Power Small Engine Spark Plug Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387043
The Dispenser Cover Kit is an OEM replacement part for Whirlpool dishwashers. It includes both the outer lid that protects the detergent and rinse aid compartments as well as the latch mechanism securing it closed. This dishwasher dispenser kit included the cover, lid hinge pin, spring, snap, and latch.
Causes of a bad dispenser cover can include wear and tear from frequent use, physical damage from accidental impact, and discoloration or warping due to exposure to sunlight or heat.
Symptoms of a bad dispenser cover kit include:
- Cracks or breaks in the cover
- Discoloration or yellowing of the plastic
- The cover not fitting securely or becoming loose
- Difficulty in using the dispenser controls due to a damaged cover
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dispenser cover would no longer open automatically Rhonda D. • Buda , TX • March 25, 2014
We ordered the dispenser cover kit. the problem was with the spring. followed your "how to" video and it was a quick and easy fix!
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Ge part
By: Ge
Part Number: WE04X26216
Dryer not heating properly or overheating? This thermostat regulates temperature to keep your dryer running safely. Simple DIY fix in under an hour.
Do-It-Yourself Stories from Customers like You
No heat no code Wayne R. • Cabot , PA • July 21, 2026
This was a friends dryer. They'd been quoted a $200 call out fee and after taking with them on the phone were also told they could have the dryer taken away for $150. I told my friends that inwould fix it. I used a multimeter to check the thermostats, heaterbelement and funrion dial. I found 2 bad thermostats. I orderd one part from you, another from elsewhere as you did not have stock. I replaced the dead parts with new and the dryer heats again. It cost me $65 total in parts and shipping to...
Read more
More
$36.95
- Compare At:
-
$43.97
- You Save:
-
$7.02
Genuine Ge part
By: Ge
Part Number: WD30X10020
Roller bearing cage installs in the dishwasher rack track to support smooth gliding. Replace if cracked, broken, or causing the rack to stick or slide out.
Do-It-Yourself Stories from Customers like You
Instructions to replace wd12x10304 (ap4484666) roller bearings Richard L. • Webster , NY • February 18, 2016
I did not see the old ones fall out, so I was not sure the exact product placement within the rail, which was frustrating, to say the least.
For the next person's benefit....these slide into the MIDDLE of the rail that is attached to both sides of the dishwasher. Not the front, not the back, but the middle!
Steps to fix:
1) Order 2 of these Roller Bearing Cage.
2) Order 4 of WD12X10304 (AP4484666) end caps!! Unless you have brand new ones already, you will need them for sure and they are...
Read more
More
$34.95
- Compare At:
-
$41.24
- You Save:
-
$6.29
Genuine Ge part
By: Ge
Part Number: WE04X25200
Dryer not heating or drying clothes properly? This cycling thermostat regulates temperature during the drying cycle. Moderate DIY repair for most models.
Do-It-Yourself Stories from Customers like You
Failing to dry clothes David K. • Mohnton , PA • September 19, 2022
Removed exterior panels, cleaned all venting, replaced outlet thermistor and thermostat. Pressure washed all removable parts. Reassembled. Now working as it should.
Read more
More
$18.95
- Compare At:
-
$22.74
- You Save:
-
$3.79
Genuine Frigidaire part
By: Frigidaire
Part Number: A00130341
Fix a soap door that won't open or stay closed. This detergent dispenser releases soap at the right time during wash cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Dish soap door wouldn't stay closed Brad D. • Orrville , OH • April 19, 2020
Started with a YouTube video, then this site. Between the two, fixed in about a half an hour.
Read more
More
$77.95
- Compare At:
-
$91.98
- You Save:
-
$14.03
Genuine Whirlpool part
By: Whirlpool
Part Number: WP306604
Dryer won't heat or start? This thermal fuse cuts power when temperatures get too high. Test with a multimeter for continuity. Easy DIY repair.
This part fixes the following symptoms
-
Won't start
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Maytag gas dryer was not heating Christopher P. • Los Angeles , CA • October 04, 2014
Did some dryer repair research (dryer not heating) on the internet. Bought an ohm meter, opened up the dryer and tested the cut-off-T, high limit thermostat, dryer igniter, flame sensor, cycling thermostat for continuity. The igniter was bad, the other parts tested ok. Went online to AppliancePartsPros.com searched for a new igniter for my specific dryer model, found the right replacement igniter and watched the video on how to replace the igniter. Because my dryer is old (15+ years) and I...
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507354
Soap dispenser door won't open or latch is broken? This detergent dispenser assembly fixes dispensing failures. DIY repair takes 10-15 minutes.
Do-It-Yourself Stories from Customers like You
Rinse agent leaking from the dispenser Hal C. • Clarksville , TN • September 13, 2016
This was a pretty easy fix. Removed the screws around the perimeter of the inside cover of the door and pressed the outer door cover upward to release it from slots retaining it. There are four wires to remove (2 for the detergent door release and 2 for the rinse agent release). Removed the 6 screws retaining the dispenser assembly and inserted the new one. Reassembly is simply in reverse order.
Problem solved for less than the cost of a service technician's call!
Read more
More
$61.56
- Compare At:
-
$73.26
- You Save:
-
$11.70
Genuine Ge part
By: Ge
Part Number: WE04X20685
The Thermistor is an OEM replacement part for GE dryers. This temperature-sensing device monitors air exhaust temperatures and communicates real-time readings to the control board. Precise thermistor functioning ensures the heating elements and drum engage safely and appropriately.
Symptoms of a faulty thermistor include:
- Slow or inconsistent drying times
- Excessive heat inside the dryer chamber
- Overheating indicator lights illuminated
- Potential shut-offs due to high-limit temperature triggers
Causes often relate to moisture exposure from normal operation degrading electronic performance over time. Physical stress or impact could potentially damage thin connecting wires.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dryers.
Do-It-Yourself Stories from Customers like You
Gas dryer was not heating Charles M. • Huron , OH • September 01, 2016
Checked vent first to see if there was a blockage.
Removed top, front and drum of dryer.
Replaced all sensors including flame detection and gas valve coils.
Re-assembled and tested.
Dryer was now heating
Read more
More
$18.76
- Compare At:
-
$22.51
- You Save:
-
$3.75
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3398128
This cycling thermostat monitors the air temperature inside the dryer drum and signals the heating element to turn on and off to maintain the selected drying temperature. It is a small, disc-shaped component typically mounted on the blower housing or exhaust duct. Replace this thermostat if your dryer is not heating, overheating, running too cool, or shutting off before clothes are fully dry.
Do-It-Yourself Stories from Customers like You
Thermostat and thermofuse Britt A. • Concord , NC • February 16, 2015
Out with the old. In with the new. No problem. Dryers are simple and usually can be fixed quickly. appliance pros makes it easier with their tutorial videos and fast shipping!
Read more
More
$57.39
- Compare At:
-
$68.87
- You Save:
-
$11.48
Genuine Lg part
By: Lg
Part Number: 6501EL3001A
The Igniter Sensor is an OEM part for LG dryers. This sensor plays a critical role in the ignition process, ensuring that the gas ignites properly to produce the heat necessary for drying clothes efficiently. It helps monitor and regulate the ignition temperature.
Over time, the igniter sensor can become faulty due to regular use, exposure to high temperatures, or electrical issues. These factors can lead to a malfunction, resulting in the dryer not heating properly or failing to start.
Symptoms of a bad igniter sensor include:
- Dryer not heating up
- Long drying times
- Dryer not starting
- Unusual smells or noises during operation
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Dryer started gas line good won't heat early model no codes Timothy M. • Roaring Spring , PA • November 25, 2016
Used video and took apart dru, this was extremely helpful. I bypassed the belt and door switch. Tested gas valves (gas disconnected) with multimeter. Found that the igniter worked the first gas valve, but the second gas valve would not open and the igniter would stay on. Found a flow chart online that shows the flame detect turns on causing the gas to turn on and shuts off the igniter. I replaced it and tested again. Igniter turns on, shuts off, then power to the second gas valve turns...
Read more
More
$138.95
- Compare At:
-
$163.96
- You Save:
-
$25.01
Genuine Whirlpool part
By: Whirlpool
Part Number: 279366
The Moisture Sensor is an OEM part for Whirlpool dryers. This part detects the moisture level in the clothing during the drying cycle, allowing the dryer to adjust the drying time accordingly.
Causes of a bad moisture sensor can include regular wear and tear, buildup of lint or residue, or physical damage.
Symptoms of a bad moisture sensor include:
- Clothes taking longer to dry or coming out still damp
- The dryer not stopping when clothes are dry
- The dryer shutting off prematurely
- Inconsistent drying results
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dampness sensor was broken George L. • Marquette , MI • March 24, 2014
Viewed the video before I purchased the part. Received the part and put it in. Everything went as planned.
Read more
More
$74.95
- Compare At:
-
$89.19
- You Save:
-
$14.24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP35001193
Dryer runs but won't heat? A blown thermal fuse is the most common cause. This overheating safety device protects your dryer's heating system. DIY repair.
Do-It-Yourself Stories from Customers like You
No heat Tony M. • Chester , NJ • February 01, 2015
Removed the heater of course and installed the part. Very easy to do no need to remove the drum, just top cover, control panel, and front door assembly. Remove the one screw holding heater, remove blue wire, turn heater CCW to the 8 o'clock poisiton. Install in the reverse order. This is the secound one in a month if it fails again i'll just bypass it and install a 25 AMP fuse.
Read more
More
$42.95
- Compare At:
-
$51.11
- You Save:
-
$8.16
Genuine Ge part
By: Ge
Part Number: WE04X25199
The Thermostat is an OEM component specifically designed for GE laundry machines. It is a heat-sensing component that monitors and regulates air temperatures inside the dryer drum. Precise thermostat functioning ensures proper drying temperatures are reached and maintained for optimal performance.
Symptoms of a bad thermostat include:
- The dryer failing to heat or only heating intermittently
- Unexpected temperature display readings or error codes
- Inconsistent moisture removal or garments not fully drying
Causes include sensor degradation, electrical faults, or improper ventilation reducing its ability to accurately measure temperatures.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
No heat in gas dryer Peter S. • Glenview , IL • April 23, 2024
Realizing that there could be multiple reasons for a gas dryer failing to heat, I decided to test everything I could. The very detailed and product specific video showed me how to disassemble the dryer. The thermostat, cycling thermostat, high limit, flame detector, igniter, gas valve coils and timer all showed correct continuity or resistance. I thought it might be the gas valve itself, but felt that wasn't likely so I decided to go ahead and replace the thermostats and limit switch since...
Read more
More
$18.95
- Compare At:
-
$22.36
- You Save:
-
$3.41
Genuine Ge part
By: Ge
Part Number: WB2K15
The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.
Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.
Symptoms of a bad Bumper include:
- Excessive noise
- Difficulty in sliding the drawer
- Misalignment
- Wear, and increased friction
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Bumbers on stove top grates failed due to time of use Howard V. • Baton Rouge , LA • February 14, 2016
Looked for the parts at this site and ordered those need plus spares
Read more
More
$12.44
- Compare At:
-
$14.93
- You Save:
-
$2.49
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY304475
The Cycling Thermostat is an OEM part for Whirlpool dryers. This thermostat regulates the temperature inside the dryer by cycling the heating element on and off to maintain a consistent temperature. .
Causes of a bad cycling thermostat can include wear and tear over time, electrical faults, or damage due to overheating.
Symptoms of a bad Cycling Thermostat include:
- Clothes taking too long to dry
- The dryer not heating at all
- The dryer overheating
- Erratic or inconsistent drying temperatures
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
It was taking unusually long to dry a typical load Robert L. • Williamsburg , VA • November 15, 2014
I removed the front panel and observed the heating element while running the dryer. It was cycling off every minute or so and staying off for several minutes. Even though it was likely the high temp cycling thermostat I replaced both the 14, and 15 cycling thermostats which I think are the original factory units. That makes them nearly 35 years old. Problem fixed.
Read more
More
$61.56
- Compare At:
-
$72.64
- You Save:
-
$11.08
Genuine Ge part
By: Ge
Part Number: WE04X29714
Dryer not drying evenly or shutting off too soon? A faulty outlet thermistor causes inaccurate heat control. This sensor monitors exhaust temperature.
More
$18.95
- Compare At:
-
$22.36
- You Save:
-
$3.41