Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.
By visiting your website, viewing the repair instructions and ordering the right parts. Very easy to understand and to do the repair.. Read more
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks Read more
Creates an airtight seal to prevent warm air entry and frost buildup. Replace if freezer frosts up or door doesn't seal. Confirm fit with your model number.
Your chat line told me how to fix it, basically I followed their directions. IMO us DIY saved us at least $100. for service call and new gasket. Removed old gasket while new one soaked in tub hot water for 15 minutes. Started at top corner pressing new gasket into slot worked around to the bottom gasket pressed firmly in place. Slowly closed freezer door wife and I held it in firmly place 15 minutes. Every 15 minutes or so pushed on freezer door. After an hour put food back in freezer firmly... Read more
Fix no ice dispensing or plastic shavings in ice. This ice bucket assembly collects and stores ice from your ice maker. DIY replacement in minutes.
I broke the ice bucket when the problem first started as I kept trying to get the ice out of the dispenser. I replaced the Icemaker Asembly in less than 5 minutes, 1 screw and that was that. Everything works great and my dispenser is back in action. I did have a repair man come out to correctly diagnose the issue as the parts were expensive and I wanted to make sure it was not a leak somewhere, but indeed the mechanism. He charged me 40 to confirm the issue and I ordered the parts. Could... Read more
Ice maker stopped making ice or won't eject cubes? This refrigerator ice maker assembly fixes common production issues. Simple 10-minute install.
I ordered a replacement ice maker and replaced the ice maker. it was really simple. one phillips head screw, a quick connect electrical connection, and a locking tab on the ice maker was all that it took to replace. Read more
The ASM Cover Veg Pan is an OEM part for GE refrigerators. It serves as a cover for the vegetable crisper drawer, helping to maintain the freshness of stored produce by providing a controlled environment. This cover supports the shelf above the crisper and can also act as an additional storage surface.
Causes of a bad ASM cover veg pan can include cracks or breaks from heavy use, warping due to temperature fluctuations, or general wear and tear over time. These issues can compromise the cover's ability to properly seal the vegetable drawer and support the shelf.
Symptoms of a bad ASM cover veg pan include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I ordered the replacement part and changed out the assembly myself. Read more
Ice dispenser paddle broken or won't close? This ice chute door and funnel assembly fixes stuck or damaged dispensers. Moderate DIY, 30-45 minutes.
Disconnect the power to the fridge. First remove the control panel by removing the one screw underneath and then insert a screwdriver into the small square hole underneath in order to pull the lower left of the control panel towards you. You are pulling against a plastic clip and you need to pull fairly hard. Once the lower left clip is free the other three come unclipped fairly easily. At this point it will make life easier if you unclip the wiring connector from the control panel and put it... Read more
The Ice Maker is an OEM part for GE refrigerators. This component is responsible for producing ice cubes by filling the ice mold with water and freezing it until the ice is ready to be dispensed.
Causes of a bad ice maker can include wear and tear from regular use, issues with the water supply, or mechanical failures within the unit.
Symptoms of a bad ice maker include:
Clear plastic cover that fits over the pantry or deli drawer in your refrigerator. Replace if cracked, broken, or pivot tabs are damaged or snapped off.
The instructions for replacing the cover on the website were very helpful. It explained what needed to be disassembled in order to install the cover without risking breaking the new cover. Read more
Fix water dispenser leaks or dripping with this refrigerator water line connector fitting. Stops leaks at tubing connections. Quick DIY fix.
We ordered a water valve and my husband put it in. It works great. Read more
Fix a refrigerator with no water dispenser flow, slow water, or leaking dispenser. This dual water inlet valve controls water to the dispenser and icemaker.
After reading some other reviews that were having a similar problem I ordered a water valve that is located in the lower rear of the refer. The change out took less that ten minutes and was similar to the video. The ice maker now is making ice and seems to be working properly. The repair was made easy with the help of Appliancepartspros. Thanks for the help Read more
This temperature sensor monitors internal refrigerator temperatures and relays them to the control, helping the unit maintain consistent cooling. Replacing a failed sensor restores accurate temperature regulation and more reliable operation. What it does:
I've cleaned the drain tube numerous times. Always freezes and plugs. Added a defrost tab down into drain tube, missing from factory. This time defrost heater bad. Replaced heater, bi-metal switch and temp sensor. Great service and next day receipt of parts. Thanks ! Read more
This is the flip-out center rail for French-door refrigerators. It closes the gap between the fresh food doors to maintain a tight seal, helping keep cold air in and moisture out for consistent cooling. What it does
Replaced it with new Asm French. Read more
Water filter head assembly holds the filter and connects water lines. Replace if you have no water flow or leaks. Confirm fit with your model number.
First, verified that water filter wasn't the problem by removing it and installing bypass plug. Second, verified that water was flowing from supply valve by disconnecting line to automatic water valve and observing flow into a bucket. Third, verified automatic water valve was functioning correctly by connecting supply line directly to automatic water valve. With the filter, water supply, and automatic water valve eliminated as problems, the filter head was identified as the problem by process... Read more
Replacement water reservoir assembly for refrigerators. Stores water for dispenser and ice maker. Replace if cracked, leaking, or frozen to restore proper flow.
Found water reservoir had frozen solid and had cracked (no idea yet why it froze). I had previously fixed a frozen drain from the cooler by wrapping 12 Ga bare copper wire around the heater element and routing into the drain hole and that was working and clear. So I ordered and replaced both water reservoir and water reservoir heater in case the heater was not working fully. Very Easy to fix by removing vegetable drawer and shelves. Only tool was a Philips screwdriver. I did NOT replace hoses... Read more
This dispenser cover assembly replaces a cracked or damaged dispenser housing cover to restore a clean appearance and help the dispenser direct ice and water properly. Molded plastic protects internal components and maintains dispenser alignment. What it does:
Replaced control panel. Read more