Wap24200uc Parts

If your washer won't drain or water pools in the drum, this drain pump forces water out through the hose. Moderate DIY repair, about 1 hour to replace.

The Hinge is an OEM component specifically designed for Bosch front-loading washers. Comprised of precision-engineered washers and backing plates, it secures the tub and door connection for smooth, dependable operation. The hinge washer allows natural gliding movement without door alignment or cushioning issues.  

Causes of failure include wear from years of intermittent friction between heavy-moving components. Physical damage such as cracks around riveted fasteners weaken structural integrity as well over time.

Symptoms include:  

• Noisy or grinding sounds emanating from hinges during use
• Misaligned or leaning door unable to fully close/seal 
• Loose door requiring adjustment more often than expected
• Possible door separation calling for hinge replacement

Replacing with this genuine Bosch hinge washer restores balanced operation. Compatible with some Miele and Asko front-loaders also, smooth controlled movement provides consistent washing relief with OEM replacement.
 

Washer won't spin or shows F:43/E:21 error? Worn motor brushes are the likely cause. This repair typically takes 15-30 minutes with basic tools.

Delivers hot water from your heater to the washer. Replace if leaking, cracked, or damaged to prevent water damage. Verify fit with your model number.

The Fastening Ring is an OEM replacement part for Bosch washers. This part is responsible for securely fastening the boot seal to the washer's drum, ensuring a watertight seal and preventing leaks during the washing cycle.

A bad fastening ring can occur due to wear and tear, damage from foreign objects, or improper installation. Signs of a faulty fastening ring include water leaks around the washer's door or visible damage to the boot seal.

Symptoms of a bad fastening ring include:

• Water leaks around the washer's door
• Excessive noise or vibration 
• Visible damage or deformation of the ring

Replace your worn-out or damaged fastening ring with this genuine OEM Bosch part to restore your washer. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

Shock absorber that cushions vibrations during spin cycles. Mounts between the drum and base. Replace if cracked, leaking, or worn to restore stability.

This bearing set replaces the slide bearings in the dishwasher rack rails. It restores smooth, even rack movement and helps keep the rack aligned so loading and unloading is easier and the rack stays securely on the tracks. What it does:

• Guides and supports the rack as it slides on the rails
• Reduces friction for smoother, quieter rack travel
• Helps maintain proper rack alignment to prevent tilting or binding
• Common symptoms: rack is hard to slide, feels rough, pops off rails, or bearings are cracked/missing

• One manufacturer-packaged bearing set

• Disconnect power and water supply before servicing
• Pull the rack out; remove rail end caps/stops per your model's design
• Note orientation; remove worn bearings and snap the new set into the rail channels
• Reinstall end caps and verify the rack moves smoothly before running a cycle

The Valve is an OEM replacement part for Bosch clothes washers. It regulates water intake, determining volumes for specific cycles. Balanced flow conserves resources without sacrificing clean performance. 

Causes of a bad valve can include mineral deposits clogging internal pathways over time. Constant opening/closing stresses rubber seals and disrupts precision.

Symptoms of a bad valve include:

• Inconsistent or insufficient water levels between loads   
• Washer fills on small loads wasting water 
• Extended cycle times as valve struggles to meter H2O
• Leaks that seep from the valve body into internal components

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Replacement leveling foot supports and levels your washer for steady operation. Install this foot if yours is worn, cracked, or missing to restore balance.

Fix a washer that leaks or fills when off with a new valve magnet coil. This electromagnetic solenoid controls water flow during wash cycles.

Clear panel that installs in your washer's door to restore visibility. Replace if cracked, broken, or missing to maintain a safe barrier and complete seal.

Routes water between internal washer components. Replace if cracked, brittle, or leaking to restore watertight connections. Verify fit with your model.

Front drum motor mounting bushing for washers. Supports the drum shaft for smooth rotation. Replace if worn, cracked, or causing misalignment issues.

Secures and stabilizes washer components to maintain proper alignment and sealing. Replace if worn, cracked, or causing leaks. Confirm fit with your model.

Fix unresponsive controls or cycle selection issues with this washer control board. Manages timer functions and display feedback for reliable operation.

Washer not starting or displaying error codes? This sensor monitors cycle functions and signals the control board. Typically a 20-30 minute repair.