Need Help?
Call
Screens debris from entering the pump and wash arms. Replace if damaged, shredded, or causing poor drainage. Verify fit with your model number.
Replaced broken filter in main pump Read more
Filters food particles and debris from the circulation pump. Replace if damaged, shredded, or causing grinding noises to prevent pump damage and leaks.
Dishwasher needed to be disconnected from power and water supplies, removed from the cabinet and placed on it's back to gain free access to the underside of the unit. The motor-pump unit removed ( just three screws and two wire connections ). Once the motor unit is removed, the filter-pump part 'rests' on the end of this unit and just lifts off. The new part is put in place and the motor is re-attached, minding to make the metal support arm goes back inside the rubberized carrying slot and... Read more
Holds water filter in place for proper filtration to ice maker and dispenser. Replace if cracked, leaking, or damaged. Confirm fit with your model number.
I OBSERVED UPON OPENING THE COVER THAT FILTER ASSEMBLY COVER HAD CRACKED. ORDERED NEW COVER AND REPLACED IT. LEAK HAS STOPPED. Read more
Grease filter for range hoods and over-the-range microwaves. Dimensions: 6-7/8" x 15-9/16" x 3/32" (6.875 x 15.5625 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.
After many years of excellent service the burner I use most often on the top of my JenAir range rusted through. After trying to remove the burner, which was firmly rusted into place, I decided to replace the cooktop pan, both burners and igniters. It was an easy repair to swap out the new parts for the old, and the only tool necessary was a #2 phillips screw driver. The only difficulty was that although the cooktop pan appears symmetrical, the screw hole pattern on each side is different. I did... Read more
The Lint Filter is an OEM component for Frigidaire dryers. As an important safety component, the lint filter screens out lint and other debris from the airflow before it exits the dryer. Trapping lint inside the filter helps reduce fire hazards and maintains peak airflow for more efficient drying performance. Symptoms of a bad lint filter include:
Causes of a lint filter issue include failure to clean the filter after each use, resulting in a blockage over time. Natural wear and tear or accidental damage can also render the filter unusable. This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Replaced filter. Read more
Purifies water before reaching your dispenser and ice maker. Replace every 6 months for clean, safe drinking water. Verify fit with your model number.
Remove and replace water filter also run cold water sprout for 3 minutes. Reset water filter pad. Read more
Dryer lint screen captures lint and debris to protect the blower system. Replace when torn, damaged, or handle breaks. Confirm fit by model number.
Ordered replacement lint screen. When it arrived, I took out the old one and put the new one in the dryer. I am extremely happy with the new lint screen. I tried to find one on Sears website but it was unavailable; it was wonderful to find your website and to find what I needed. The customer service representative was so helpful and pleasant! Whenever I need a replacement part for my 30+ year old washer or dryer, I will order it from you. Read more
Replaces the water filter when filtration isn't needed, maintaining water flow to your ice maker and dispenser. Confirm fit with your model number.
Replaced with new housing Read more
Refrigerator air filter scrubs interior air to keep food fresher and reduce odors. Replace every 3 months for optimal performance. Verify fit with your model number before ordering.
Dryer lint filter kit with screen and housing. Replace when clogged, torn, or damaged to maintain airflow and prevent fire hazards. Verify fit by model.
Houses the replaceable water filter cartridge for your refrigerator's ice maker and water dispenser. Replace if filters won't seat properly, water leaks from housing, or flow is restricted. Verify fit by model number.
I replaced the water filter housing assembly. It was simple to do since your site provided the how-to video. The only snag I ran into was that I had a hard time re-positioning the foam brace under the filter. The space is tight. Would have been easier if I had smaller hands. The whole process took about 10 minutes. Would have been faster but that foam piece took a while. Side note, my fridge didn't have the retaining clips shown in your video. Now my water/ice dispenser works as it... Read more
Connects water filter to supply line in your refrigerator. Replace if you have leaks at filter connection, weak water flow, or worn inlet pins. Confirm fit with your model number.
If you have a problem of water pressure when you press for water at the dispenser your problem migth be your filter head assembly. Thanks to appliAncepartspros for their assistance Read more
Traps small food particles at the bottom of your dishwasher tub to prevent clogs and maintain cleaning performance. Replace if torn or damaged.
Replaced the filter Read more
Traps grease and particles from cooking to maintain efficient ventilation. Replace every 6-12 months depending on usage. Confirm fit with your model number.
Ordered all the parts needed, replaced them and the Jenn Air worked just fine. Read more
Houses the water filter and connects to the water supply line. Replace if water leaks, sprays during filter changes, or dispenser flow decreases. Verify model fit.
After changing water filter, flow came to a stop. Would chatter without any water. Confirmed I had flow from the wall supply to the fridge as I broke the water line at the union and let run into a bucket. Then I removed the water filter housing and tube assembly after reconnecting supply. Now the water was only circulating from the wall to the filter housing to the bucket. No flow and chatter was present. I did this to rule out a frozen reservoir. Really simple fix. Was able to remove... Read more
Grease and odor filter for range hoods and over-the-range microwaves. Dimensions: 8-15/16" x 10-1/2" x 3/32" (8.9375 x 10.5 x 0.09375). Rectangle shape. Captures grease and removes cooking odors from cooking air. Replace when clogged, discolored, or every 6-12 months.
I checked a couple stores for a new filter but no one had the exact size I needed, so I went online and ordered one from Appliance Parts Pros. I ordered it late one night and by the morning of two days later, I received a brand new one. I popped in place and it looks great. I was really impressed with the fast service. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.