High Voltage Control Board Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 297216019
This mechanical temperature control thermostat regulates your unit's cooling by cycling the compressor on and off to maintain the set temperature. Replace a failed cold control when temperatures drift, cycling is erratic, or the knob no longer responds.
- Monitors cabinet temperature via a sensing bulb and opens/closes electrical contacts to control cooling
- Helps restore consistent temperatures and normal run times
- Typical failure symptoms: too warm or too cold, runs constantly or won't start, no change when adjusting the control
- May cause intermittent cooling or short cycling as it wears
What's included: 1 temperature control thermostat Installation notes:
- Disconnect power before servicing
- Access the control housing; note/photograph wire locations and transfer them one at a time
- Route the sensing capillary exactly as original; do not kink or sharply bend the tube; secure the bulb in its original location
- Set the control to a mid setting and allow temperatures to stabilize before fine-tuning
Do-It-Yourself Stories from Customers like You
Cold control. John C. • Homer , NY • December 12, 2020
Removed the panels the control was in. Snapped out the old one Snapped in the new one easy to do.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316443901
This is a relay control board designed for dual oven configurations. It manages the electrical signals that switch heating elements and other oven components on and off during cooking cycles. Replace this board if one or both ovens fail to heat, heat intermittently, or if error codes related to relay failures appear on the control display.
Do-It-Yourself Stories from Customers like You
Oven stops heating during cooking Philip B. • Madison , MS • October 21, 2016
I noticed my oven would suddenly stop heating during cooking, but the over lights and temp gauge would all appear to be working properly. You could bump the circuit board and it would resume heating, but eventually would stop heating again, which told me I had a short or a break in the solder on my circuit board. Easy fix to replace board, simply took a picture with my ipad, of the old board and wire locations, killed the power, removed old board, installed new board, every wire harness was...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304520582
If your dishwasher won't start, cycles won't advance, or buttons don't respond, the control board may have failed. This board regulates all functions.
Do-It-Yourself Stories from Customers like You
Buttons would not respond Scott J. • Vancleave , MS • October 31, 2026
Replaced the control board.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10775847
Fix unresponsive buttons or lost cooling control. This refrigerator electronic control board restores user interface and cycle management. Moderate DIY.
Do-It-Yourself Stories from Customers like You
Maytag refrigerator water / ice touch pad stopped working John E. • Sidney , OH • November 22, 2016
Installed a new touch pad/circuit board combination as recommended by Appliance Parts Pros. The water/ice control now works perfect. The touch pad was somewhat difficult to remove due to surface adhesive. Used a knife to loosen the touch pad so it could be pulled from the plastic panel. Residual adhesive also needed removal with a solvent such as mineral spirits, and Installing the new touch pad also required careful alignment to properly fit the mating plastic panel. No instructions were...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10804115
Dishwasher won't start or LED lights not working? This electronic control board restores responsive controls and proper cycle execution. Moderate difficulty.
More
Genuine Ge part
By: Ge
Part Number: WD21X10408
Fix unresponsive buttons or blank display on your dishwasher. This control board and keypad kit restores electronic controls. Moderate DIY, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Dishwasher controls were unresponsive would not start Kevin K. • Dallas , GA • June 28, 2016
I replaced the circuit board behind the pushbuttons. At first there was no change in the controls, then i remembered that the door needed to be closed for it to work. Yah! It works now. $119 parts and installed it myself vs. $450 for a new machine.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3955340
If your washer won't advance through cycles or stops mid-wash, the timer may be faulty. This control sequences fill, wash, drain, and spin stages.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8531262
Fix dishwasher lights that won't blink or buttons that don't respond. This user interface board reads your selections and starts cycles reliably.
Do-It-Yourself Stories from Customers like You
I could not get dishwasher start button to work start button would not flash lights for cycle and options buttons to start wash cycle Vernon T. • Lithonia , GA • October 25, 2014
I had ordered several parts from Appliance Pros and installed parts that did not solve the problem. Return the parts and was going to give up. Called Appliance Pros Tech and she suggested that I try installing a User Interface Board. She sent me the new board and problem solved. Dishwasher working like new.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10476828
Dryer stops early on auto cycle but works on timed? The moisture sensor control board monitors dryness levels. DIY-friendly repair, 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Kenmore elite dryer routinely stopped after a few minutes when set on the moisture cycle but finished completely when set on timed cycle James L. • Brandywine , MD • December 06, 2014
Did some research via the internet and figured the problem was likely the moisture control board. Watched a video of the repair of a similar unit in order to locate the moisture control board. Used the chat feature with one of the Appliance Parts Pros to get a schematic of the dryer and advice about where to use the putty knife to release the springs for access to the board. Thanks to the lady I chatted with for expert advice. Once the actual task was started, the repair took 15 or 20...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 242115285
Refrigerator not cooling or completely dead after a power surge? This main power control board restores electrical control to compressors and fans.
Do-It-Yourself Stories from Customers like You
Power surge fried some parts in my fridge Karl D. • Watkins , MN • February 12, 2018
I ordered parts that match my factory parts that were bad perfect match for less than what the Dealer wanted.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304512770
Fix error codes, blank displays, or no power issues in your refrigerator with this main control board. Regulates all fridge functions and temperatures.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10888661
If your range display blanks out, shows error codes like F8:E0, or doesn't respond to controls, the electronic control board likely failed. Restores normal operation.
More
Genuine Ge part
By: Ge
Part Number: WD21X10363
Fix a dishwasher that won't cycle properly, hangs mid-wash, or resets to default settings. This electronic control board restores normal operation. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Dishwasher wouldn't cycle properly, would hang during washes Renae M. • Kettering , OH • April 20, 2021
I noticed something was wrong when the dishwasher no longer remembered the last cycle performed. After it finished, it would go to a default cycle. A couple of weeks ago, my husband said it wouldn't start. Then I noticed on subsequent washes, there was a high probability that it would hang at a random part of the wash cycle. I was able to reset it though. The last time it stuck was during the pre cycle, where it drains any water and runs the disposer. It hung there all night! I tried cycling...
Read more
More
Genuine Ge part
By: Ge
Part Number: WD21X33642
Dishwasher won't advance through cycles or stops mid-wash? The control timer regulates washing, rinsing, and drying phases. Moderate DIY repair.
More
Genuine Ge part
By: Ge
Part Number: WE4M488
Fix E01 error codes or a dryer that won't start with this control board replacement. Controls drying time and temperature settings. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
This time it’s the dryer. Prior it was the washer and dishwasher and AppliancePartsPros has made it possible to fix them all Scott L. • La Grange , KY • December 05, 2021
Replaced the power board. I’ve repaired the belt, door, bearings, and door lock on this dryer.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4-35940-001
Freezer not maintaining temperature or running constantly? This mechanical thermostat senses internal temperature and cycles the system to restore control.
Do-It-Yourself Stories from Customers like You
Chest freezer thermostat went bad Robert W. • Alex City , AL • July 04, 2025
Replaced the thermostat with a new one.
Read more
More