Hardware Hand Snowblower Engine Foil Parts
Genuine Ge part
By: Ge
Part Number: WB04K10021
This is a front frame gasket that seals the oven door against the oven cavity to prevent heat from escaping. It is typically made of a flexible, heat-resistant material that fits along the perimeter of the door or frame. Replace this gasket if you notice heat leaking around the oven door, uneven cooking temperatures, or visible wear, cracking, or hardening of the old seal.
Do-It-Yourself Stories from Customers like You
Needed new gasket under oven door Philippe J. • Oklahoma City , OK • January 24, 2016
It was a simple snap on. I ordered the part and it came in the next day!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316001009
Secures the oven door handle to the door or front panel. Replace if your screw is stripped, missing, or damaged to restore a firm grip and proper alignment.
Do-It-Yourself Stories from Customers like You
Renter broke the handle off the oven Brian W. • Brunswick , GA • November 16, 2014
Who does that? I've lived in my house for many years and never have done the damage that a renter can do in just 1 year. Looked up the Serial number and found the parts I needed easily. Ordered them and they arrived in about 3 days. Fit perfectly.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB32T10006
Seals the oven door to prevent heat loss and maintain proper cooking temperatures. Replace if you notice drafts or uneven heating. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Had to replace gasket on oven door James N. • Verona , WI • December 13, 2014
Looked at one video on You Tube, identified the part, ordered the part, part came very quickly and it took less than 2 minutes to remove the old part and install the new one.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 318053103
Oven door gasket creates a tight seal to maintain temperature. Replace if torn, flattened, or crispy. Clips into door frame. Confirm fit by model number.
Do-It-Yourself Stories from Customers like You
18 year old oven; works great but racks ugly/discolored and impossible to clean well enough; door seal flattened and discolored Cathryn S. • Breckenridge , CO • September 01, 2018
Bought two new racks - beautiful! Bought replacement door seal: watched simple video and installed new seal in less than 10 minutes. Extremely pleased and impressed with entire experience as a first-time customer.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB02T10027
Seals the oven light lens to the cavity, blocking heat and moisture from the assembly. Replace if worn, cracked, or the lens won't seal properly.
Do-It-Yourself Stories from Customers like You
Light socket fault and shorted out control board Kirby L. • Land O Lakes , FL • March 07, 2015
I researched on Appliancepartspros.com how to fix a control board. I came across some online videos showing exactly how easy the process really was. I also typed in the model number on the site and was able to pull up the parts diagrams to figure out which other part numbers I needed. I ordered the control board, light socket, light gasket, and light bulb. I was shocked to know that the control board came in the next day! The other parts arrived the following day as well, which definitely...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB01K10037
Replacement fastener nut for gas ranges and cooktops. Secures panels and internal components. Needed when original nut is missing, stripped, or worn.
More
Genuine Ge part
By: Ge
Part Number: WB1X1130
Replacement screw for securing panels, brackets, and internal components. Needed when original hardware is stripped, missing, or damaged during repairs.
Do-It-Yourself Stories from Customers like You
Broken door hinge on a ge wall mount double oven Cheryl A. • Mckinney , TX • June 18, 2018
We replaced the broken door hinge.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316136600
This is a nut that is used in many microwave ovens. It is typically used to hold interior fan in place. A nut is a fastener that is used to hold two items together or keep one component secure against a surface. Use and time can cause the nut to become stripped, damaged, or broken. If the nut is broken, it will no longer hold the fan in the right location. The nut will need to be replaced.Before replacing this part, the microwave should be unplugged. Open the refrigerator door and remove the cover that goes over the fan. The nut can then be removed using a nut driver. Replace the other parts before using the appliance.This nut is used in microwave ovens manufactured by Crosley, Electrolux, Frigidaire, and Kenmore. It is sold as a single part. This is an authentic OEM replacement part is sourced directly from the manufacturer.
Do-It-Yourself Stories from Customers like You
Oven won't turn on, control board failure convection motor failure Jonathan O. • Lorena , TX • November 12, 2018
Everything was straight forward and easy to repair, I had an appliance tech come out and troubleshoot the repair and watched what he did and asked questions. I then ordered the parts from here and did the repairs myself and saved on having the tech make another trip out.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 318313231
This is a black rubber gasket that seals the area between the control panel and the range body, preventing heat, grease, and moisture from reaching the internal wiring and controls. It helps protect sensitive electronic components from damage caused by exposure to cooking heat and spills. Replace this gasket if it is cracked, brittle, missing, or if you notice heat or moisture getting behind the control panel.
Do-It-Yourself Stories from Customers like You
Gasket broken David G. • Brenham , TX • November 16, 2018
Rep[laced it
Read more
More
Genuine Ge part
By: Ge
Part Number: WB01T10067
Attaches oven door panels together on your range. Replace this threaded screw if the original is stripped, missing, or no longer holding panels secure.
Do-It-Yourself Stories from Customers like You
The liner on the inside oven door and the handle was loose Ruth Anne G. • Crofton , NE • April 16, 2016
My son-in-law helped me. He pulled the liner open enough that he could see he just had to tighten up the existing screw on the door handle.. For the liner, we put a new screw in each side and tighted it up. At first we were afraid it was in the hole the screw went into but finally got it to screw in tightly. Back in business!!!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002793
Adhesive-backed foam tape seals gaps between cooktop glass and countertop, reducing noise and vibration. Replace when worn to prevent air leaks. Verify fit.
Do-It-Yourself Stories from Customers like You
Large bottle of grey goose fell and broke a kitchen aid glass cooktop James D. • Lawrenceville , GA • November 15, 2015
Ordered a replacement cooktop from Appliance Pros. Great delivery, best price I could find. Installation was not difficult but was more time consuming than expected [ based on some you tube videos ].
Getting ready to retire and my wife has me repairing everything in the house. Everything I have recently purchased from Appliance Pros has been perfect.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241500305
Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP701650
Replaces worn oven door seals that allow heat to escape or show visible damage. Creates a tight barrier to maintain temperature and efficiency. Confirm fit.
Do-It-Yourself Stories from Customers like You
Both burner elements were out D B. • Lindstrom , MN • November 27, 2016
Turned the power off. Lifted the oven door up and off.to make access easier and to clean an replace gasket.Then unscrewed the element brackets. Cleaned oven. Took oven door apart to replace gasket ,you have to separate the door halves to clean window and get the gasket out. This is where you better take pictures and notes. You need a large work bench and a good #2 Phillips. Taking the elements out you will deal with gouged out screws, rust stripped threads etc. You may need to buy some self...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7201P091-60
Restores a tight seal between your oven door and frame to prevent heat loss and maintain accurate cooking temperatures. Replace if worn or damaged.
Do-It-Yourself Stories from Customers like You
Door gasket. Robert D. • Chula Vista , CA • October 03, 2020
Replaced the gasket. Very easy and only a few minutes.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR01X10065
Size: 10-32 GXTT FLP.595 S
Do-It-Yourself Stories from Customers like You
Broken shelf fixed fast! Liza B. • Concord , NC • May 06, 2019
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes.
Thanks so much!
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00414836
This is a genuine OEM replacement o-ring sourced directly from the manufacturer for use on range vent hood switches. The o-ring provides a tight seal for the switch and keeps smoke from escaping through the switch connection. If the o-ring becomes worn or damaged, the vent will not remove smoke during cooking and should be replaced. Heat and debris pulled through the vent may cause the o-ring to warp. O-rings are not designed to last forever and may need to be replaced during the life of the appliance to keep it functioning correctly.To start, disconnect the power to the vent hood and dismantle the vent in order to reach the switch. To start, disconnect the switch and locate the o-ring. Remove the old one and dispose of it. Place the new o-ring in the groove and press firmly to seal the part. Lubrication is not necessary for installing the new o-ring. Reassemble the switch and put the vent hood back in place. Connect the power and try the switch to make sure it works. This o-ring is made of heavy-duty black rubber is and sold individually. It is designed for use in range hoods manufactured by Thermidor.
Do-It-Yourself Stories from Customers like You
Broken downdraft switch James S. • Sunnyvale , CA • May 03, 2018
Found replacing the switch to be doable, but it was quite a delicate operation. This was for a Thermador range with a broken downdraft switch. It required the removal of 5 small screws which could easily be fumbled and dropped down where it would be difficult, if not impossible to retrieve. Two of the screws were facing the back, so it was a blind operation to remove and replace the screws. Required an offset screwdriver, as space was tight. So, be EXTREMELY careful to not drop the screws and...
Read more
More