Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.
Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.
Symptoms of a compromised screw placement include:
This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you . Read more
This damper (shock absorber) assembly mounts between the washer's outer tub and the base frame to absorb vibration during the spin cycle. It helps keep the tub centered and reduces excessive movement and noise. Replace this part if your washer shakes violently, walks across the floor, or makes loud banging sounds during spin, especially with unbalanced loads.
Replace your washer's broken, cracked, or missing control knob with this rubberized grip selector dial. Installs on the control panel for secure turning.
I ordered the parts via my cell phone. The parts were shipped overnight express. I had them shipped to my main residence in Massachusetts. I took them up 2 days later to my summer home in Maine. I put the plate on and 5 seconds, I put the new knob on and another five seconds. The entire repair took less than Read more
Washer stops mid-cycle or won't start? Main control board manages all wash functions. Common fix for unresponsive controls. Moderate DIY repair.
Replaced control panel. Followed on-line instructions which were very straightforward. Read more
Seals the door opening on front-load washers to prevent leaks during wash and spin cycles. Replace if torn, cracked, or leaking. Verify fit with your model.
Hex washer head screw secures oven panels, brackets, and door handles. Replace missing, stripped, or damaged screws to eliminate looseness and rattling.
It was very easy!. Just removed the screws off the trim plate and access was right there. The double oven was given to me but the handles were missing and the end caps so I just had to replace them. Read more
Fixes washer not draining or leaving standing water. Replaces worn or clogged pump that causes cycle interruptions. Moderate DIY repair effort.
Manually Read more
Black. 8-18 AB HXW 3/8
I ordered the part and was impressed to receive it within two day! I didn't need the screws I ordered (which I ordered just in case) but the trim was put on with no problem and my oven looks brand new again! Thank you! Read more
Size: 10-32 GXTT FLP.595 S
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes. Thanks so much! Read more
Washer won't start or unlock after cycle? This door lock module secures the door during operation and signals the control board. Restores safe starts.
Watertight seal between washer tub halves. Replace if you notice leaks from the middle of the tub or during bearing repairs. Confirm fit with your model.
The bearings probably began to fail on my washer 1-2 years ago. We started hearing a clicking or popping noise during a spin which was due to play in the bearings. The failed bearings wore the shaft of the trunnion which caused me to have to replace bearings and trunnion. I was able to find a bearing kit on a very popular internet sales site and replaced the bearings rather than buying the rear tub with the bearings already installed. This was worth it to me but not for the faint of heart... Read more
This rotor position sensor (RPS) module monitors the washer's drive motor position and speed and reports it to the control. Replacing a failing sensor helps restore smooth agitation and dependable spin, reducing stalls and early cycle stops.
Purchased new RPS Hall Effect sensor, pulled rotor and stator and installed new RPS module. Works fine after new sensor! Repair took about 30 minutes. Perfect! Read more
Mounts on top of the wash basket to counterweight spin cycles. Replace if cracked, leaking fluid, or broken to restore smooth operation and reduce vibration.
By removing the drum from the washer. It was a 45 minutes job in total and the washer now looks like it's ready to go for three-five more years. Thanks for the prompt response. Read more
Fix washer not filling, slow fill, wrong temperature, or overfilling. This inlet valve controls hot and cold water flow into your tub during each cycle.
Secures dishwasher sump to tub, maintaining seal compression to prevent leaks. Replace if corroded or weak. Confirm fit with your model number.
Took the impeller out, removed the pump, replaced connector, put new clamps on, reassembled and checked for leaks. I just followed Arts video, went smooth. Wifes happy, things are good. Thanks AppliancePartsPros.com Read more
If your washer vibrates excessively or makes loud banging noises during spin, a worn suspension spring may be the cause. Supports the tub and dampens movement.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.