Power Small Engine Primer Bulb Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3390291
Dryer won't heat or shuts off during cycle? High limit thermostat cuts power when overheating occurs. Quick 2-screw fix restores heating function.
Do-It-Yourself Stories from Customers like You
No heat in dryer J B. • Freeport , FL • September 19, 2014
Changed parts
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: D515873
Dryer blowing cold air or not heating? This limit thermostat monitors drum temperature and controls the heating element. Common fix for temperature issues.
Do-It-Yourself Stories from Customers like You
Cracked heater element in speed queen dryer Wendell H. • Melbourne , FL • October 09, 2019
I found a few videos on YouTube about other dryers that gave me enough information to figure out my own. I was able to pull out the heater element and replace it with a new one that arrived the day after I purchased it. I also replaced the thermal fuse and thermostat.
Read more
More
Genuine Ge part
By: Ge
Part Number: WE04X26138
The High Limit Thermostat is an OEM replacement part for GE electric dryers. Located internally near heating components, this safety device monitors drum temperatures to prevent excessive heat accumulation.
Causes of malfunction relate to water residues creating shorts, loose terminals detaching wiring due to vibrations, or a worn heat sensitive mechanism reacting slower over time.
Symptoms involve:
- Repeated thermal cut-off trips mid-cycle
- Inability to select heat settings without errors shown
- Bleach or smoke smells indicating unregulated temperatures
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
High temp sensor blew out drier would not light. Gary H. • Boonville , NY • May 16, 2020
Did continuity tests on the sensors, till I figured out what one was bad.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB36X10003
Illuminates your microwave interior for monitoring food during cooking. Replace when bulb burns out or dims. Verify fit with your model number before ordering.
Do-It-Yourself Stories from Customers like You
Light bulbs out in the hood of my spacesaver microwave Phyllis G. • Berwick , PA • October 03, 2014
Ordered two new bulbs and replaced them. The lights have two settings and only one bulb was working on the dimmest setting. The repair was easy. The new lights are so bright and arrived quickly. I will definitely order again.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281135
Dryer not heating or flame goes out after igniting? This flame sensor monitors burner temperature to regulate gas flow. Easy 15-minute DIY repair.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014
Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits.
I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have.
I looked up my dryer, decided what was probably the problem,...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB25X10019
Replace your microwave's halogen light bulb when interior lighting dims or fails. Restores visibility for monitoring cooking. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Burnt out halogen light (2) Rodolphe B. • New Bern , NC • September 20, 2014
Removed light cover. oven was above range type and light assbly is at rear bottom of unit. access and visibility of bulb sockets a bit difficult, Usen hand hell mirror to assist .
Bulb extraction and insertion a snap.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10900067
Dryer won't heat or shuts off during cycle? The thermal cut-off terminal prevents overheating by cutting power. DIY fix in 15-20 minutes with a multimeter.
Do-It-Yourself Stories from Customers like You
No heat output. The drum would turn. Lewis B. • Houston , TX • June 29, 2022
Replaced Thermal Cutoff sensor.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP303395
Dryer won't heat or overheats? High limit thermostat prevents overheating by shutting off heat at high temps. Easy DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
Would run fine but would not dry clothes something would not allow the dryer to heat Todd K. • Burr Oak , MI • March 10, 2017
For several months we could smell a slight odor of propane in the laundry room and wondered why, just didn't seem like it was enough to be overly concerned, but thought something must be wrong with the dryer, but it was still working. We just didn't know how inefficiently. Then the extra time it took to dry a load of clothes progressively seemed to get longer, but things still seemed to work fine and the clothes got dried, given enough time. Then approximately 3 weeks ago we noticed the dryer...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR2X9391
The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.
You should replace the light socket if it becomes faulty. Causes of a bad light socket can include wear and tear from regular use, electrical issues such as short circuits or power surges, and corrosion from moisture exposure.
Symptoms of a bad light socket include:
- The refrigerator light not turning on when the door is opened
- Flickering or intermittent light operation
- Visible damage or corrosion on the socket
- The light bulb not fitting securely or falling out
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Our light was flickering and didn't stop with a new bulb Dianne F. • Hampton , VA • February 14, 2015
I researched the model and watched a YouTube video on the repair. I ordered the part. Two days later it arrived and I made the repair. I'm all thumbs in home repairs, but had it done in 5 minutes. My husband was surprised. Nice that I can take care of a few simple repairs around the house.
Read more
More
Genuine Ge part
By: Ge
Part Number: 40A15
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
- Dim or no light illuminating inside refrigerator shelves
- Shadows and dark spots making it difficult to find items
- Higher utility costs from leaving the door open to see inside
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks
Read more
More
Genuine Ge part
By: Ge
Part Number: WB36X192
Clear glass lens that protects your oven light bulb. Replace if cracked, broken, or cloudy to safely view cooking progress. Confirm fit with model number.
Do-It-Yourself Stories from Customers like You
Oven would not heat and oven light wouldn't work Garett N. • Lubbock , TX • May 06, 2016
Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service...
Read more
More
Genuine Ge part
By: Ge
Part Number: WE4M448
Dryer shuts off mid-cycle or overheats? The outlet control thermistor monitors exhaust temperature. Moderately difficult repair requires drum removal.
Do-It-Yourself Stories from Customers like You
GE profile dryer shut off mid cycle Mark A. • Boynton Beach , FL • February 01, 2021
My first attempt was to replace the main board and then the thermistor, should have done this the other way around, turned out it was the thermistor, a pretty cheap part, dryer works great now. Repair requires removing the drum but overall not too difficult or time consuming.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8573713
Dryer won't heat? A failed thermal cut-off fuse cuts power when temps spike. DIYers replace this safety part in 20-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
My maytag gas dryer would start and the the tumbler rotate but the igniter would not glow and flame not start .gil P. • Enumclaw , WA • March 29, 2015
The 2 sensors that sit on top of the flame tube work together. The Thrmst F should check closed, as should the Cutoff-TML, in order for power to flow to the ignitor. If the Cutoff is open, it is usually because the Thrmst-F did not open soon enough. The Thermst-F will cycle, closed to open, and repeat, however the Cutoff-HTML is a one time switch. If it opens it will not return to closed, and subsequently the ignitor will not glow.
Some professionals say that if one of these sensors fail, both...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10191429
Light bulb socket holds and powers the bulb inside your refrigerator. Replace if lights don't work despite new bulbs or if socket is cracked or damaged.
Do-It-Yourself Stories from Customers like You
Bad refrigerator light socket Russell R. • Tulsa , OK • December 14, 2014
Dropped light panel by removing two screws with socket set. Unplugged two terminals and unclipped the light socket from the base. Then just clipped the new socket onto the base, plugged the connectors onto the terminals and remounted the base. Total job was less than 15 minutes.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPA3073101
Illuminates appliance interior. Replace when burned out or dimming. Verify wattage and base type match your model before ordering. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
Bad refrigerator light socket Russell R. • Tulsa , OK • December 14, 2014
Dropped light panel by removing two screws with socket set. Unplugged two terminals and unclipped the light socket from the base. Then just clipped the new socket onto the base, plugged the connectors onto the terminals and remounted the base. Total job was less than 15 minutes.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316032411
Oven won't heat to correct temperature or won't turn off? The thermostat regulates oven heat. DIY repair typically takes 15-60 minutes with basic tools.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Oven thermostat was broken Johnny C. • Laurel , MS • February 08, 2016
Removed old thermostat and pulled old thermocouple fron oven. ran new thermocouple to oven and put in clip, tistalled new thermostat using 2 phillips head screws, done.
Read more
More