User Interface Board Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11368911
Fix dishwasher buttons not responding or error codes E2 F2. This user interface control panel restores cycle selection. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
User interface was internally shorting out Robert V. • Winchester , TN • July 04, 2025
Replaced user interface reinstalled front cover and added in affresh and ran a cycle. Works like a dream now!
Read more
More
$92.62
- Compare At:
-
$109.29
- You Save:
-
$16.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10185970
The Timer is an OEM part for Whirlpool dryers. It controls the electrical components and the timing of the dryer cycles, ensuring that clothes are dried for the appropriate amount of time.
Over time, timers can become faulty due to normal wear and tear, electrical surges, or internal mechanical failure. If the timer motor fails or the contacts inside the timer wear out, it will no longer be able to accurately regulate the dryer’s cycle duration.
Symptoms of a bad timer include:
- Dryer not starting
- Dryer running continuously without advancing through the cycle
- Dryer stopping mid-cycle
- Inaccurate cycle times
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer not heating Glen W. • Plano , TX • August 20, 2014
Checked all of the thermostats for continuity and all were working so I just replaced timer. That fixed the problem.
Read more
More
$96.77
- Compare At:
-
$115.61
- You Save:
-
$18.84
Genuine Ge part
By: Ge
Part Number: WR55X11072C
This electronic control board manages your refrigerator's key systems—compressor, fans, and defrost. When the original board fails, you may see warm temperatures or erratic behavior; replacing it restores stable cooling and proper defrosting.
- Regulates compressor and fan operation to maintain set temperatures
- Controls adaptive defrost timing and energizes the defrost heater
- Distributes power to critical loads and processes sensor inputs
- Helps with: no cooling or intermittent cooling, compressor/fans not running, heavy frost from no defrost, or unresponsive/erratic controls
What's included: 1 main control board Install notes:
- Disconnect power before servicing; risk of electric shock
- Use ESD protection; handle the board by the edges only
- Photograph and label connectors; transfer wires exactly and fully seat each plug
- After installation, restore power and follow any model-specific service sheet/configuration steps provided with the appliance
Do-It-Yourself Stories from Customers like You
Front door would no longer dispense cold water Marc B. • Port Orange , FL • February 18, 2018
After some simple troubleshooting, determined that it was likely the (rear) main control board. Once the new board arrived, it was installed in 5-10 minutes once the refrigerator was pulled out from the wall and the area cleaned up a bit. My only negative feedback was that delivery was too slow by today's standards. Fedex Post was used and in my experience it usually adds an extra 2-days compared to other ground shipping methods. The part was ordered on Sunday night. It shipped out of...
Read more
More
$184.06
- Compare At:
-
$202.47
- You Save:
-
$18.41
Genuine Frigidaire part
By: Frigidaire
Part Number: 134743500
Washer won't spin or shows communication error? The motor control board controls spin speed and motor functions. DIY repair in 30 minutes with video guide.
Do-It-Yourself Stories from Customers like You
E5b error code on frigidaire gallery front load washer Michael B. • Seattle , WA • October 26, 2015
This was the motor control board (also called the speed control board, motor control unit, or MCU in various places across the web). The repair was straightforward, except for two complications. First the old part was difficult to access in this model washer (Frigidaire Gallery Series front load washer). Instead of being easy to reach on the left side where there was space, it was sort of behind the actual motor on the right side of the housing. I spent some time trying to figure out...
Read more
More
$173.76
- Compare At:
-
$233.32
- You Save:
-
$59.56
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577356
Fix a washer that won't advance through cycles or gets stuck on wash. This mechanical timer controls cycle progression. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Timer went in kenmore washer Carrie B. • Schuylerville , NY • December 05, 2014
The repair guy was going to charge me upwards of $225 to replace the timer in my washer, if in fact it was the timer. I decided with Christmas just a month away that there had to be a better way. After speaking with one repairman, and then searching on the internet, I found out the problem with my Kenmore washer was probably the timer. Sears was going to charge me a lot to ship the timer and they wouldn't allow me to return it if after replacing it, it wasn't the problem. So, I got back on...
Read more
More
$138.95
- Compare At:
-
$168.62
- You Save:
-
$29.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10366605
Freezer icing up or refrigerator too warm? This defrost control board coordinates defrost cycles to prevent frost buildup. DIY-friendly 15-30 min repair.
Do-It-Yourself Stories from Customers like You
Whirlpool refrigerator evaporator frozen up with ice along with warm refrigerator compartment Wesley W. • Millbrook , AL • February 26, 2015
Tried to put refrigerator in defrost mode and defrost would not initiate. Checked the bi-metal and heater, both tested good. Replaced the ADC board and refrigerator went in to defrost. problem solved.
Read more
More
$227.53
- Compare At:
-
$230.80
- You Save:
-
$3.27
Genuine Whirlpool part
By: Whirlpool
Part Number: W10775980
The control panel on your dishwasher's door houses the cycle selection buttons and indicator lights. Replace if cracked, worn, faded, or missing.
Do-It-Yourself Stories from Customers like You
Cracked start button on control panel door balance kit Michael G. • Treasure Island , FL • September 22, 2014
Removed torx screws attaching stainless liner to outer stainless door. Lift off inner door and carefully separate the electronic components from where they snap into the control panel. Relocate electronic components to the new control panel. Reattach the inner liner with the torx screws. It is helpful to have an extra set of hands to hold the control panel while making the electronics swap to avoid pulling on the wiring harness.
For door balance kit I just followed the video, straight forward.
Read more
More
$86.95
- Compare At:
-
$103.47
- You Save:
-
$16.52
Genuine Ge part
By: Ge
Part Number: WD21X22177
Fix a dishwasher that won't respond to button presses or has all lights stuck on. This control panel interface board restores operation. DIY repair.
Do-It-Yourself Stories from Customers like You
User interface board was bad. David H. • Elkhart Lake , WI • April 30, 2023
Replaced the board and put it back together.
Read more
More
$86.49
- Compare At:
-
$102.06
- You Save:
-
$15.57
Genuine Ge part
By: Ge
Part Number: WD21X31903
Fix a dishwasher that won't turn on or has non-responsive buttons with this control panel interface board. DIY-friendly repair, typically takes 20 minutes.
Do-It-Yourself Stories from Customers like You
Dishwasher control panel not working. James Z. • Apex , NC • December 01, 2023
Replaced the UI Control Board.
Read more
More
$80.77
- Compare At:
-
$96.12
- You Save:
-
$15.35
Genuine Whirlpool part
By: Whirlpool
Part Number: 285938
Fixes washers that won't advance through cycles or stop mid-cycle. Timer controls wash cycle progression and automatic shutoff. DIY install in 10-20 minutes.
Do-It-Yourself Stories from Customers like You
Cycles would not complete Jonathan G. • Newton , MA • December 21, 2016
I could not find specific online instructions for this job. Here are some tips.
1. Unplug the washer.
2. Unscrew the dial on the broken timer.
3. Gently pry up the thin plastic place-indicator plate (the thing with the arrow under the dial) with two flathead screwdrivers.
4. Unscrew the two hex screws holding the old timer in place.
5. Unscrew the phillips-head screws holding the console in place and flip up the console.
6. Remove the electrical connector from the bad timer, and remove the bad...
Read more
More
$134.74
- Compare At:
-
$160.34
- You Save:
-
$25.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2183400
Freezer frosting up or refrigerator not cooling? The defrost timer controls the defrost cycle. DIY-friendly repair, typically 30 minutes to install.
This part fixes the following symptoms
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Freezer frosting up Nathan F. • Belgrade , MO • April 17, 2015
Replaced the heater, timer, and wiring harness
Read more
More
$63.65
- Compare At:
-
$75.11
- You Save:
-
$11.46
Genuine Frigidaire part
By: Frigidaire
Part Number: 316455430
This is the electronic oven control board that manages cooking functions including temperature regulation, bake and broil cycles, and clock/timer operations. It mounts behind the control panel at the back of the range. Replace this board if the oven fails to heat, displays error codes, has an unresponsive control panel, or runs at incorrect temperatures.
Do-It-Yourself Stories from Customers like You
No oven no ignighter nothin' honey Beth H. • Easton , MD • July 12, 2015
There was no power coming out of the control board to the igniter so I replaced the board and walay it work and all is good in the kitchen
Read more
More
$218.25
- Compare At:
-
$257.53
- You Save:
-
$39.28
Genuine Lg part
By: Lg
Part Number: 6871W1N012B
This board controls electrical relays that manage various oven functions, mounted inside the range's control housing. Symptoms of failure include oven elements not heating, erratic temperature control, or complete loss of oven operation.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
F7 error code not heating lg electric range Starr B. • Danbury , CT • January 24, 2016
We ordered the Pwb(pcb) Assembly,sub, Part Number 6871W1N012B & received the part the next day. I couldn't believe how fast. My husband was able to replace in 15 minutes. My oven worked again!
Read more
More
$161.95
- Compare At:
-
$192.72
- You Save:
-
$30.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8572976
Washer won't advance cycles or skips rinse/spin? Timer controls wash, rinse, and spin cycles. Common DIY fix—most complete repair in 10 minutes.
Do-It-Yourself Stories from Customers like You
Dysfunctional washing machine timer Jeffrey E. • Fort Scott , KS • March 23, 2015
I diagnosed the problem, identified faulty parts, and replaced those components.
Read more
More
$212.95
- Compare At:
-
$255.54
- You Save:
-
$42.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 241705102
Freezer frosting up or refrigerator losing cooling? The defrost timer controls defrost cycles to prevent frost buildup. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
When refrigerator would go into defrost it would trip breaker John M. • Fort Myers , FL • November 01, 2020
I replaced the defrost thermostat and the defrost timer. That corrected the problem. Be careful when ordering your parts. I put in my model# and they gave me a defrost timer that was incorrect. I had to return at my cost and order the correct one. Don't assume because you put in your model# that the part is correct. On each part there is a box to put in your model# to check to see if it fits your model. Don't assume that because you put your model# in before that it fits. If not sure, call them...
Read more
More
$77.76
- Compare At:
-
$93.31
- You Save:
-
$15.55
Genuine Ge part
By: Ge
Part Number: WH12X10478
Fix a washer that won't advance through cycles or skips fill/agitate steps. This timer controls cycle sequencing. DIY repair in about 30 minutes.
Do-It-Yourself Stories from Customers like You
The timer switch came detached from the bracket and the dial slot slipped out of the shaft until i saw the repair video i did not know about the clip that locks the dial to the shaft Jeffery B. • Donalsonville , GA • September 04, 2015
I removed the dial knob and plate as instructed by the video, removed the front panel of the washer to access the switch. I found the plastic molded bracket that the timer rests on to be broken and the tab on the timer where it is attached by a screw to be broken. I ordered a replacement switch, dial and knob. When it arrived I replaced the parts as instructed, but I had to use super glue to hold the new switch in place due to the support tab on the washer panel being broken off. After letting...
Read more
More
$124.38
- Compare At:
-
$165.50
- You Save:
-
$41.12