Jkp76g002 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (372)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Bake Element

4.9 (714)

By: Ge

Part Number: WB44X200

The Oven Baking Element is an OEM part for GE electric ranges and wall ovens. This baking element is located at the bottom of the oven cavity and provides heat from below during baking function. Even, consistent heating is vital for optimal cooking performance.

Causes of a bad baking element can include mineral buildup from repeated high temperature use that interferes with heating ability. Element coils breaking or blowing out is also common after several years of use.

Symptoms of a bad baking element include:

Inconsistent or inadequate heating from the bottom of the oven
Cook times longer than normal for many recipes
Error codes indicating issues with the lower heating element
Open or shorted element coils preventing any heating

This OEM GE replacement is also compatible with Hotpoint, RCA, and some Kenmore electric wall oven models.

This part fixes the following symptoms

Oven is too hot
Little to no heat when baking
Oven not heating evenly
Element will not heat

Do-It-Yourself Stories from Customers like You Broiler element burnt out on very old oven Deloris B. • Spokane , WA • November 23, 2015

I cannot not sing the praises of this company & their helpful & fast service. I am going to post the online site address w/my praises on my facebook page for my friends that live on ranches many miles from appliance repair shops & towns. The Oven in our house is for sure over 20 yrs old it was in this home when we bought it, the home is 33 yrs old & the Oven is a Wall Oven, there is not room for a standard Oven in this Kitchen. The Oven itself still looks very nice. About 8 yrs ago or more... Read more

$30.60

Compare At:: $68.17
You Save:: $37.57

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Broil Element

4.9 (177)

By: Ge

Part Number: WB44X173

The Broil Element is an OEM part for GE ovens. It is designed to provide the high heat necessary for broiling food, such as meats and vegetables, allowing for a quick cooking process that seals in flavors and creates a deliciously crispy exterior.

Causes of a bad Broil Element can include failure due to internal coil damage, burnout from excessive use, or electrical issues such as short circuits or loose connections that prevent it from heating.

Symptoms of a bad Broil Element include:

The oven not heating up to the set broil temperature.
Uneven cooking or browning of food.
No visible glow from the element during operation.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Oven not heating evenly
Won't start
Element will not heat

Do-It-Yourself Stories from Customers like You Broiler element burnt out on very old oven Deloris B. • Spokane , WA • November 23, 2015

$28.23

Compare At:: $61.01
You Save:: $32.78

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Bake Element

4.9 (147)

By: Ge

Part Number: WB44K5013

The Oven Bake Element is an OEM part for GE ovens. This component is located at the bottom of the oven cavity and is responsible for generating the heat needed for baking. By converting electrical energy into heat, the bake element ensures even temperature distribution throughout the oven, allowing for consistent cooking results.

Causes of a malfunctioning Oven Bake Element may involve visible signs of wear or damage, like blistering or holes, a break in the element that hinders proper heating, and burnout or malfunctioning resulting from age or excessive use.

Symptoms of a failing Oven Bake Element include:

The oven not heating to the set temperature
Uneven baking results
No visible glow from the element when the oven is turned on
The oven taking longer than usual to preheat

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly

Do-It-Yourself Stories from Customers like You Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014

Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds. Read more

$63.95

Compare At:: $76.10
You Save:: $12.15

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Best Seller

Genuine Ge part

Handle End Cap

4.9 (123)

By: Ge

Part Number: WB7X7183

Color: Black
Each package includes one end cap. For the white version, order part number WB7K5319.

The Handle End Cap is an OEM part for GE ranges. This part plays a role in capping the ends of the range handle, allowing a seamless and aesthetically pleasing finish while also preventing injuries by covering potentially sharp edges.

Causes of a bad handle end cap include physical impact, frequent cleaning that leads to wear, or degradation due to exposure to kitchen grease and heat.

Symptoms of a bad hand end cap:

A loose or incomplete look of the range handle, affecting the overall design and functionality.
Exposed sharp edges that could pose a safety risk to users.
An unsecured handle, which may affect the ease of opening and closing the oven door.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You End caps broke ge oven door handle fell off spouse distraught oven ugly and kitchen towel homeless; but food tasted fine Kenneth A. • Round Rock , TX • February 28, 2015

1) Opened package, 2) unwrapped end-caps, 3) broke off guide pieces with pliers, 4) inserted caps in both end of handle, 4) unscrewed 6 Phillip screws to remove oven-door fascia, 4) unscrewed two end-cap retainer bolts with nut driver to release remnants of broken end-caps, 5) re-inserted bolts back through the oven door engaging the new end-caps on each end, 6) tightened bolts while begging the new end-caps not to break, 7) positioned fascia back over the oven door, 8) restored the 6 screws to... Read more

$22.70

Compare At:: $28.41
You Save:: $5.71

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Broil Element

4.9 (89)

By: Ge

Part Number: WB44K5009

The Broil Element is an OEM part for GE ovens. This element is located at the top of the oven and is crucial for the broiling function, providing high heat for cooking dishes such as meats and vegetables directly under the heat source. The broil element glows red hot when in use, creating the necessary temperature to sear food and lock in flavors.

Symptoms of a failing Broil Element include:

The element not heating up when the broil setting is activated
Uneven cooking or lack of browning on food intended to be broiled
Visible damage to the element, such as blistering, bubbling, or breaks in the element coil
No visible glow from the element during operation

Causes of a bad broil element often involve burnout from regular use, electrical issues such as faulty wiring or a malfunctioning thermostat that doesn't cycle the heat correctly.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Element will not heat

Do-It-Yourself Stories from Customers like You Broil element burned out Tommie S. • Greensboro , NC • June 12, 2014

Once I received the element within three days, I simply removed the other element by unclipping and unplugging lugs in rear. Placed the new one in clips and connected lugs and all was good! Read more

$66.95

Compare At:: $79.67
You Save:: $12.72

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Screws - 12 Pack

4.9 (75)

By: Ge

Part Number: WB1X500D

These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.

This part fixes the following symptoms:

Loose or wobbly parts or panels within the appliance's interior or exterior
Panels or components falling out of place, creating gaps or exposing internal parts
Unusual noises or rattling sounds during the appliance's operation

The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014

I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle. https://www.youtube.com/watch?v=cQwLtRcHx9k Read more

$7.65

Compare At:: $9.10
You Save:: $1.45

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Support Bracket

4.9 (33)

By: Ge

Part Number: WB2X9719

The Support Bracket is an OEM part for GE ovens, designed to provide stability and support for the broiling element. This bracket is essential for ensuring the broiling element is securely positioned at the top of the oven, allowing for even heat distribution and optimal cooking performance when broiling foods.

Causes of damage to the support bracket often involve high heat exposure, accidental impacts during cleaning or cooking, or general wear and tear over time.

Symptoms of a bad Support Bracket include:

The broiling element hanging lower than usual or touching the oven cavity, which can affect cooking performance and potentially damage the oven's interior.
Unstable or loose broiling element, leading to uneven cooking or broiling.
Visible signs of wear, damage, or corrosion on the bracket itself, indicating it may no longer provide adequate support.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014

Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds. Read more

$8.69

Compare At:: $10.43
You Save:: $1.74

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Light Lens

4.9 (42)

By: Ge

Part Number: WB36X192

The Oven Light Lens is an OEM part for GE ovens, designed to protect and cover the oven light bulb. It allows for a clear view of the oven's interior, making it easier to monitor the cooking progress without opening the oven door, thus maintaining a consistent temperature.

Over time, the oven light lens can become discolored or cloudy from exposure to high temperatures, grease, and food splatters, which can diminish its effectiveness. Additionally, accidental bumps or cleaning can lead to cracks or breaks in the lens.

Symptoms of a bad Oven Light Lens include:

Diminished light output, making it hard to see inside the oven
Cracks or damage to the lens itself
Discoloration or cloudiness that cannot be cleaned off
The lens becoming loose or falling off

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Oven would not heat and oven light wouldn't work Garett N. • Lubbock , TX • May 06, 2016

Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service... Read more

$10.95

Compare At:: $13.14
You Save:: $2.19

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Broiler Pan Kit

5.0 (46)

By: Ge

Part Number: WB48X10056

The Broiler Pan Kit is an OEM part for GE ranges. It serves as a secure platform for positioning meats, vegetables, and various foods directly beneath the broiler element, ensuring safe and efficient cooking. The pan is about 17 inches wide by 13 inches deep.

Over time, wear and tear can affect broiler pans, causing issues such as flaking or stripping of the non-stick coating and the development of small ridges or holes that permit grease to drip down.

Symptoms of bad broiler pans include:

Grease fires caused by dripping grease contacting the heating element
A burnt or smoky flavor transferring to foods
Difficulty removing baked-on grease and food deposits
Pans that are misshapen or developing small cracks

This OEM GE replacement part is also compatible with select Hotpoint, RCA, and some Kenmore ranges

Do-It-Yourself Stories from Customers like You None Ralph W. • Brentwoo , NY • July 13, 2014

Fast delivery, great service Read more

$26.95

Compare At:: $32.34
You Save:: $5.39

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Probe Thermistor

5.0 (7)

By: Ge

Part Number: WB20T10024

The Probe Thermistor is an OEM replacement part for GE wall ovens and ranges. Located inside the oven cavity, this temperature-sensitive probe precisely monitors interior heat to safeguard against overcooking.

Causes of a faulty thermistor involve exposure to excessive cooking temperatures, moisture infiltration from spills or steam, or basic failure due to old age.

Symptoms of an inadequate probe thermistor include:

Inaccurate temperature readings and baking inconsistencies
Oven temperature exceeding desired setting risking fire

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You I needed anew probe for my convection oven (geprofile) Ronald S. • Charlotte , NC • September 21, 2014

I looked diligently for this probe for many months and to no avail. So desperate to find it , I Goggled and found this provider for the probe. I was amazed at the timing of the receipt of the item. I received an email within hours that it had been shipped the same day and arrived at my home within less than 48 hours! The price was great and the item was easy to locate on the site.. Thank you for your attention and customer service. I will use these folks again! Read more

$52.73

Compare At:: $63.28
You Save:: $10.55

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Rack

4.6 (7)

By: Ge

Part Number: WB48T10093

The Rack is an OEM part for GE ranges, designed to provide a sturdy and reliable surface for baking and roasting your favorite dishes. This high-quality metal rack fits perfectly inside GE ovens, allowing for optimal air circulation around the food for even cooking.

Causes of a bad Oven Rack can range from excessive weight placed on the rack, improper cleaning methods leading to rust, or general wear and tear over time.

Symptoms of a bad Oven Rack include:

Difficulty sliding the rack in and out, which can be caused by warping or damage
Rust or corrosion, which can contaminate food and affect the overall cleanliness of the oven
Unstable positioning, leading to uneven cooking or the risk of dishes tipping over

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Wanted new oven racks for an older ge oven. They're difficult to find until i found appliancepartspros.com Jim H. • Irvine , CA • August 26, 2017

Put them in my oven and they were a perfect fit. Read more

$80.66

Compare At:: $95.99
You Save:: $15.33

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Shop With Confidence

Over 15 million customers served!

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Genuine Ge part

Screw (10-16 X 0.812, Hex Washer Head)

5.0 (3)

By: Ge

Part Number: WB1K5157

This hex washer head screw secures appliance panels and brackets. The 10-16 x 0.812 size replaces missing or stripped hardware so components stay properly fastened, helping prevent looseness, rattling, and misalignment.

Fastens metal panels, brackets, and components in compatible appliances
Replaces a lost, damaged, or corroded screw to restore proper attachment
Helps reduce vibration, noise, or loose-fitting parts caused by missing hardware
Correct 10-16 thread and 0.812-inch length for specified mounting points

What's included: One hex washer head screw. Install notes:

Disconnect power; for gas models, also shut off the gas supply.
Note the original screw's location and orientation before removal.
Start threads by hand to avoid cross-threading; tighten snugly without over-torquing.
Use a nut driver or socket that fits the hex head.

Do-It-Yourself Stories from Customers like You Door handles were missing Dianne T. • Tacoma , WA • December 03, 2017

It was very easy!. Just removed the screws off the trim plate and access was right there. The double oven was given to me but the handles were missing and the end caps so I just had to replace them. Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Ge part

Screw

5.0 (6)

By: Ge

Part Number: WB1M1

ST10-16 X 7/16"

Do-It-Yourself Stories from Customers like You Bottom heating element not working on a ge electric range David K. • Portsmouth , RI • December 21, 2014

Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy. Read more

$7.65

Compare At:: $9.18
You Save:: $1.53

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Ge part

Screw

4.7 (3)

By: Ge

Part Number: WB1X1130

This replacement screw secures appliance components so panels, brackets, and assemblies stay tight and aligned. Replace stripped or missing hardware to eliminate rattles and keep your unit assembled safely and correctly.

Fastens panels, brackets, or components to the appliance frame
Restores a secure fit when the original screw is lost, stripped, or corroded
Helps prevent vibration noise and movement during operation
Supports proper alignment of trim and assemblies

What's included: One replacement screw Install notes:

Disconnect power; for gas units, also shut off the gas supply
Use the correct driver to avoid stripping the head; do not overtighten
Inspect and address damaged mating threads, clips, or brackets before reinstalling
Refer to your model's parts diagram to confirm location and quantity

Do-It-Yourself Stories from Customers like You Broken door hinge on a ge wall mount double oven Cheryl A. • Mckinney , TX • June 18, 2018

We replaced the broken door hinge. Read more

$13.95

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Ge part

Oven Door Latch Assembly (Self-Clean Lock)

4.5 (4)

By: Ge

Part Number: WB49T10020

This oven door latch assembly secures the door during the self-clean cycle and reports lock status to the control. Replace a worn or failed latch to restore safe locking and reliable self-clean operation.

Locks the oven door during self-clean to prevent opening at high temperatures
Signals the control when the door is locked or unlocked
Helps the oven start and complete a self-clean cycle safely
Typical symptoms: self-clean won't start or finish, door won't lock/unlock, lock motor runs continuously or is noisy, lock indicator stays on

What's included: One oven door latch assembly Install notes:

Disconnect power at the breaker and allow the oven to cool completely before servicing
Access is typically from the top or behind the control panel; remove panels as required and note linkage/switch orientation
Transfer any linkages or mounting hardware from the original latch in the same orientation
Manually cycle the latch to verify smooth operation before restoring power and testing self-clean

Do-It-Yourself Stories from Customers like You Door latch froze halfway between cleaning lock and open would not close or open Craig M. • Carmel , IN • November 14, 2014

Worked with phone person at AppliancePartsPros and determined problem could be either the latch motor or the circuit board. Ordered parts for both the latch motor and the control circuit board. Since a relay on the board was clicking and the motor would not budge, I installed them both and oven is working again!! Presumably because of the number of warehouses, I ordered the parts on Sunday and they arrived Tuesday morning. Great help! Great speed! Perfect matches on the parts!! Read more

$139.70

Compare At:: $193.08
You Save:: $53.38

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Jkp76g002 Parts

Appliance Light Bulb

Oven Bake Element

Oven Broil Element

Oven Bake Element

Handle End Cap

Oven Broil Element

Screws - 12 Pack

Support Bracket

Oven Light Lens

Broiler Pan Kit

Probe Thermistor

Rack

Screw (10-16 X 0.812, Hex Washer Head)

Screw

Screw

Oven Door Latch Assembly (Self-Clean Lock)