Hardware Hand Small Engine Spark Plug Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304453707
This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.
- Fastens metal or plastic parts to the cabinet/frame
- Helps maintain alignment and reduce vibration or rattling
- Direct replacement for lost, damaged, or rusted hardware
- Keeps covers and brackets safely in place
What's included: 1 screw Install notes:
- Disconnect power before servicing; for gas appliances, also shut off gas supply
- Match one-for-one with the original screw; verify length/type before installation
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Use the correct driver bit to prevent stripping the screw head
Do-It-Yourself Stories from Customers like You
Ice dispenser not working auger not turning Roger H. • Chesapeake , VA • August 21, 2016
Replace dispenser micro switch. Also replaced broken faceplate and rusty screws. Appliance parts Pro YouTube video was helpful in diagnosis and disassembly. Parts arrived quickly.
Read more
More
$23.61
- Compare At:
-
$27.86
- You Save:
-
$4.25
Genuine Ge part
By: Ge
Part Number: WD35X10346
Fixes spotty dishes and rinse aid leaks. This reservoir holds and releases rinse agent during the final cycle. Quick DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
Burned out motor and broken (stripped thread) rinse aid dispenser Norman G. • Winters , CA • October 20, 2015
Repair parts arrived super fast.
Installed the new parts according to the supplied instructions. All went well.
It took over 2 hours because the unit had to be removed after the water and power were disconnected and then the initial problem diagnosed (motor brushes worn beyond service limits). The removal of the spray bar tower assembly was a challenge until it was discovered that the tower unscrews in a CW direction from the bar that then allowed access to the attachment screw that holds that...
Read more
More
$41.95
- Compare At:
-
$50.34
- You Save:
-
$8.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10616003
Soap dispenser door won't latch or detergent stays in compartment? This dishwasher dispenser assembly releases detergent at the right time. Moderate DIY.
This part fixes the following symptoms
-
Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You
Soap dispenser door would not latch closed Lee J. • Lumberton , NJ • January 27, 2015
Looked online for a replacement soap dispenser. Found one on several sites but The A.P.P. site showed the part on a Parts breakdown page and showed the part item number. and the actual part number. I ordered the part and expected the part to show up in about 5-7 days, as per the receipt. The part showed up in 2 business days. I installed the part and the dishwasher works as new. Thanks A.P,P.
Read more
More
$176.46
- Compare At:
-
$208.22
- You Save:
-
$31.76
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507924
Mounting screw for electric and gas ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or broken.
More
$5.35
- Compare At:
-
$6.42
- You Save:
-
$1.07
Genuine Ge part
By: Ge
Part Number: WB01T10008
10-32 machine screw secures panels, brackets, door hinges, and handles in ovens and ranges. Replace missing, stripped, or broken screws for tight fit.
Do-It-Yourself Stories from Customers like You
Oven door wouldn't close tightly new hinges didn't fix the problem Paul S. • East Wenatchee , WA • October 26, 2020
All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door.
The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time.
I replaced the inside steel panel. Took about an hour. Was able...
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 240381301
Color: White. Used to cover the hinge bearing hole.
Do-It-Yourself Stories from Customers like You
Broken tray in refrigerator Patricia R. • Southwick , MA • April 10, 2016
Quick fix! I spent 5 minutes on the computer, ordered the new part. It came in 2 days and snapped right in place! I don't know why I waited so long
Read more
More
$13.37
- Compare At:
-
$15.78
- You Save:
-
$2.41
Genuine Whirlpool part
By: Whirlpool
Part Number: W11412300
Fix dishes not cleaning properly or spotty glassware with this dishwasher detergent and rinse aid dispenser. Restores proper soap release timing.
More
$109.73
- Compare At:
-
$130.58
- You Save:
-
$20.85
Genuine Samsung part
By: Samsung
Part Number: DE92-90508A
Secures microwave to mounting bracket. Replaces stripped, cross-threaded, or missing cage nuts. Installs inside cabinet housing for stable installation.
Do-It-Yourself Stories from Customers like You
Removed 1 year old microwave to paint kitchen internal thread assembly stripped Joel L. • North Richland Hills , TX • December 01, 2016
I took the machine screws out of the outer panel for the right side only. Then pull the panel back a bit to release the lips from the front of the machine and had immediate access to the internal assembly that housed mounting nut.
Order the new parts from AppliancePartsPro.com during the Thanksgiving week. Still received via FedEx in short time due to their same day shipping - which was greatly appreciated and surprising. Most small part places take a while to get the product out the door,...
Read more
More
$20.39
- Compare At:
-
$24.26
- You Save:
-
$3.87
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$21.46
- Compare At:
-
$25.54
- You Save:
-
$4.08
Genuine Whirlpool part
By: Whirlpool
Part Number: 67003900
Plastic insert that seats inside the refrigerator air damper cover to guide airflow from freezer to fresh food. Replace when cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
Damper cover broke when I replaced the damper. Keith A. • Springfield , VA • November 14, 2020
The damper Cover snapped on in less then a second. Perfect fit!
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304532199
This dispenser actuator lever operates the refrigerator door dispenser so you can dispense water or ice with a simple push. It restores proper button/lever response for convenient, reliable dispensing. What it does:
- Replaces a worn or broken dispenser actuator to restore dispenser button/lever function
- Helps stop intermittent or failed dispensing caused by a damaged actuator
- Supports correct engagement of the dispenser switch for consistent operation
- Useful when the lever is cracked, loose, or does not return to position
What's included:
- One dispenser actuator lever
Install notes:
- Disconnect power to the appliance before beginning any work
- Access may require removing the dispenser trim or inner door panel; handle panels carefully to avoid damage
- Verify correct orientation and secure mounting of the actuator during reassembly
Do-It-Yourself Stories from Customers like You
Er and rn Christine B. • Lake Worth , FL • May 19, 2017
My husband expected we needed a new dishwasher but I insisted on trying to fix it first. You need a Torx screwdriver so make sure you have a set. A little difficult to get cover back on and lined up by myself, but I managed and this was my first attempt at major appliance repair.
I replaced the entire console and the dispenser. Still working after 3 loads so my husband may have to eventually admit that I fixed it.
Read more
More
$41.51
- Compare At:
-
$46.12
- You Save:
-
$4.61
Genuine Ge part
By: Ge
Part Number: WB1M1
ST10-16 X 7/16"
Do-It-Yourself Stories from Customers like You
Bottom heating element not working on a ge electric range David K. • Portsmouth , RI • December 21, 2014
Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy.
Read more
More
$7.65
- Compare At:
-
$9.10
- You Save:
-
$1.45
Genuine Frigidaire part
By: Frigidaire
Part Number: 316284100
Spacer that provides clearance between the range oven door handle and door surface. Replace if cracked, broken, or missing to ensure proper handle fit.
Do-It-Yourself Stories from Customers like You
Broken oven handle Paisley M. • Reno , NV • January 27, 2020
Bought a new handle and installed it.
Read more
More
$21.95
- Compare At:
-
$26.12
- You Save:
-
$4.17
Genuine Bosch part
By: Bosch
Part Number: 00165263
Plastic cover that protects the drain pump mechanism from debris. Replace if cracked, broken, or tabs are bent preventing proper seal during drain cycles.
Do-It-Yourself Stories from Customers like You
No spray during wash cycle pump impeller was broken. Robert K. • Cazenovia , NY • February 22, 2019
Watched AppliancePartsPros video, disassembled the dishwasher and replace impeller and seals.
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Frigidaire part
By: Frigidaire
Part Number: 316001009
Secures the oven door handle to the door or front panel. Replace if your screw is stripped, missing, or damaged to restore a firm grip and proper alignment.
Do-It-Yourself Stories from Customers like You
Renter broke the handle off the oven Brian W. • Brunswick , GA • November 16, 2014
Who does that? I've lived in my house for many years and never have done the damage that a renter can do in just 1 year. Looked up the Serial number and found the parts I needed easily. Ordered them and they arrived in about 3 days. Fit perfectly.
Read more
More
$10.70
- Compare At:
-
$12.63
- You Save:
-
$1.93
Genuine Ge part
By: Ge
Part Number: WB02T10017
This is a genuine OEM replacement nut that is used on convection oven fans. This nut holds the fan onto the spindle. If the nut becomes lost during repairs to the fan, it will need to be replaced before the fan will work. This nut locks the fan to the spindle to turn and move the air around inside the oven. The fan helps the food to cook more evenly and reduces areas in the oven that are not cool enough or hot enough. If the fan is not working, the convection oven will not cook correctly.Convection ovens are different from regular ovens, and the fan is part of the reason. Convection ovens use the fan and an exhaust system to move the heat around inside the oven to cook food more evenly and faster. Many convection ovens have a setting that allows the oven to be used as a regular oven. If the nut is missing and the fan is inoperable, the oven can be used for regular cooking if it has this feature. Otherwise, the convection oven should not be used until the nut is replaced.This nut is a silver metal replacement part that is sold individually. It is designed for use in convection ovens made by GE and Kenmore.
Do-It-Yourself Stories from Customers like You
Convection fan screaming like the undead are coming Diego G. • Eden Prairie , MN • February 04, 2017
I took the cover off and the fan had separated from the bushing.
Ordered a new fan and nut and it took all of 5 minutes to replace.
Probably saved $159.99 service call repair and that is with a coupon.
Any one can do this repair, just make sure the oven is cold as you will come in contact with metal parts.
Read more
More
$8.95
- Compare At:
-
$10.56
- You Save:
-
$1.61