Jet Pump Parts

• Noisy

Diagnosed the problem. The pump motor needed to be replaced. Took model number and looked part up on Appliance Parts Pro site and found the exact part. Ordered part with next day delivery . Part arrived as scheduled. Simple installation. Works like new. Thanks. Read more

DIY, changed motor and sump. Put a dab of valve lubricant on seal. Wet outer seal of sump to get it to seat in bottom of tub. Cleaned electrical connectors corroded by leak. Coated connectors with dielectric grease. Had to buy additional clamp. Two clamps came in the sump package but both fit the smaller hose only. Neither fit the large hose. I wish the correct clamps were included. Home improvement store clamp is a little too wide to fit between ridges in large hose. Read more

• Will not drain

Removed old pump and discoverd that two impellers were broken and that bearings were shot orderef new pump which recieved next day and installed workinh fine now Read more

Ordered new burner tubes and it was a easy install. Read more

I reviewed the schematic and saw the Volute Seal, and Impeller Seal were the two that were closest my source of water. After watching the video about changing the Impeller/seal I removed the motor, impeller, and volute; I found that the impeller seal was the faulty one in my case. Since I'd ordered the volute and impeller seal kits (as I wasn't sure which it was) I installed both while I had it apart. Runs great, no water - simple to do. The seal changes took about 20 minutes. The only... Read more

Checked catch filter and realized pump was gone. This is my 2nd time replacing a pump but 1st on machine. I have a cleaning business and my washer gets double the work. Pretty sure Clorox killed this pump. Have a wet vac, small star nut driver and help putting wire ring back on. That is hardest part. PARTS ALWAYS COME SUPER FAST FROM APPLIANCE PARTS PRO. Read more

I purchased a burner and a oven orifice replacement kit from Appliance Parts Pros. I downloaded an installation manual from Whirlpool and followed the instructions. It was pretty easy. The front burner orifices could be replaced by just taking off the burner cover. The back ones required removing the burner diffuser. You will need to reattach the back burner bottom assembies after you remove the diffuser before you unscrew the orifice or it might bend the burner piping causing it to not line up... Read more

Changing out the stovetop orifices from natural gas to propane- First thing, turn off the gas. On this model stove, there are five burners-two burners in the front, two in the back and one in the middle. The front two burners are different than the other three, they are the largest burners. You can use a 11/32 socket with an extension to go down the middle hole of the burner and screw-out the natural gas orifices. Taking the orifices out was easy. Putting the new orifices in is a different... Read more

First and foremost, don't believe everything you see on Youtube. In order to get to the gas solenoid that feeds the burner you MUST take the entire top off that side of the range. Remove the grates and burner tops. You will see 2x 20mm brass nut, or so it appears, that hold each burner in place on the splash/drip pan. It is not just a nut, it is a venturi that threads down into what is called the jet holder. You may get a socket on it and think you are getting it loose but, more than likely you... Read more

I replaced the Ignitor/Orifice Tube assembly. Read more

Replaced the pump and drain hose. The pump was easy. The replacement parts were identical to the bad parts. The drain hose was full of gook and smelled awful so I decided to replace that as well. The tag on the new hose alerted me to the procedure for installing a drain hose. If your dishwasher is not vented you need to create a high hose loop so that excess particles from the garbage disposal or dishwasher don't stay in the hose. The person that installed the dishwasher failed to do this which... Read more

I began the repair process with basic troubleshooting. The two-year-old Whirlpool dishwasher was not washing. At first, I thought it was not getting water. I did a system drain which removed most of the water. I waited a few minutes then attempted a light wash cycle without success, but I did hear the unit getting water. And I noticed the detergent cube slightly moistened on the floor of the washer. Google led me to your YouTube videos. I assumed (and hoped) it was the pump. From what I read... Read more

Found the parts I needed ordered them from your site Received them and installed in a few minuets and was done Read more