Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Start Switch Stack Parts

Best Seller
Washer Lid Check Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP207166

Washer won't start or keeps blowing fuses? The lid check switch ensures your washer only runs when the lid is closed. Easy DIY repair in under 30 minutes.

This part fixes the following symptoms
  • Will not fill with water
  • Will not agitate
See more...
Do-It-Yourself Stories from Customers like You My washer stopped it just sttoped working   Charles T. • Houston , TX • February 01, 2015

First I needed to replaced the timer. However that timer is no longer available. So I was not able to buy that part. A friend encouraged me to cross reference the part number. I did and I found another timer that claimed it would work on my machine. It looked very similar. I got the timer from you guys and put it in. The water valves worked right away but the motor did not. I researched more troubleshooting ideas and discovered I had a bad lid check switch. I got a new one of those from you... Read more

More
$45.30
Compare At:
$54.36
You Save:
$9.06

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Start Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3395382

The Start Switch is an OEM replacement part for Whirlpool dryers. It is an electronic component responsible for initiating the heating elements and tumble cycles upon user command from the control panel.   

Causes of a bad start switch involve general wear over extended use. Failure of the internal conducting surfaces interrupts circuit activation as well.

Symptoms of a bad start switch include:  

  • Heating elements or tumble cycles that will not engage properly
  • Dryer fails to operate or stops mid-cycle unexpectedly
  • Control panel appears non-responsive to selections  
  • Error codes related to ignition or power delivery faults

Note: This dryer push-to-start switch has 2 terminals.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric dryer models. 

This part fixes the following symptoms
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You Dryer wouln't start heard the timer working but the starter wouldn't start   Perry B. • Stockton , CA • December 05, 2014

I replaced the starter switch, that really didn't need to be replaced, and the thermal fuse, which did. Read more

More
$50.57
Compare At:
$60.18
You Save:
$9.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Freezer Compressor Start Relay
Genuine Frigidaire part
By: Frigidaire
Part Number: 297237702

Compressor clicks but won't start? Replace the start relay when your freezer stops cooling or the compressor shuts off after a few seconds. Quick fix.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Refrigerator quit cooling   Mitchell M. • Jackson , GA • May 12, 2017

First I have an LG French Door with a bottom freezer. It quit cooling. I went on line and watched some very informative You Tube videos. I trouble shot according to these videos. In these videos it shows that if there is a click coming off the compressor it has too meanings, the compressor is froze or the start relay is bad. I ohmed the compressor and had no open wires in the compressor. I then shook the relay and it was making noise. The videos stated that is there is a noise in the relay... Read more

More
$79.95
Compare At:
$95.94
You Save:
$15.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Cooktop Burner Control Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W11120791

Burner stuck on high or won't turn off? This burner control switch regulates heat settings. Moderate DIY repair—label wires before swapping.

Do-It-Yourself Stories from Customers like You Burner only worked on high   Thom R. • Bowdoin , ME • February 12, 2016

If one control starts to fail the rest are sure to follow soon - so I replaced all four on our JennAir S160. Looked up the parts on line. Due to my background as an aviation electrician in the Navy and then working as an electrical systems designer for a defense contractor the toughest part was the clean up. Oh Well. Read more

More
$78.27
Compare At:
$93.14
You Save:
$14.87

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Water Level Pressure Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134762010

Fix a washer that won't fill, overfills, or shows E35 error code with this water level pressure switch. Moderate DIY repair takes about 1-2 hours.

Do-It-Yourself Stories from Customers like You E35   Michael B. • Mechanicsville , VA • September 13, 2016

Water valve not closing all the way. Water keep entering washer even with power cord unplugged. Parts I ordered fit perfect. Ordered on Thursday night , parts there Saturday. Great service and shipping. Thank Read more

More
$45.95
Compare At:
$60.39
You Save:
$14.44

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Infinite Control Switch
Genuine Ge part
By: Ge
Part Number: WB24T10063

Fix a burner stuck on high or not heating with this infinite control switch. Common cause when burners won't adjust temperature. DIY repair in 20 minutes.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Burner only worked on high setting   Alejandro G. • East Meadow , NY • February 15, 2016

Ordered recommended part for GE appliance. Change was very simple. Followed instructions on video and removed one wire at a time. Very easy to change 5 to 10 minutes. Read more

More
$85.37
Compare At:
$101.59
You Save:
$16.22

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Electric Range Dual Element Infinite Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 318191023

If your dual burner stays on low and won't turn off, or the small element doesn't heat, this infinite switch may need replacing. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You Large element was very erratic on temperature low/high.   Rodney C. • Lake Wales , FL • March 01, 2018

Replaced the infinite, dual, switch. Very good instructional video for Safety, removal * install. Read more

More
$56.61
Compare At:
$67.37
You Save:
$10.76

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Water Level Pressure Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339251

Fix a washer that overfills, won't fill to the right level, or floods. This water level pressure switch monitors tub water. DIY install in 1 hour.

This part fixes the following symptoms
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Water level control wouldn't work   Micheal W. • Millville , UT • April 11, 2014

I replaced it and the new one fit perfectly. reassembled and fired it up. Worked as desired, like new... Read more

More
$130.95
Compare At:
$155.83
You Save:
$24.88

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Door Light Switch
Genuine Ge part
By: Ge
Part Number: WR23X29161

The Door Light Switch is an OEM part for GE refrigerators. It is designed to control the interior light of the refrigerator, turning it on when the door is opened and off when the door is closed.

Causes of a bad door light switch can include wear and tear over time, electrical malfunctions, or physical damage from regular use. A faulty switch can lead to improper functioning of the refrigerator light, impacting visibility inside the unit.

Symptoms of a bad Door Light Switch include:

  • Refrigerator light not turning on or off correctly
  • Light flickering or remaining dim
  • Light staying on even when the door is closed

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The refrigerator lights would not come on when doors were opened. Would not dispense ice or water.   William T. • San Diego , CA • August 08, 2022

Replaced both light switches for doors and everything works as it is supposed to. Read more

More
$30.95
Compare At:
$36.83
You Save:
$5.88

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Return Switch
Genuine Ge part
By: Ge
Part Number: WC21X20249

The Return Switch is an OEM part for GE trash compactors. This part ensures that the compacting ram returns to its starting position after each compaction cycle.  

Causes of a malfunctioning return switch can vary from electrical issues, such as short circuits or worn-out connections, to mechanical problems, including physical damage from wear and tear or blockages preventing the switch's activation.  

Symptoms of a faulty  Return Switch include:

  • The compactor ram fails to return to its original position after a compaction cycle.
  • The unit does not start or operate correctly, indicating issues with the cycle initiation.
  • Unusual noises or behavior from the trash compactor, suggesting that the ram is not aligning or moving as expected.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The trash compactor would not cycle without me holding kick plate up for whole cycle when it did get back to the top of the cycle it would only stop if i opened the door   Mike D. • Pine Mountain , GA • December 15, 2014

TALKED TO YOUR REPRESENTATIVE AND WE WENT THROUGH ALL THE ON/OFF AND LIMIT SWITCHS. NARROWED IT DOWN TO TWO SWITCHS. THE ON/OFF SWITCH AND THE LIMIT SWITCH ON THE DOWN CYCLE SIDE. REPLACED ON/OFF AND DETERMINED THAT THAT WAS NOT THE ISSUE. THEN UNCOVERED LIMIT SWITCHS AND REPLACE DOWN SWITCH, FIXING THE PROBLEM Read more

More
$10.79
Compare At:
$12.95
You Save:
$2.16

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Rotary Temperature Switch
Genuine Ge part
By: Ge
Part Number: WH12X10498

Fix a washer that won't fill with hot or cold water. This rotary temperature switch controls water temperature settings. Easy 5-minute DIY repair.

This part fixes the following symptoms
  • No hot or cold water
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You No hot water would fill the washer in any cycle or temperature setting if the temperature setting was set to "hot" absolutely nothing would happen when turned on (cold washes worked fine)   William H. • St Louis , MO • December 30, 2014

Replaced the water temperature selector switch. After watching a YouTube video for our GE top loading washer showing the switch replacement, I replace the switch in under 5 minutes! Very easy! Read more

More
$18.95
Compare At:
$22.36
You Save:
$3.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Push-To-Start Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10420741

This push-to-start switch initiates the dryer cycle when the start button is pressed. It sends a signal to the motor and control circuit to begin tumbling and heating. Replace this switch if pressing the start button produces no response, the dryer only runs while you hold the button down, or the switch feels loose or does not click when pressed.

Do-It-Yourself Stories from Customers like You The push start button didn't start the dryer   Kirsten K. • Fayetteville , NC • July 21, 2016

I replaced the part i ordered and it worked great! Read more

More
$27.37
Compare At:
$32.30
You Save:
$4.93

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Water Level Pressure Switch
Genuine Samsung part
By: Samsung
Part Number: DC96-01703C

Washer overfilling or not filling properly? The water level pressure switch controls fill cycles. Easy 15-minute DIY repair with our video guide.

This part fixes the following symptoms
  • Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You Samsung clothes washer wa456 code ie u6   John D. • Howard Beach , NY • February 28, 2015

This error code indicated faulty water level and wash cycles were exhibiting either no water or too much water. Saw utube vid using this part for this type of problem and so far the repair is working well. Part arrived in 2 days, it was the right part and the machine is working the way its supposed to so I'm very happy. The worst scenario would have been to hire a repair guy to rip me off for a "Johnson Rod" I didn't need. Read more

More
$82.95
Compare At:
$97.88
You Save:
$14.93

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Potentiometer
Genuine Bosch part
By: Bosch
Part Number: 00422748

The Potentiometer is an OEM replacement part for Bosch gas range or cooktops. It functions as a three-terminal resistor that adjusts the flow of electric current, which in turn, controls the ignition and temperature of the cooktop. This component is essential for the precise operation and control of the gas burners, ensuring they light up and maintain the desired flame intensity.

Causes of a malfunctioning Potentiometer can be attributed to wear and tear, electrical issues, or damage due to spills and cleaning products. A compromised potentiometer affects the flow of electric current, leading to issues with the ignition and temperature control of the gas burners.

Symptoms of a bad Potentiometer include:

  • The cooktop not lighting or staying lit
  • The ignitor continuously clicking without igniting the burner
  • Inability to adjust the flame intensity or temperature accurately

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Do-It-Yourself Stories from Customers like You One burner on my thermador cooktop (pcs484ccus) would not light   Kinn K. • Haslet , TX • June 08, 2015

After watching a youtube video, I disassembled the front cover on the cooktop (be sure to turn off the power supply). I then switched the potentiometers on two burners. The burner that was not working now worked and the burner that did work did not. Easy to find the culprit....ordered a new potentiometer from here and though I only got regular shipping, it was actually delivered the NEXT DAY! 5 minutes, put in the new part, and all burners work. Great site, thanks for the help! Read more

More
$56.95
Compare At:
$67.77
You Save:
$10.82

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Door Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813601

The Door Switch is an OEM part for Frigidaire dryers. This part ensures that the dryer operates safely by only allowing the machine to run when the door is completely closed. Positioned typically at the door frame, the switch activates when the door is shut, signaling the control system that it's safe to begin the cycle.

Over time, door switches can wear out or become damaged, which can interfere with the normal operation of the dryer. 

Symptoms of a faulty Door Switch include:

  • The dryer not starting when the door is closed.
  • The dryer stopping unexpectedly, which might be due to a loose or faulty switch.
  • A lack of the usual "click" sound that indicates the door has latched properly, suggesting the switch isn’t engaging.
  • The dryer continuing to run when the door is opened, which poses a significant safety risk.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer will start, run for a few second, then turn off. No error codes   John M. • Waikoloa , HI • April 03, 2014

By reading the forums I first thought it may be the thermostat. I bypassed the thermostat wiring and the dryer still turned off after a few second of running. The second check was for the door switch. I couldn't find an explanation of how to bypass, so I just ordered a new one to try. It worked. Read more

More
$33.95
Compare At:
$40.40
You Save:
$6.45

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Top Burner Infinite Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W11120795

Fix a burner that won't heat, stays hot, or can't adjust temperature. This infinite switch controls power levels. Simple DIY repair in 5-10 minutes.

Do-It-Yourself Stories from Customers like You Stem broke off on surface unit switch   Robert Z. • Hampstead , MD • July 09, 2016

Replaced switch with a new one. also replaced the 4 knobs Read more

More
$73.95
Compare At:
$88.00
You Save:
$14.05

IN STOCK
Ships Today Guaranteed
Add to Cart
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store