Need Help?
Call
Replaces cracked, worn, or leaking internal water hose in your washer. Restores watertight water flow between drum and dispenser components.
Took the machine apart and found 2 leaks. Drum was leaking and a hose had a hole in it . Read more
Size: 90 inches long. To order hose extension use 12001585. To order siphon break use 76660.
Model# MAV7257AWW Maytag Atlantis Washing Machine. Repairs were fairly easy along with the videos appliancepartspros offers on their website. Parts also came with instructions on how to install. Other videos were available on You Tube. The only part difficult to install was Thrust bearing kit - make sure when installing to pull down on shaft so washer and e-clip will fit. Another note, you can get a pulley for your replacement motor pulley on eBay and Maytag.com. Just pay close attention to... Read more
Connects washer outer tub to drain pump, channeling water out during drain cycle. Replace if cracked, leaking, deteriorated, or damaged by pests.
Simply open the top of the washer by inserting a putty knife (watch YouTube ) and then the front panel by removing two bottom philips head screws on the front. The whole front panel comes right off. Using pliers the spring clams holding each hose, they come off and each hose is replaced. The drain one was only leaking but since it has open I changed both and even the drive belt. Whole job less than 1 hour. BTW parts arrived next day! Read more
This is a plastic air dome that traps air and transmits water pressure changes to the pressure switch, which controls the water level inside the washer tub. It connects between the tub and the pressure switch hose. Replace this part if the washer overfills, underfills, or does not fill at all, as a cracked or clogged air dome prevents accurate water level sensing.
Opened the back of machine and saw that a mouse had eaten holes in all but one of the rubber hoses. Took the top off the machine for better access. Appliance Parts Pros were the only company I could find that had all the pieces I needed in stock. Quick and easy to order online and fast shipping. Replaced the damaged hoses. Everything fits great and was easy to install. Definitely a diy project. I have even booked marked Appliance Parts Pros. Thank you Appliance parts Pros. Read more
Carries wastewater from your washer's drain pump to the standpipe or sink. Replace if cracked, kinked, clogged, or leaking to restore proper drainage.
Our washing machine door boot seal was getting moldy and causing odor problems. Cleaning tablets and bleach weren't helping so it was time to be replaced. While I had the top and front off I changed all the hoses that could be collecting soap scum and mold, all other wetted parts were removed and washed. The video on the door boot seal, and inlet valve assembly were extremely helpful in understanding how these parts are removed and reassembled. Although the door boot seal is the most visible... Read more
Channels household water to your washer's fill system. Replace if cracked, leaking, or worn to restore proper flow and prevent water damage to floors.
Replaced Read more
This is the flexible drain hose that carries used water from the washer's pump to the household drain. Replacing a cracked or kinked hose helps prevent leaks and restores proper draining performance.
Unplug from electric socket. Pulled the washer away from the wall. Have a container ready to catch any water remaining in the hose. Remove the hose from the drain in the wall and drain into container. Unsnapped the hose from the guide on the back side of the washer and removed the plastic piece around the hose on the outside of the case where the hose enters the inside of the case. Took off the front of the case, removing two screws from the bottom of the front and two from the underside of... Read more
Carries wastewater from the washer tub to your household drain. Replace if cracked, kinked, split, or leaking to restore proper drainage function.
Removed the back of the washing machine, removed the hose and installed the new one easy peasy... Read more
Extends the drain hose approximately 4 feet. You must also order a drain hose connector kit: 285835.
I ordered the drain extension kit and the hose connector kit. Read more
Black plug-in coil cartridge for modular cooktops. Replace worn, damaged, or discolored modules to restore a clean, uniform appearance across your cooktop.
I went onto AppliancePartsPros.com and the search capability was terrific. I was also very happy with the instructions that were provided about how to install the new cooktop grates. Incredibly helpful. Customer service was excellent and I was very happy with the price. Read more
Two 5-foot nylon braided hoses connect household water supply to washer inlet valves. Replace cracked, leaking, or aging hoses to prevent water damage.
Watched u tube video. Ordered replacement water inlet valve and new hoses. Dismantled washer and replaced defective valve and installed new hoses. The repair went very easily and the washer worked perfectly as a result. Read more
Contains two, six foot long braided hoses with 90 degree ends.
I had a problem with the drain pump on my Kenmore HE3 and I replaced it using a drain pump I ordered from APP. That fixed that problem but once I started running the washer I started getting a FH error code. I looked it up and found that it was a problem with the washer not filling properly. I pulled the washer out and found that one of the fill hoses had kinked when I pushed the washer back in place. There was also some writing on the hose that read "Change hose every five years". I know I had... Read more
Radiant element cartridge for modular electric cooktops. Replaces cracked, broken, or worn plug-in cooking modules. Restores smooth heating surface.
JennAir does not make this part anymore, but Whirlpool has a replacement. After checking several online sites, AppliancePartsPros had the best price and very reasonable shipping costs. We received the module in 3 days. It was an updated model which looks great; plugged it in and were ready to cook. Read more
Plastic door cover
Removed from dryer with screwdriver and opened door to access outer glass panel. Replaced with new one and reassambled. Read more
Connects washer drain hose to extension hose. Includes coupling and clamps. Replace if cracked, broken, or when extending drain hose length to reach pipe.
Size: 8 foot long. This external washer drain hose is needed when there is more distance between the washer and the drain. Note: comes with 1.5" diameter clamp but hose is 1.25" in diameter; therefore you may need to order the 1.25" diameter clamp separately: WP356138
Just took off the old vacuum break and put the new one on. It was very easy because the site had a video showing how and I watched it first. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.