Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Thermistor is an OEM replacement part for Whirlpool ice makers. It is a temperature sensor that plays a crucial role in the proper functioning of the ice maker.
Symptoms of a need to replace the ice maker thermistor:
Causes of a faulty ice maker thermistor can include physical damage, moisture exposure, or general wear and tear over time, affecting its ability to accurately measure and report temperatures.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
I ordered a new bin thermistor. Took care of the problem right away. Read more
Fix a noisy or non-cooling refrigerator with this condenser fan motor. Solves overheating compressor issues. DIY-friendly repair with video guide.
I bought the listed condenser fan motor for my Maytag refrigerator. Access to the condenser fan is by removing sheet metal screws of bottom panel with 1/4 in. nut driver. Condenser fan is on left side of rear access area. Remove electrical connector by pressing-in connector release tab with thumb fingernail and pulling on connector. Remove three mounting screws with 5/16 nut driver. Work fan out to the right past the compressor. I used a pair of pliers, as a lever, behind the plastic fan blades... Read more
Fix an ice maker that won't fill with water or overflows constantly. This water inlet valve controls flow to produce ice. DIY repair in under an hour.
Tracked issue down to the unit not filling with water. Tested water valve with multimeter and found no conduction. This item was a direct replacement for w10646612 for my 3 year old KitchenAid KUIX505ESS1 under counter ice maker. Read more
The Pump is an OEM part for Whirlpool standalone ice makers. This pump is responsible for circulating water to the ice maker, ensuring a steady flow of water necessary for ice production. It plays a crucial role in maintaining the efficiency and functionality of the ice-making process.
Causes of a bad ice maker pump can include wear and tear over time, clogging from mineral deposits or debris, and damage from electrical surges or water leaks. These issues can disrupt water flow to the ice maker, leading to reduced or halted ice production.
Symptoms of a bad ice maker pump include:
Replaced part. Read more
Ice maker producing whole slabs instead of cubes? A broken cutter grid prevents proper ice separation. This wire grid slices frozen ice into uniform cubes.
New water tray to fix the crack in the housing holding lower pump. Removed ice cutter, ice scoop holder, ice freeze plate water drain, water fill tube and cover over main water pump. With a nut driver and taking my time had everything removed, cleaned and reinstalled in less than 60 mins. Easy repair and saved a bundle on a service call. All my parts arrived well packed and in three days. I have used this supplier several times before and I give the five stars. Read more
Fix water not draining or pooling issues in your ice maker with this drain pump. Common when ice is cloudy, small, or machine won't cycle. 1-hour DIY repair.
Replaced the pan and pump. I watched a video from another appliance parts supplier. That supplier did not have the repair parts available and would have to order from the manufacturer. AppliancePartsPros.com had the parts in stock and shipped them the same day. Read more
Ice maker not making ice or overfilling? This control board regulates water fill cycles and ice production. Moderately difficult repair with basic tools.
I replaced the control board after making sure the cutter grid was OK. Read more
Fix ice maker not making ice, leaking water, or freezing to walls. Complete assembly replacement restores ice production. Moderate DIY repair.
Take off freezer door and tried to take off top shelf. Never got shelf off. Made it more difficult but got it replaced. Read more
Refrigerator light won't turn on or off when opening the door? This door light switch controls interior lighting. DIY repair in under 10 minutes.
Replaced light switch. That did not work, problem was in led lights. Read more
This start relay (EMB) energizes the compressor's start winding so the refrigerator can begin cooling reliably. Replacing a weak relay can resolve hard-start clicking and restore consistent operation when the compressor struggles to start.
Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)
I ordered new seals from AppliancePartsPros.com. Finding the right seals was very easy, all based on model number of the appliance. While looking my unit over for other signs of wear, I noticed that a repair done by the prior homeowner to the lower wash arm was done improperly: a seal there was set protruding from the cover, the cover was missing screws, and the arm was missing the upper bushing. So I ordered a new seal, the missing screws, and both the top and bottom bushings (just to be... Read more
Replace your ice maker's water distribution tube if cracked, broken, or kinked. Routes water between internal components to restore proper flow.
This tube is very difficult to work with due to its location behind the cold plate. I loosened the two screws on the left, but there's no way to get the screws on the left loose. I cut the hose off of the pipe at the top of the cold plate and slowly worked it out. The new tube comes folded in half, putting a bad crimp in the middle. The easiest way to get rid of the crimp is to pour boiling hot water onto the crimped area and then open up the tube. I didn't do it, but you might want to... Read more
The Screw is an OEM part for Whirlpool refrigerators. This screw secures the refrigerator door hinge in place, allowing the door operates smoothly and seals properly.
Over time, screws can become loose or go missing during repairs or adjustments, which can lead to a misaligned door, compromised sealing, and increased energy consumption.
Symptoms of a bad screw include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
As soon as the parts arrived, installed them seamlessly. Thank you. Read more
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more
Replace your ice maker's water tube to restore proper flow and eliminate leaks. Install when cracked, kinked, or brittle. Confirm fit with your model number.
Seals the drain port to contain water and prevent leaks. Replace if cracked, stripped, or missing to maintain proper drainage. Confirm fit with model.
The drain cap fit perfectly. They knew exactly which one I needed. Read more