Run Vent User Control Display Board Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10803367
The Touchpad Control Panel is an OEM part for KitchenAid dishwashers. It allows the user to select different wash cycles, adjust settings, and activate specific features of your dishwasher. It measures approximately 24” in length and is black in color.
Causes of a faulty touchpad control panel can include wear and tear over time, accidental spills or damage, or electrical component failure. These factors can result in unresponsive buttons, erratic behavior, or the inability to select or adjust settings properly.
Symptoms of a bad touchpad control panel may include:
- Unresponsive or non-functioning buttons
- Erratic or inconsistent response to touch inputs
- Incorrect or missing display information
- No LED display
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dishwasher touchpad stopped working Guillermo S. • Orlando , FL • May 15, 2021
I found a YouTube video on how to diagnose the problem and a recommendation to buy the part with you guys.
Read more
More
$180.71
- Compare At:
-
$216.85
- You Save:
-
$36.14
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10185972
Dryer won't start or only works on timed dry? A faulty timer is often the cause. This control manages cycle duration and start functions.
Do-It-Yourself Stories from Customers like You
My dryer would turn on but did not heat Ileana M. • Oklahoma City , OK • October 03, 2014
I called a repairman and he wanted $230 to put in a new timer so I went online to Appliance Parts Pros.com and found the part and watched video on how to replace timer. The timer cost $89 and I received it in 2 days. It took about 3 minutes to replace and my dryer works great!
Read more
More
$86.95
- Compare At:
-
$104.12
- You Save:
-
$17.17
Genuine Lg part
By: Lg
Part Number: 5214FR4006G
Drain hose carries used water from washer to household drain. Replace if cracked, leaking, deteriorated, or damaged to prevent water overflow issues.
Do-It-Yourself Stories from Customers like You
There was a hole in the tube to pump hose Gary M. • Watkinsville , GA • June 28, 2016
I replaced the Tube to pump hose which was very easy. I just tilted the washer on it side and replaced the Hose.
Read more
More
$14.95
- Compare At:
-
$17.94
- You Save:
-
$2.99
Genuine Ge part
By: Ge
Part Number: WR55X10956
The Main Control Board is an OEM replacement part for GE refrigerators. This critical component manages and coordinates all of the refrigerator's operations, including temperature regulation, defrost cycles, and the functioning of the compressor and fans. It ensures that the refrigerator maintains the desired temperatures and operates efficiently.
Over time, the main control board can fail due to electrical surges, wear and tear on its electronic components, or exposure to moisture. Manufacturing defects or issues within the refrigerator’s electrical system can also lead to malfunctions, impacting the overall performance of the appliance.
Symptoms of a bad main control board include:
- The refrigerator not cooling or freezing properly
- Unusual or erratic temperature fluctuations
- The refrigerator not responding to control settings
- The compressor or fans not running
- Error codes or lights flashing on the display panel
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Our refrigerator would not hold the correct/ default temperatures for the freezer and the refrigerator so we opted to replace the mother board Joan S. • Palm Harbor , FL • November 03, 2014
I am a 76 year old woman and hesitated to tackle the job. But my son sent me a Utube video "how to replace the board," and I was able to replace it, surprisingly, quite easily. I could have done it in a shorter period of time, if I had not been challenged with these arthritic hands and fingers.
The refrigerator is now holding the temperatures quite nicely.
Joan
Read more
More
$211.95
- Compare At:
-
$254.34
- You Save:
-
$42.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 297370600
This electronic control board includes the user-facing touch pad display panel and the circuit board that manages freezer temperature settings and functions. It mounts on the exterior of the freezer compartment and allows you to adjust temperature and other settings. Replace this board if the display is blank, unresponsive, shows error codes, or if the freezer is not maintaining the correct temperature despite other components working properly.
Do-It-Yourself Stories from Customers like You
Freezer did not function and the control board displayed nonsense characters Kemper B. • Rockwood , TN • November 21, 2014
I unplugged the freezer, removed the old control board by prying it out with my hands and then pressed in the new control board with my hands. The freezer functioned normally after it was plugged into the wall outlet again. Someone with large hands or short fingernails might benefit from the use of a straight blade screwdriver while prying out the broken control board.
Read more
More
$118.95
- Compare At:
-
$142.74
- You Save:
-
$23.79
Genuine Ge part
By: Ge
Part Number: WE04X25586
Dryer won't start or timer knob won't advance? This timer controls cycle duration and dryer operation. Moderate DIY repair, swap wires one at a time.
Do-It-Yourself Stories from Customers like You
Timer was froze up won’t turn anymore Kevin S. • Scottsboro , AL • March 15, 2025
Ordered new timer and knob unplugged it , switched wires over to the new one changed it out put back together and plugged it back up and was good as new .
Read more
More
$79.29
- Compare At:
-
$94.36
- You Save:
-
$15.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10467168
This rubber hose connects the wash tub to the drain pump, carrying water from the tub to the pump during the drain and spin cycles. It is secured with clamps at each end. Replace this hose if your washer is leaking water underneath, not draining properly, or if the hose shows signs of cracking, softening, or blockage.
Do-It-Yourself Stories from Customers like You
Drain pump and tub to drain pump replacement (error code sud washer not draining) Monty M. • Tooele , UT • August 08, 2016
Repairing the problem was the easy part. Diagnosing the problem took a little more time. To diagnose the problem, it took longer because I first cleaned the Drain Pump trap from all the material it collected. Socks, hair pins, and other materials that were not cleaned from pants pockets. It then still did not drain. Repeated the process after finding more materials and a toy that punctured the hose between the tub and the drain pump. Running the drain and spin cycle takes about 11...
Read more
More
$37.95
- Compare At:
-
$45.16
- You Save:
-
$7.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304527930
Fix blinking display, non-responsive controls, or partial numbers on your refrigerator. This user interface board restores control panel function. DIY install.
Do-It-Yourself Stories from Customers like You
LED lights on user interface assembly not working on lower part of the numbers Scotty G. • Austin , TX • July 22, 2019
Installed a new user interface assembly
Read more
More
$203.95
- Compare At:
-
$242.70
- You Save:
-
$38.75
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10084141
Fix a dishwasher that won't start, stops mid-cycle, or has a blinking light panel. This control board regulates all wash cycles and functions.
This part fixes the following symptoms
-
Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You
Kitchenaid dishwaser would not complete cycle Christopher K. • Grantham , NH • June 22, 2015
Replaced control board. This did the trick! The dishwasher works great again.
Read more
More
$192.59
- Compare At:
-
$203.22
- You Save:
-
$10.63
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304495520
Fix F10, F11, or F12 error codes, oven temperature issues, or non-heating elements with this range control board. DIY repair in about 30 minutes.
Do-It-Yourself Stories from Customers like You
F11 error Marge E. • St Louis , MO • May 01, 2015
I ordered a new kit and replaced it. It was easy except the video on the website did not include how to get off the front sticker. However, I did find another video to help
Read more
More
$331.95
- Compare At:
-
$395.02
- You Save:
-
$63.07
Genuine Ge part
By: Ge
Part Number: WD21X31900C
Fix a dishwasher that won't start or shows door open errors. This main control board manages cycles and functions. Moderate difficulty repair.
Do-It-Yourself Stories from Customers like You
815 Terrie M. • Overland Park , KS • February 27, 2021
Ignore the blogs that say the code is either for the door switch or the main control board. Just buy both of them because it is cheaper than a new dishwasher. Easy as
Read more
More
$187.28
- Compare At:
-
$206.01
- You Save:
-
$18.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8317926
Connects the vacuum break to the outer tub in your washer. Replace if cracked, split, or leaking to prevent water from bypassing the tub during fills.
Do-It-Yourself Stories from Customers like You
Hose broke sending water that was supposed to goto the tub directly onto the floor. Trent M. • Tinley Park , IL • March 14, 2014
Unscrewed console and tilted it back. Then removed clips for machine skin. Rocked it back slightly to access the tub side hose. Removed water inlet valve assembly and removed from the valve.
Fished out the old hose. Fished in new hose. Reattched it then reassembled unit. Spent 15 min looking for clip I lost on NASTY FLOOR AAAAAARGH! When done I tested it then found the cold inlet hose screen was clogged. Went to store and replaced hoses and inlet screens too. Glanced over at other washer and...
Read more
More
$24.68
- Compare At:
-
$29.37
- You Save:
-
$4.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3357328
Replaces the vacuum break inlet hose connecting the water inlet to your washer tub. Needed when original hose is cracked, burst, leaking, or damaged.
Do-It-Yourself Stories from Customers like You
My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available....
Read more
More
$19.31
- Compare At:
-
$22.98
- You Save:
-
$3.67
Genuine Whirlpool part
By: Whirlpool
Part Number: W10857612
Dryer won't shut off or timer won't advance? This control timer manages cycle duration and prevents continuous running. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Timer would not advance past the cool down cycle as a result dryer would not shut off unless you manually advanced the time dial or opened the dryer door David F. • Carmel , IN • October 14, 2018
Replaced the timer - This should have been a VERY easy repair however, there is a clip (holding the timer to panel) on the bottom of timer than must be removed with a pair of pliers. There is absolutely NO room to access this clip so I had to take apart much of the dryer to gain access. What should have been a 15 minute repair turned into a frustrating hour.
Read more
More
$111.54
- Compare At:
-
$151.75
- You Save:
-
$40.21
Genuine Whirlpool part
By: Whirlpool
Part Number: W11305293
Fix a dishwasher that won't start, shows no lights, or runs cycles too long. Electronic control board manages all dishwasher functions. Moderate difficulty repair.
More
$164.78
- Compare At:
-
$196.09
- You Save:
-
$31.31
Genuine Ge part
By: Ge
Part Number: WH41X365
Connects the pressure switch to the tub in top-load washers. Replace if cracked, punctured, or brittle to restore proper water level monitoring.
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Water level shutoff switch did didn't work allowing the washer tub to overfill William H. • Papillion , NE • March 22, 2015
I replaced the water level switch and hose. After removing the hose, I found that it was clogged, and did not allow the water level to be sensed by the switch. A test after the replacement of the parts was successful. While filling the tub, the water shut off at the small, medium, and large levels as indicated by the switch.
Read more
More
$17.95
- Compare At:
-
$21.54
- You Save:
-
$3.59