Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Drives the drum rotation for even drying. Replace if dryer drum won't turn, makes squealing noises, or clothes stay wet. Confirm fit with your model.
I found a video on Youtube which described dryer drum squeaks as most likely caused by a worn rear drum bearing. I located the model number on the inside lip of the dryer door: Frigidaire Affinity LEQ6000ES2. I googled "frigidaire affinity dryer squeak". I got a link for my friends at AppliancePartsPros.com! I've used Appliance PartsPros 3 times before, so I figured I was in a "one-stop-solution" situation. I ordered a rear drum bearing kit as well as a dryer drum belt (after nearly 7 years... Read more
Supports and allows smooth drum rotation in your dryer. Replace if you hear squealing, grinding, or rattling noises during operation. Verify fit with your model.
Seals the bottom of your dishwasher door to prevent water leaks during wash cycles. Replace if worn, cracked, or loose. Confirm fit with your model.
A quick google search lead me to the problem - the plastic door gasket had become loose and broken. Received the part very quickly and installed it that night after a little trial and error. What the videos don't tell you is that to properly 'seat' the gasket you need to angle it UP when you push it into the little gap. If you angle it up, it will catch and seat properly, if you just push it in normally, it won't catch on the right part and it'll just hang loose at the bottom of the door and... Read more
Replaces cracked, broken, or melted lower spray arm in your dishwasher. Snaps into place on the lower rack. Common damage from falling onto heating coil.
Installed new sprayer arm. It was super easy. Read more
Mounting bracket that secures the lower spray arm to the dishwasher sump. Replace if cracked, broken, or missing to prevent spray arm detachment or tilting.
The fix took 30 seconds. The key to success was your video that explained how reinstalled parts "lock in". Read more
Fix a dishwasher door that won't close or latch shut with this door latch assembly. Easy 5-10 minute repair with basic tools and installation video.
With your part thanks Read more
Fix a dishwasher that won't drain or makes grinding noises. This drain pump assembly removes water after each cycle. DIY repair in under an hour.
After inspecting screen and drain hose with no obvious cause, replaced drain pump. Removal of the pump was very straight forward. 3 screws, 2 electric connections, and 1 hose clamp was all that was needed. Read more
Replace the sprayer in the middle of the dishwasher, the problem was the grommet on the back of it but it's not available individually. Read more
Supports the dryer drum for smooth rotation. Replace if your dryer squeals, makes grinding noises, or the drum sags. Verify fit with your model number.
The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible. Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem. Next step was to... Read more
Dishes still wet after cycle or water not heating? The heating element heats water for cleaning and promotes drying. DIY repair in under 30 minutes.
My very handy husband replaced the part and now I have a working dishwasher again. Thank goodness we were able to find the part-otherwise we would have been out of pocket for a lot more cash! Read more
Fix a dishwasher that won't spray water from arms or makes loud grinding noises. This circulation pump motor kit restores proper wash action. DIY: 1-2 hours.
Replaced the pump motor. Works great again. I saw the picture of the part on the website so I knew I was getting the right part and watched the video to see if there were any shortcuts. Easy job. Read more
Dryer won't heat or stops heating after 10-15 minutes? Gas valve coils control burner ignition. Simple 5-10 minute repair with video guide included.
Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits. I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have. I looked up my dryer, decided what was probably the problem,... Read more
Replacement upper spray arm for dishwashers. Installs in the top rack area to distribute water during wash cycles. Needed when original is cracked or broken.
Screwed off the broken piece, the threaded piece was still there, the arm had broken off, screwed in the new piece, Presto all fixed. What a cake, thanks Read more
Dryer won't start or stops mid-cycle? A broken door catch prevents secure closure, triggering safety shutoffs. Simple snap-in replacement, 1 minute.
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts. Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum... Read more
This trap is a molded drain fitting used in select Frigidaire-built appliances. It helps keep water flowing in the correct direction while limiting backflow of air and debris, supporting proper drainage and reducing leaks or odors when the original fails. What it does
We replaced the Filter and the SoilTrap. Read more
Replace broken, cracked, or missing lower dishrack wheel assemblies. Snaps onto rack to allow smooth gliding in and out of dishwasher. Easy install.
I went to appliancepartspros.com and searched "dishwasher rack rollers" and found mine immediately using only the make of the machine. It took me another 5 minutes to order the parts and check out. I received the parts in two days using the most economical shipping method. It took less than ten minutes to make my dishwasher as good as new! A very simple job made more simple by using appliancepartspro.com. Read more