Control Panel Lcd Parts

• Won't start

I am a 76 year old woman and hesitated to tackle the job. But my son sent me a Utube video "how to replace the board," and I was able to replace it, surprisingly, quite easily. I could have done it in a shorter period of time, if I had not been challenged with these arthritic hands and fingers. The refrigerator is now holding the temperatures quite nicely. Joan Read more

I found a YouTube video on how to diagnose the problem and a recommendation to buy the part with you guys. Read more

I called a repairman and he wanted $230 to put in a new timer so I went online to Appliance Parts Pros.com and found the part and watched video on how to replace timer. The timer cost $89 and I received it in 2 days. It took about 3 minutes to replace and my dryer works great! Read more

New timer Read more

• Won't start
• Too warm

I unplugged the freezer, removed the old control board by prying it out with my hands and then pressed in the new control board with my hands. The freezer functioned normally after it was plugged into the wall outlet again. Someone with large hands or short fingernails might benefit from the use of a straight blade screwdriver while prying out the broken control board. Read more

Installed a new user interface assembly Read more

I ordered a new kit and replaced it. It was easy except the video on the website did not include how to get off the front sticker. However, I did find another video to help Read more

• Will not dispense detergent

Replaced control board. This did the trick! The dishwasher works great again. Read more

Started with replacing hinges. Had to glue the door hinge to refrigerator and secured with two small screws. This refrigerator is in a business with about 50 employees. Suspect minion was not working for some time causing the hinges to get broken. . Read more

Ignore the blogs that say the code is either for the door switch or the main control board. Just buy both of them because it is cheaper than a new dishwasher. Easy as Read more

Replaced the timer - This should have been a VERY easy repair however, there is a clip (holding the timer to panel) on the bottom of timer than must be removed with a pair of pliers. There is absolutely NO room to access this clip so I had to take apart much of the dryer to gain access. What should have been a 15 minute repair turned into a frustrating hour. Read more

Reverse engineered. Read more

Ordered front panel and panel control. Also ordered name plate (did not need) front panel already has it. My husband and I had it switched out in approx 10 minutes. Took longer to gather proper tools than it did to do the repair. Looks awesome and original! Read more

Ordered two boards which were indicated as the possible problem. I took detailed pictures of each board before removing to assure I was reconnecting all the connections correctly. I used a long set of needle nose pliers to remove each connector. The tricky part was trying to figure out how to remove the boards. So far when I experience a power loss the frigid has successfully restarted. Fingers crossed!! Read more

Looked at new part and realized there were only 2 screws that held the flap onto the door. Removed 2 caps off of screws with small knife and saved them. Removed 2 screws and the flap fell off into my hands. Disconnected wire harness. Connected wire harness for new flap and carefully pushed harness back into recess in door. Put screws back with caps. Closed the door to test and another wonderful job completed by homeowner! Read more