Slow Clamp Snowblower Engine Foil Parts
Genuine Ge part
By: Ge
Part Number: WB02X11026
Secures the fan blade to the motor shaft, preventing vibration and noise. Replace if blade is loose or clip is missing to restore proper airflow.
Do-It-Yourself Stories from Customers like You
Plastic fan blade broke while being cleaned Margaret R. • Murrells Inlet , SC • April 30, 2017
Removed the brackets that sheltered the fan blade, removed the fan clip (was a little difficult but a needle nose plier was helpful), removed broken fan blade collar. Attached new fan blade and clip. Getting the new fan blade seated on the stem was difficult. I used a socket (so that the stem had room to move down onto the fan) and a rubber mallet on the socket to achieve a complete seating. Reattached brackets. Also ordered a charcoal filter to replace the standard filter. The charcoal...
Read more
More
Genuine Ge part
By: Ge
Part Number: WH1X2725
Secures your washer's drain hose to standpipe, maintaining proper air gap to prevent siphoning and backflow. Replace if clip is broken or missing.
Do-It-Yourself Stories from Customers like You
Burned out capacitor Mary V. • Ellenton , FL • June 06, 2016
My son fixed it
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7212P006-60
Horizontal oven door seal for top and bottom edges. Replace when worn to restore even heating and efficient baking. Hooks into slots on door frame.
Do-It-Yourself Stories from Customers like You
Oven would not heat up past 100 degrees and the light switch was broken Gary B. • Redondo Beach , CA • August 28, 2015
A new ignitor was installed, and a new light switch was installed
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10491987
This foam seal fits between mating parts to create a tight barrier that helps prevent leaks and rattling. Replacing a worn or missing seal restores proper sealing and helps keep your appliance running quietly. What it does:
- Creates a compliant gasket between components to limit air or moisture passage
- Helps dampen vibration and reduce rattling/buzzing where parts meet
- Helps maintain proper airflow or fluid routing as designed
- Typical symptoms include leaks, condensation/frost near a joint, or new vibration noises
What's included:
Install notes:
- Disconnect power; turn off the water supply before service
- Note the original seal's routing/orientation before removal
- Clean and dry all mating surfaces; remove old foam and residue
- Install without stretching or over-compressing; ensure even contact with no gaps
Do-It-Yourself Stories from Customers like You
Upper cooling blower was making loud noise no error code Raymond M. • Mundelein , IL • February 06, 2016
I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary.
IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X8818
The recess door retainer secures the dispenser's ice chute flapper in the refrigerator door. Replacing a cracked or missing retainer restores proper flapper pivot and sealing to help reduce frost buildup and air leaks around the dispenser.
- Holds the recess/ice door on its pivot within the dispenser assembly
- Helps the flapper close fully to seal the ice chute
- Restores smooth open/close action of the dispenser door
- Common symptoms: loose or fallen flapper, poor chute seal, frost or condensation in the dispenser area, and ice clumping near the chute
What's included: 1 recess door retainer Install notes:
- Unplug the refrigerator before servicing the dispenser
- Carefully remove the dispenser bezel/control panel to access the ice chute door assembly
- Note spring orientation and retainer position; transfer components to the new retainer
- Verify flapper movement and seal before reassembly and restoring power
Do-It-Yourself Stories from Customers like You
Yes ice was not coming out of the dispenser Jason S. • Goose Creek , SC • December 02, 2014
I replaced the solenoid, door, spring and bucket. The bucket cracked from ice freezing inside it. Ice froze inside the bucket because the solenoid stopped pulling the door closed which allowed hot humid air into the freezer. While I was in there I replaced the dispenser door, spring and crank because they are cheap and the old ones were moldy. The mold is most likely from the door not closing and causing condensation on the parts as well.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134242400
Secures the dryer motor in proper position for stable operation. Replace if motor shifts, buzzes, or clamp strips out. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Buzzing noise when the motor was powered Richard K. • Wilton , CT • April 22, 2024
Replace idler, motor mounting clamp and lock
Read more
More
Genuine Ge part
By: Ge
Part Number: WC15X20161
Complete sink flange mounting kit for garbage disposals. Includes gaskets, seals, and hardware for secure installation. Replace if leaking or corroded.
Do-It-Yourself Stories from Customers like You
Leaking disposal Richard W. • Fernandina Beach , FL • January 09, 2016
We have a 3/4 HP GE disposal. It was installed when we built the house approximately ten years ago. It has been fantastic except for one thing. Every six months or so it would start leaking. I would tighten the Support Ring and off we would go for another six months. This time the Sink Flange began to "separate" (break apart at the top). I called my plumber but they said they only work on one brand (it was not GE) so my only option was to buy a new unit from them. That was unacceptable!! I...
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00491569
Replace your worn oven door gasket to restore a tight seal, prevent heat loss, and maintain consistent baking temperatures. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Oven door gaskets had deteriorated Linda L A. • San Bernardino , CA • November 18, 2016
After watching your great video showing how to install, we ordered the product from you. Great service and an easy install!!! Thanks so much!!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP71001841
Replace your worn oven door gasket to improve heating efficiency and prevent heat loss. Restores proper seal between door and cavity. Confirm fit by model.
Do-It-Yourself Stories from Customers like You
The control panel was no longer working lights were not coming on no beeps could be heard hen you hit a key on the control panel it first started with the 3 6 and 9 keys and became worse Randy S. • Houston , TX • June 24, 2017
I replaced the old control panel with a new one. I also changed out the door seal to help prevent the control panel from going bad a second time. It was the heat from the oven getting to the keypad on the control panel that caused it to go bad.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB01K10112
Secures the ignition electrode on gas range burners. Replace if burners won't spark, igniter clicks continuously, or clip is corroded or loose. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Stove wouldn't spark Steven L. • Olympia , WA • December 17, 2014
Replaced spark module and all electrodes/igniters.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB32T10012
Seals the oven door perimeter to retain heat and maintain consistent temperatures. Replace if frayed, damaged, or heat escapes. Confirm fit by model number.
Do-It-Yourself Stories from Customers like You
Oven door gasket needed replaced Stephen G. • Springfield , OH • March 20, 2015
First watched youtube instruction video.
Ordered gasket.
Delivered in 2 days.
Removed old gasket and replaced with new in about 15 minutes.
Wife happy.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 240349801
Secures the crisper slide rail to the refrigerator liner for smooth drawer operation. Replace if broken or missing to restore proper alignment and support.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 279220
Includes two bumpers and two locking clips. You will use one or the other depending on hole size.
Do-It-Yourself Stories from Customers like You
Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017
Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285353
This retainer ring is a genuine OEM replacement part sourced directly from the manufacturer for use on front load washing machines to hold the boot seal in place. The boot seal is the gasket that seals the washing machine when the door is closed to prevent water from leaking. The retainer ring is located flush against the boot seal and has either a spring clamp or screw clamp that secures it. Over time, this ring may become damaged due to the washing machine's normal use and age. If the ring is not tight, the washing machine could leak when in use. If water is coming from the door, it is a good idea to inspect and replace the retainer ring and possibly the boot as well.Unplug the washing machine to prevent electrocution. Remove the front panel, the detergent dispenser, and the kickplate to access the retainer ring. Locate the clamp on the ring and loosen it. Remove the retainer ring and set it to the side. Inspect the boot and then install the new retainer ring. Tighten the clamp and reassemble the washing machine. This retainer ring is sold as an individual unit. It is designed specifically for washing machines manufactured by Whirlpool.
Do-It-Yourself Stories from Customers like You
Washer would agitate but would not go into high spin sounded like spin was working though Mario M. • Corona , CA • January 03, 2015
Im not a repairman, so all my knowledge to fix my washer came from either youtube or online chats. I posted this to help the next dad trying to save a few bucks.
Door sensor...
Since door sensor worked correctly, verified that by starting washer with door open, and agitate cycle would not start until door was closed. Meaning door sensor worked correctly.
Timer...
In high spin cycle washer sounded correcltly spinning, but when opening door, drum was was not moving. So timer was triggering...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11104748
Seals window glass to door frame, preventing rattles and heat loss. Replace if cracked, torn, or no longer cushioning properly. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Broken rubber seals April T. • Lake Station , IN • October 07, 2024
By myself with my own two hands, a towel, and a screwdriver! I was able to find a video tutorial for how to disassemble my oven. And bonus, I got to do a bang up job on the glass while at, inside and out! As a woman, I was pleasantly surprised at how easy this was.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4455381
Heat-resistant gasket seals oven door to maintain temperature and prevent heat/steam leaks. Replace when worn, cracked, or hardened. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Whirlpool double oven top oven door seal hard and crusty Michael A. • St Louis , MO • October 01, 2016
Replaced seal. Ordered seal on Monday, had it Tuesday. It was the exact seal for the oven. It took longer to clean up the oven around seal groove than to remove and replace the seal.
Read more
More