Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Refrigerator not cooling or compressor won't start? A failed run capacitor prevents the compressor from running. DIY repair in 10-15 minutes with video guide.
In short - I replaced the evaporator fan motor and the evaporator fan blade. The Appliance Parts Pros website was extremely helpful to me. Here's how. 1. The site helped me identify that even though my Freezer says it's a Frigidaire, it's actually an Electrolux. 2. The site identified the potential screech causing parts. (I didn't take a chance, I bought all three) It was a worthwhile investment. My freezer is 20 years old so it deserved some help. 3. The site provided guidance videos (not... Read more
The Freezer Door Key is an OEM replacement part for Frigidaire refrigerators. This small but essential component is designed to securely lock the freezer door, preventing accidental openings or unauthorized access.
Symptoms of needing to replace the freezer door key include:
Causes of a faulty freezer door key can include normal wear and tear over time, physical damage due to impact or mishandling, or issues with the locking mechanism itself.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.
Ordered a new seal, and replaced it with a new one freezer works great now. Read more
LED light bulb illuminates your refrigerator interior. Replace when bulb burns out, flickers, or stops working. Verify fit with your model number.
Replaced both The electrical board I found under the fridge was very easy to replace. The fan motor took a minute to bed puns and the biggest challenge was taking off/on the back panel to get to it. (By the way it was located in the freezer section. take drawers out to get to it. Read more
The Disposer Splash Guard and Stopper Kit is an OEM replacement part for GE garbage disposers. It includes replacement splash guard rings and stopper balls that fit beneath the disposer mount. These parts work to contain odors, drain water, and direct sound down the drain during operation.
Over time, the splash guard and stopper can wear out due to continuous exposure to food waste, water, and cleaning chemicals. Damage or deterioration of these components can lead to ineffective sealing, allowing water and debris to splash out or preventing the stopper from forming a tight seal.
Symptoms of a bad splash guard and stopper kit include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Splash guard is odd size and not available at hardware stores. Found the part at your company and was delivered next day. The disposal is now fixed. Read more
Includes service line.
Had a friend who is an appliance repair tech. Replace the evaporator, the heater coil, and the filter/drier. Parts were soldered together and the compressor was put under vacuum. Then, charged with 5 oz. of refrigerant. The freezer works great now! Read more
The Frigidaire Touch-Up Paint is white in color in a .6 fl oz bottle. For almond order 5303321320. For black order 5303321321.
The Touch Up Paint is an OEM part for Frigidaire appliances. Whether you're dealing with scratches, chips, or other minor cosmetic damage, this touch-up paint provides an easy and effective solution for maintaining the appearance of your appliance. It's designed to adhere well to metal surfaces, offering durability and resistance to further wear and tear.
Over time, appliances can accumulate minor surface damage from regular use, cleaning, and accidental impacts. Using the Touch Up Paint not only improves the aesthetic appeal of your appliance but also helps protect exposed areas from rust and corrosion, which can extend the life of the appliance.
Symptoms of needing Touch Up Paint include:
Quick touch up. The paint worked great. Packaged with a brush like nail poliish Read more
Freezer not cooling or running constantly? This compressor kit circulates refrigerant through the system. Advanced repair requires refrigerant handling.
Purchased a replacement COMPRESSOR. The compress or was a replacement for MFG. P/N 5304478809. The compressor was not an exact replacement. There was no port identification so the connections took a lot of time searching the net and then only the suction port was noted. I had to operate the compressor to be sure of the discharge port.The start relay on the original had no power plug as the new one did so had to improvise by cutting the wiring and adding 1/8 push on clips and then sliding on to... Read more
This controller kit is the appliance's main electronic control. It reads inputs from the user interface and sensors to power and coordinate key components. Replacing a failed controller restores responsive controls and consistent, reliable operation.
Replaced controller and starter relay Read more
This temperature control knob replaces a worn or missing knob so you can easily adjust the cold-control setting. Restores smooth, precise temperature adjustments and a clean, factory look. What it does:
I replaced defrost timer (which I am glad I did because of wear on the points) but that did not cure the problem. So after checking other components, I found that the temperature control was the culprit. No problem, I will simply order part # 2162521100. Well Frigidaire decided to obsolete that part and "Has not provided an approved substitute". So, I have to scrap this freezer and pay $800 to $900 for a new one? Not! So I kept looking at subsequent freezer temperature controls and found part #... Read more
Supports your freezer door and provides smooth opening and closing. Replace if bent, broken, or door won't stay aligned. Verify fit with your model number.
Pulled off the old one, put on the new. Read more
Replacement screw that secures brackets, shelves, trim, panels, and covers inside your appliance. Install when the original is missing, stripped, or corroded.
Replaced the handle. Read more
Fix a freezer that won't run or cycles inconsistently with this temperature control thermostat. Restores proper cooling when the control sticks or drifts.
New Control. Read more
Freezer won't shut off or stop cooling? This temperature control thermostat cycles the compressor on and off to maintain set temps. DIY repair.
Quantity of 1 clip.
Note: See kit# 5303922007 and 5304406520.
It was relatively easy, we took out the broken lid with the gasket then remove the clips, all of them were ok and we could use them again. Then we proceed to put the new lid with the gasket and use clips to fasten the lid. Read more
Color: black. It measures about 3 inches in diameter.