edges and heat; make a secure connection to the harness, then test for spark before reassembly

This replacement spark electrode for gas burners creates the spark at the burner head to ignite the gas. It helps restore quick, reliable lighting when a burner won't ignite or only lights intermittently. What it does:

• Generates a high-voltage spark at the burner to ignite gas
• Replaces cracked, fouled, or shorting electrodes that prevent proper arcing
• Can help resolve a burner that won't light, clicking without ignition, or weak/no spark at one burner
• Supports consistent burner ignition when properly aligned and connected

• 1 ignition spark electrode

• Disconnect power and shut off gas supply before servicing
• Allow the appliance to cool; remove grates/caps and access the electrode at the burner
• Transfer any mounting hardware; seat the electrode securely and avoid stressing the ceramic insulator
• Route the lead away from heat/sharp edges and ensure all connections are fully seated

A surface ignitor that produces the spark needed to light gas burners on compatible ranges and cooktops. Replaces a worn or failed ignitor to restore reliable ignition and consistent burner lighting. What it does

• Creates the spark at the burner to ignite gas when the control is turned on.
• Commonly used when burners click but fail to light or when a specific burner never ignites.
• Works with the cooktop's ignition system to provide consistent, repeatable sparking.
• Fits into the burner assembly and connects to the appliance's existing wiring and mounting.

• One surface ignitor (quantity: 1)

• Disconnect power to the appliance and shut off the gas supply before starting any service.
• Handle the ignitor by the ceramic/insulated areas; avoid touching the tip with bare hands to prevent contamination or damage.
• Confirm correct fit and secure all wiring connections; test ignition on a safe flame setting after reinstalling.

This lower bake element assembly heats the oven cavity for baking and roasting so you can cook food evenly. It replaces a damaged or failed lower heating element to restore normal oven heating performance. What it does:

• Produces the oven's lower radiant heat used during bake cycles
• Common fix when the oven won't reach or hold set temperature
• Replaces elements that are visibly burned, broken, or arcing
• Helps correct uneven baking when the lower element is not working

• Disconnect power to the appliance at the circuit breaker before servicing
• Allow the oven to cool completely; handle the element carefully to avoid damage
• Inspect wiring and connectors for heat damage and secure connections during installation
• After installation, restore power and run a short bake cycle to verify correct operation

This surface ignitor is the replacement spark electrode that provides the spark to light a gas cooktop or range burner. Replacing a failed ignitor restores reliable ignition and helps get burners lighting again. What it does:

• Produces the high-voltage spark that ignites gas at the surface burner
• Replaces cracked, glazed, or non-sparking electrodes that prevent ignition
• Addresses symptoms such as no spark, weak or intermittent sparking, or burners that won't light
• Works with standard surface burner assemblies to restore normal ignition

• One surface ignitor (spark electrode)

• Disconnect electrical power and shut off the gas supply before starting work
• Handle the ceramic electrode carefully; avoid touching or striking the ceramic tip
• Ensure all wiring connections are secure and routed clear of heat sources
• After installation, test each burner for proper spark and ignition before returning the appliance to regular use

This broil element replaces the upper heating element in an electric oven to restore broiling performance and even top-down browning. It heats the top of the oven cavity so broil cycles and high-heat functions work correctly. What it does:

• Provides the high heat at the top of the oven for broiling and browning
• Replaces a burned-out or visibly damaged broil element
• Commonly used when the oven broil setting produces no heat or uneven browning
• Matches OEM form and terminal layout for direct replacement

• Disconnect power to the range at the breaker or unplug before starting
• Handle carefully to avoid bending the element or damaging terminals
• Remove oven racks and any necessary panels for access; support the element while disconnecting wires
• Tighten mounting screws and secure electrical connections before restoring power