Christopher K Grantham , NH June 22, 2015 Kitchenaid dishwaser would not complete cycle Replaced control board. This did the trick! The dishwasher works great again. Read More... 35 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers
Palmer S Spartanburg , SC November 10, 2015 Appliance: Whirlpool Undercounter Dishwasher DU1100XTPQA Blinking pots and pans light Based on feedback found on the internet, I knew it was either the control panel or control board. Ordered both and it turns out I only needed to replace the control panel. Really easy fix. Turned off the power, unscrewed the top 6 screws to open up the control panel. Removed the cover and disconnected the ribbon cable. Took off the latch assembly and control panel by gently pushing in the plastic tabs. Attached the new control panel by snapping everything back in place, reconnecting the ribbon cable, and putting the cover back on. Screwed everything back in place with the six screws and turn pack on the power. So far, everything is working good as new. Read More... 31 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Nuno R Glastonbury , CT September 02, 2014 The control board was acting up The repair went well. The dishwashers up in running now no problems Read More... 10 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Mercedes S Edmonds , WA February 09, 2015 Power surge caused appliance not to work Opened up the panel and could tell part of the transformer had melted. replaced that part and it's now working fine. Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers
Michael S Pacifica , CA January 21, 2018 Appliance: Model KUDP02CRBS1 YEAR INSTALLED 2006 Kitchenaid dishwasher mod #kudp02crbs1 year 2006 front overlay quit working again! Our dishwasher quit working again for the 3rd time recently. We researched on You Tube for similar issue, and possible fixes. We had power to the overlay so we ruled out a thermal fuse as most possible problem. Some mode lights would come on when pushed. Tried a self diagnosis test-nothing. Reset circuit breaker-nothing. We had replaced the overlay once two years ago so thought this time it might be a Interconnect Board or a Electronic Board. After consulting with a rep (thank you Joyce) on the phone from AppliancePartsPros we decided to order all three parts and hope that it was one of them that was bad. Parts arrived in just two days, amazing!! I changed the Interconnect Board, still not working. Next decided to change the Overlay Board "again" and that fixed the problem. Not sure why the OLB went bad again for third time. Will keep new parts for now in case of future issues! Kitchenaid (Whirlpool) please take note, your Overlay Boards evidently are cheaply made!! First one lasted 9 yrs, second one barely two! Lets see how long the third one lasts!! Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers