Kuix335hp500 Parts

The Thermistor is an OEM replacement part for Whirlpool ice makers. It is a temperature sensor that plays a crucial role in the proper functioning of the ice maker.

Symptoms of a need to replace the ice maker thermistor:

• Ice maker not producing any ice or producing insufficient quantities
• Ice cubes freezing incompletely or with an irregular shape
• Error codes or warning lights related to the ice maker or temperature sensing

Causes of a faulty ice maker thermistor can include physical damage, moisture exposure, or general wear and tear over time, affecting its ability to accurately measure and report temperatures.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Motor-Condenser Fan is an OEM part for Whirlpool refrigerators. This motor drives the condenser fan, which is essential for cooling the compressor and expelling heat from the refrigerator. By maintaining optimal temperatures within the cooling system, it ensures the efficient operation of the refrigerator.

Over time, the motor-condenser fan can fail due to electrical issues, wear and tear, or exposure to dust and debris. A malfunctioning fan motor can lead to overheating and reduced cooling efficiency.

Symptoms of a bad motor-condenser fan include:

• The refrigerator running continuously or not cooling properly
• Unusual noises from the back of the refrigerator
• The compressor overheating
• Poor airflow around the condenser coils

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Pump is an OEM part for Whirlpool standalone ice makers. This pump is responsible for circulating water to the ice maker, ensuring a steady flow of water necessary for ice production. It plays a crucial role in maintaining the efficiency and functionality of the ice-making process.

Causes of a bad ice maker pump can include wear and tear over time, clogging from mineral deposits or debris, and damage from electrical surges or water leaks. These issues can disrupt water flow to the ice maker, leading to reduced or halted ice production.

Symptoms of a bad ice maker pump include:

• No ice production or insufficient ice output
• Unusual noises coming from the pump area
• Water leaks around the ice maker
• The ice maker not filling with water properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The  Valve is an OEM part for Whirlpool ice machines. It regulates the water flow to the ice maker, ensuring that the correct amount of water is supplied to produce ice. This valve is crucial for the consistent operation of the ice maker, providing the necessary water flow to create ice cubes effectively.

Over time, the ice machine valve can become faulty due to wear and tear, mineral buildup from hard water, or electrical malfunctions. A damaged valve can lead to issues with ice production and water flow within the machine.

Symptoms of a bad valve include:

• No ice production
• Insufficient ice production
• Water leaks around the valve area
• Ice cubes being too small or irregularly shaped

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Ice Maker Cutter Grid is an OEM part for Whirlpool ice machines. It is responsible for slicing the ice into uniform cubes after the ice has formed in the ice maker's mold. This cutter grid ensures that the ice is separated and dispensed properly, providing consistent ice cube sizes for your convenience.

Causes of a bad ice maker cutter grid can include electrical issues affecting the grid's heating element, wear and tear from extended use, or damage due to ice buildup and blockages. 

Symptoms of a bad ice maker cutter grid include:

• Irregularly shaped or uneven ice cubes
• Ice cubes sticking together and not dispensing properly
• The ice maker not producing any ice
• Visible damage or corrosion on the grid wires

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Drain Pump is an OEM part for Whirlpool free-standing ice machines. This part removes excess water from the ice machine.

Common causes of a bad pump include debris accumulation, wear and tear from regular use, or electrical issues that affect the pump's operation.

Symptoms of a bad drain pump include:

• Water not draining from the ice machine
• Unusual noises during the draining process
• Standing water inside the machine
• Reduced or halted ice production

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Control Board is an OEM replacement part for Whirlpool ice machines. It governs all electrical functions and ensures proper icemaking operation.

Causes of a bad control board include water damage shorting circuits, wear over time degrading electrical connections, and failures in sensor components.

Symptoms of a faulty control board include:

• Ice maker not operating or turning on at all
• Erratic operation with inconsistent ice production
• Fault or error codes displayed
• Electromechanical noises coming from the electronics

Compatible with additional brands like Maytag, KitchenAid, and Roper icemakers as well, it ensures reliable ice production for entertaining needs.

This water pan mounts in the base of the dishwasher to collect incidental water, helping protect floors and internal components. Replace a cracked or warped pan if you notice puddles beneath the unit or recurring leak/float alerts. What it does:

• Collects and contains water in the dishwasher base during leaks or splashes
• Channels water to the leak float/sensor area on many models to trigger a safety shutdown
• Helps prevent moisture from reaching flooring and electrical components
• Failure signs: puddles under the dishwasher, repeated leak/float errors, or visible cracks/warping in the tray

• 1 water pan

• Disconnect power and water supply; wear gloves to avoid sharp edges
• Remove the toe panel and pull the dishwasher out to access the base
• Reuse any model-specific clips/seals and ensure the leak float/sensor is correctly seated in the new pan
• Reinstall, level the unit, and run a short cycle to check for leaks

This start relay (EMB) energizes the compressor's start winding so the refrigerator can begin cooling reliably. Replacing a weak relay can resolve hard-start clicking and restore consistent operation when the compressor struggles to start.

• Delivers initial power to the compressor's start winding, then disengages once the motor is up to speed
• Supports reliable compressor starts and reduces repeated start attempts
• Common symptoms: clicking from the compressor area, rising refrigerator/freezer temperatures, compressor starts then stops after a few seconds, or heat damage on the old relay
• Works with EMB-style compressor connections used on select units

• Disconnect power to the appliance before servicing
• Remove the rear access cover; note wire positions; pull the old relay straight off the compressor terminals
• Seat the new relay fully on the compressor pins; reconnect the harness and any run capacitor lead exactly as removed
• Reinstall the cover and restore power; use caution—capacitors may retain a charge

The Door Switch Assembly is an OEM replacement part for Whirlpool refrigerators. It is responsible for turning the light on when you open the refrigerator door and turning it off when the door is closed. It ensures that the light functions properly, allowing you to easily locate and retrieve items from your refrigerator.

Symptoms of a faulty door light switch include:

• Interior light not turning on when the door is opened
• Interior light staying on even when the door is closed

A bad door light switch can occur due to regular use, wear and tear, or accidental damage. If you notice issues such as the interior light not turning on or off when you open or close the door, it may be time to replace the door light switch.

This Whirlpool replacement part is also compatible with Sears/Kenmore models.
 

Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)

This replacement tube routes water safely between internal components. Use it to replace cracked, kinked, or brittle tubing so your appliance can restore proper water flow and reduce leaks during normal operation.

• Directs water between components to support normal operation
• Helps maintain consistent flow and leak-resistant connections
• Common failure signs: cracks, kinks, discoloration, or hardening
• Symptoms include water leaks, reduced flow, or intermittent filling

• Disconnect power and shut off the water supply before servicing
• Note original routing and fitting type; transfer any clips or ferrules if present
• Cut ends square and fully seat into push-to-connect or compression fittings
• Restore power and water; check all connections for leaks and proper flow

The Screw is an OEM part for Whirlpool refrigerators. This screw secures the refrigerator door hinge in place, allowing the door operates smoothly and seals properly. 

Over time, screws can become loose or go missing during repairs or adjustments, which can lead to a misaligned door, compromised sealing, and increased energy consumption. 

Symptoms of a bad screw include:

• The refrigerator door seems misaligned or does not close properly.
• Increased effort needed to open or close the door.
• Unusual gaps around the door seal when closed.
• The door might squeak or make other noises during operation.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

This drain cap seals the appliance's drain port so water stays contained and the system drains as designed during operation and cleaning. Replace a cracked, stripped, or missing cap to stop leaks and help prevent debris from entering the drain path. What it does:

• Seals the drain opening to prevent leaks and air intrusion
• Helps maintain proper water flow during draining and cleaning
• Keeps debris from entering and clogging the drain
• Common symptoms: puddles under the unit, dripping at the drain area, cap won't tighten, or visible cracks/wear

• 1 drain cap

• Disconnect power and turn off the water supply before servicing
• Place a towel or shallow pan to catch residual water
• Remove the old cap and clean the drain port's sealing surface
• Hand-tighten the new cap until snug; do not overtighten. Restore water and power, then check for leaks.

This replacement tube routes water between internal components, helping maintain proper flow and reduce leaks. Replacing a cracked, kinked, or brittle tube restores a secure water path and reliable performance. What it does:

• Provides a sealed pathway for water between components
• Helps prevent leaks when tubing is intact and properly seated
• Restores flow lost to kinks, cracks, or mineral buildup
• Common symptoms include visible cracks, leaks, or restricted water flow

• 1 tube

• Unplug the appliance and shut off the water supply before service
• Relieve line pressure and place towels to catch residual water
• Note the original routing; cut ends square and fully seat into fittings
• After installation, restore water and check carefully for leaks before reassembling panels