Need Help?
Call
Oven won't heat or bakes unevenly? A failed bake element is likely the cause. This lower heating element replacement typically takes 30 minutes or less.
Turned off the power to the oven, removed the old element and installed a new element that I purchased from Appliance Pros.com. The part was delivered in a timely manner and was packed securely for shipping. Thanks!!!!!! Read more
If your oven won't heat during baking but broil works, the bake element has likely failed. DIY-friendly repair—remove oven racks, unscrew element, swap.
Ordered the replacement Bake Element and installed it. Read more
Replace a non-heating or weak 8-inch surface burner with this radiant element. Requires lifting the cooktop and Torx screwdriver. Moderate DIY repair.
I ordered the 8 inch Haliant Element from Appliance Parts Pro with overnight shipping (I needed to have it working for Easter weekend!) and it arrived when promised and in perfect condition! To replace, you need a couple of boards longer than the stove is wide to hold the stove above the counter. You will also need a T15 Torx head on a handle or socket wrench. It also helps to have some pliers, and a second person to slip the boards under and out from the stove when you lift it. First, shut... Read more
Fix a warm fridge or freezer ice buildup. This defrost heater melts frost on evaporator coils to restore cooling. Moderate DIY repair, 1-2 hours.
Replaced defrost heater, temperature and defrost limiter thermostat. After taking the cover off the air chiller I found the coils frozen solid and defrosted it with a hair dryer. Once defrosted I remover the heater coil to test it it was fine, then I could see the defrost limiter was broken and as I put the unit back together I broke the heater tube (it is glass) so I ordered all the parts that might be defective and replaced them for less than the charge of having some one come to check it out. Read more
Fix an oven that won't broil or brown food properly. This broil element restores top heat for searing. Easy DIY repair, typically done in 30 minutes.
I ordered the bake unit from appliancepartspro.com; while ordering, I decided to go ahead and replace the oven broiler burner as well. Appliancepartspros.com's videos helped me replace the parts with ease. It took barely 30 minutes to install both. Plus, very fast shipping and correct parts. Now, I do not have to worry about baking during Thanksgiving! Cheers, Sean Read more
Burner not heating? This 5.5" radiant element fits beneath glass cooktops. Common fix for non-working burners. Moderate DIY, 20-30 minutes to replace.
Raised ceramic top, removed old element, installed the new one. Read more
Oven won't heat or bakes unevenly? A faulty bake element is often the cause. This bottom heating element restores even baking. DIY install in 5-10 minutes.
Repair video was very helpful. Followed the instructions and the element was replaced easily and correctly. Read more
Oven not heating or baking unevenly? The bake element provides bottom heat for baking. Easy DIY fix—just 2 screws and wire connectors. Takes 15 minutes.
1) ordered new boiler element after searching for oven/stove model # online 2) unplugged oven 3) removed 2 screws holding element in place 4) pulled out the element and a length of wires attached to the element (enough that the wires wouldn't pull back into the hole after detached) 5) used needle-nosed pliers to detach wire clamps, noting which wire attached to which side of the old element 6) removed old element and its pieces from the bottom of oven 7) attached wires to new element,... Read more
Oven won't heat or bakes unevenly? The bake element likely failed. Simple DIY fix—just remove two screws, disconnect wires, and install new element.
I purchased a new elelmnt and fixed it myself!! Read more
The Bake Element is an OEM component for Frigidaire wall ovens. It is an integrated heating coil that generates heat through electric resistance when powered. Located near the bottom of the oven cavity, the bake element facilitates heating for various cooking functions like baking, roasting, or warming. This element measures approximately 13 x 11 inches. Symptoms of a bad bake element include:
Causes can be cracks in ceramic sheathing allowing arcing, or mineral deposits coating coils over extended use impeding heat transfer.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
First, I took an ohm reading across the elements and determined the bad one, which was failed, open circuit. (Zero continuity) I then replaced the lower heating element of the upper oven. Although the design of the oven and element make it appear that it will just drop down and slide out the front, this is not quite the case. There is not enough clearance for it to drop all the way down. You have to pull the entire double-oven unit out of the wall, separate the upper and lower halves a few... Read more
Ice buildup in freezer or warm fridge? This defrost heater melts frost from evaporator coils during the defrost cycle. Moderate DIY repair with video guide.
Tried to put refrigerator in defrost mode and defrost would not initiate. Checked the bi-metal and heater, both tested good. Replaced the ADC board and refrigerator went in to defrost. problem solved. Read more
Burner not heating or 'Hot Surface' light stays on? This electric cooktop surface element is likely the fix. DIY-friendly, most installs take 15 minutes.
Turned off power supply. Removed two screws (near the oven door) holding the ceramic top. Slid the top forward, disengaged the two power supply cables, and removed one ground wire. Removed range top, and put on a flat surface. Unclamped two power supply wires, one ground wire and one thermocouple wire from the element. Unscrewed the bracket from the element, and remove the element from the range top. Remove the two clamps from the old element, and put them on the new element at the same... Read more
Fix frost buildup on evaporator coils causing warm temps or freezer icing. This defrost heater melts accumulated ice. DIY repair in 30-40 minutes.
REPLACED DEFROSTER, CONDENSER FAN MOTOR AND DEFROST THERMOSTAT. Read more
Oven not heating or holding temperature? Replace your range's bake element. Takes about 20 minutes with basic tools. Requires rear panel removal.
Unplugged range, removed back panel. Loosened plug block from range, unhooked wires from existing element, then sliced through insulation between element ends with sharp knife. Removed screws holding element ends then removed element. Inserted new element, screwed it in place, connected wires and replaced plug block. Vacuumed up fiberglass insulation dust and replaced back panel. Replaced plug then tested. Read more
Range not browning or crisping food? A failing broil element often shows scaling or charring on coils. Easy DIY fix from inside oven—no back panel removal.
Replaced both bake and broil elements. Read more
This is an 8-inch coil-style surface burner element designed for electric ranges equipped with temperature-sensing technology. It plugs directly into the burner receptacle on the cooktop and provides heat for larger pots and pans. Replace this element if the burner no longer heats evenly, fails to turn on, or has visible damage such as pitting, warping, or broken coils.
Ordered and replaced it with a new 8" Surface Burner from you. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.