Power Small Engine Ignition Coil Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10909685
Fix a dryer that won't start or has no heat with this thermal fuse. This safety component prevents overheating. Easy 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
My dryer would not start. Christopher B. • Uniontown , OH • March 11, 2022
Replaced the Thermal Fuse on the dryer.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB44X45494
The Bake Element is an OEM part for GE wall ovens and ranges. It generates the necessary heat through a series of exposed coils to bake and brown food consistently.
Symptoms of a failed bake element include:
- Inability to reach or maintain proper baking temperatures
- Burned-out coils causing uneven or sporadic heating
- Error codes relating to sensor detection of element issues
- Premature element failure can create a hazardous smell or smoke
Causes may be normal wear of the coil material over many use cycles in high heat. Without a functioning bake element, the oven cannot reliably or safely perform its baking function.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
GE range bake element exhibited hot spots Gary P. • Milo , IA • November 26, 2019
Replaced element. The new element was perfect. The shipping was perfect. Installation would have taken less than 10 minutes if the two range wires attaching to element had been 1 inch longer. Attached thin nosed vice grips to wires at spade terminals to facilitate attachment to element. The repair was simple enough but it would have been perfect if GE engineers had made wires 1 inch longer.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304533520
The Dual Element is an OEM replacement part for Frigidaire electric ranges. This component is located on the cooktop surface and features two heating coils in one unit, one measuring 6 inches in diameter and the other 9 inches. It allows for precise control of cooking temperatures, accommodating various pot and pan sizes for more efficient cooking.
Causes of a bad dual element can include prolonged use that leads to wear and tear, electrical surges that can damage the heating element, or physical damage due to impact or mishandling. Over time, these issues can result in the element failing to heat properly or not working at all.
Symptoms of a bad dual element include:
- The element not heating up or only partially heating
- Inconsistent or fluctuating temperatures
- Visible damage, such as burns or breaks in the element
- The element not responding to temperature controls
- Sparking or unusual noises when the element is in use
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Left front burner center coil did not work Jack P. • Leesburg , FL • September 12, 2016
We are very inexperienced appliance repair people. Thus check it out first to see if we can fixit...successs. First checked to be sure it wasn't the actual switch. Did this by numbering the wires and then switching the two switches b/w the right and left front dual burners. Success, the switch was fine but kinda disappointed cause this part was less expensive. Proceeded to then order the left front dual burner. Arrived in a few days, packed well. We unplugged the appliance, as it been a...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11517959
The Surface Element is an OEM part for Whirlpool ranges. It is responsible for providing the heat necessary for cooking on the stovetop. Designed to fit seamlessly into the range, this element ensures even heating and efficient energy use, allowing for precise temperature control during cooking.
Causes of a bad surface element can include normal wear and tear, electrical faults, or damage from cookware. Over time, repeated heating and cooling cycles can cause the element to degrade, while physical impacts or spills can also lead to malfunction.
Symptoms of a bad surface element include:
- Inconsistent or uneven heating
- The element not heating up at all
- Visible damage or burn marks on the element
- Sparks or unusual noises when the element is turned on
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Note: 3000/1400W - Left front element
Do-It-Yourself Stories from Customers like You
Half of the burner was dead Brian S. • Berlin , PA • November 28, 2017
Replaced the burner.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB44K5009
Broiler stopped heating or burned through? This top heating element replacement takes 10-30 minutes with basic tools. Disconnect power, remove brackets, and swap wires.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Broil element burned out Tommie S. • Greensboro , NC • June 12, 2014
Once I received the element within three days, I simply removed the other element by unclipping and unplugging lugs in rear. Placed the new one in clips and connected lugs and all was good!
Read more
More
Genuine Ge part
By: Ge
Part Number: WE4M181
Fix a dryer that won't heat, overheats, or shuts off mid-cycle. This cycling thermostat regulates drum temperature. Easy DIY repair with video guide.
This part fixes the following symptoms
-
Too hot
-
No heat or not enough heat
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
No heat Roland J. • Hawthorne , NJ • May 11, 2015
Replaced thermal stats
Read more
More
Genuine Lg part
By: Lg
Part Number: AGM30045804
Dryer not heating or overheating? The high limit thermostat shuts off heat at unsafe temperatures. Moderate difficulty repair requiring partial disassembly.
Do-It-Yourself Stories from Customers like You
Lg dryer no heat Jeffrey J. • Emerald Isle , NC • June 06, 2016
Checked and cleaned vent which was in need of cleaning, but not too bad (I do not consider this a primary causal detail, but can be a problem, so clean yours). Replaced Hi-Limit Thermostat (safety thermostat) after confirming the circuit was open with ohm meter. While I was in there, I completely cleaned the heater and ducting and internal workings of the dryer. Confirmed the heater coils were good via 20ohm, 20ohm, 40ohm readings (LG service manual has wrong readings). Two weeks later, same...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB30T10074
Burner not heating or intermittently going out? This large surface element restores consistent cooking heat. Simple 5-minute DIY replacement. Video included.
Do-It-Yourself Stories from Customers like You
Large heating element not working Shaun G. • Boulder , MT • September 04, 2015
I wasn't sure if it was the heating element surface, the receptacle or the switch. My wife does some canning so it had some good use. It turned out to be the receptacle. I purchased the element as well thinking it needed replaced anyway. All works now. All three items are/would be easy to change.
Read more
More
Genuine Lg part
By: Lg
Part Number: 5318EL3001A
Dryer won't heat or takes too long to dry? A faulty igniter often causes no heat in gas dryers. Moderate DIY repair with front panel removal required.
Do-It-Yourself Stories from Customers like You
No heat in my lg dlg5988w dryer Anthony C. • Barnegat , NJ • March 17, 2015
I first ordered a thermostat and ignitor and replaced and that did not work. I asked Appliance Parts Pros their opinion in the chat and they said it was the coils in the gas valve but you had to replace the entire valve as the coils are not sold individually. So i ordered the part and also replaced the thermistor and drum belt while i had the dryer apart anyway! And this fixed the problem! These guys are the absolute best and most helpful i have ever dealt with. This is the second time i...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11047722
Burner not heating? This radiant surface element restores heat to your glass cooktop. DIY-friendly repair, typically done in 15 minutes with our video.
Do-It-Yourself Stories from Customers like You
Replaced burner element Hon H. • Seattle , WA • November 13, 2016
Follow step by step as show on YouTube how to replacing burner elements before you work. It easy with less than 15 minutes. Save $$$ on labor cost
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316225001
Oven won't heat or bake? A faulty bake element is the most common cause. This lower heating element is an easy DIY fix—most users replace it in minutes.
This part fixes the following symptoms
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Broken element Ted C. • Gloucester , MA • May 09, 2014
Replaced with new
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP660532
Burner won't heat or heats unevenly? This 6 inch surface element restores consistent cooking temperatures. Simple plug-in replacement takes minutes.
Do-It-Yourself Stories from Customers like You
Our range needed 4 new range top elements due to wear Dale D. • Orlando , FL • December 05, 2014
Personally I have experience working with electricity and knowing if I bought the part required this would be an easy fix. I got my model number and contacted Appliance Parts Pros and placed my order for the new elements, terminal blocks, and for appearance purposes 4 new Drip Pans. Excellent service and quick shipping. I ordered my parts on Sunday and received them on Tuesday.
This was a simple repair that only required a screwdriver to remove the old terminal block from the range hood, wire...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316555800
The Dual Element is an OEM part for Frigidaire ranges. This element features two heating zones, allowing for versatile cooking options by providing both high and low heat settings on the same burner. It ensures efficient and consistent heating, making it ideal for various cooking tasks. It contains a 9-inch, 1200-watt element and a 6-inch, 1300-watt element, combining for 2500 watts at 240 volts
Causes of a bad dual element can include electrical issues, wear and tear from regular use, or physical damage such as cracks or breaks in the heating element. These issues can lead to inconsistent heating or complete failure of the element.
Symptoms of a bad dual element include:
- Burner not heating up
- Inconsistent or uneven heating
- Element not switching between high and low heat
- Visible damage to the element
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The outer ring of the front left element would heat but the inner would not Larry G. • Flintstone , GA • December 17, 2019
Replacement of the element was relatively straightforward, but there are a couple of things to be aware of before you begin. First, turn off power to the stove at the breaker box. Allow the cooktop to raise by removing the two screws that secures it on the underside of the front edge. Open the oven door to do this. Removal of the old element is simple, just remove the two screws that secure the wide mounting bracket that holds the two front elements. Carefully turn the assembly over. To...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316203200
Oven won't broil or heats unevenly? The broil element provides high heat from above for browning. DIY-friendly repair, usually takes 10 minutes to replace.
Do-It-Yourself Stories from Customers like You
Oven wouldn't heat up Danielle B. • Virginia Beach , VA • March 17, 2015
Removed the bake element and broil element. Tested them with a multi meter. They failed. Ordered new elements. Received them in 2 days. Installed new elements. Oven works great. Entire fix took 10 minutes to remove and test elements, 10 minutes to install the new elements. It was my first time working on an appliance, the instruction videos were great!
Read more
More
Genuine Ge part
By: Ge
Part Number: WB30T10132
Burner won't heat or work? This radiant surface element restores your cooktop. Easy DIY fix in about 20 minutes with basic tools. Fits many models.
Do-It-Yourself Stories from Customers like You
Element radiant both were broken because of long time using Roy R. • Raleigh , NC • December 23, 2014
I easily unplugged the oven and unscrewed the top and those burners and replaced with new one. I plugged it back and tested them. both are working perfectly now. it was very easy and i did not have to pay for technician and labor.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB30M1
Replace a non-heating or damaged 6-inch burner. Simple plug-in installation takes minutes—just unplug the old element and connect the new one.
Do-It-Yourself Stories from Customers like You
Old and scarred burners and pans Kirk W. • Indianapolis , IN • March 22, 2015
Burners were an exact match for the originals and the pans fit perfectly. Vastly improved the appearance of an old cook top and allowed us to to not have to replace it before our home goes up for sale.
Read more
More