B22ct80sns01 Parts

Restore dependable ice production with this replacement ice maker assembly. It automatically fills, freezes, and ejects cubes into the bin, resolving common ice maker failures so your refrigerator consistently makes ice again without using manual trays.

• Produces ice by controlling the fill, freeze, and ejection cycle
• Coordinates with the water inlet valve for proper fill levels
• Stops making ice when the bin is full to prevent overfilling
• Common symptoms: no ice production, cubes not ejecting, leaking/overfilling at the ice maker, or clicking/grinding from the unit

• Disconnect power and turn off the household water supply before servicing
• Remove the ice bin/cover, release mounting hardware, and unplug the wire connector; transfer brackets/screws as needed
• Ensure the fill tube is correctly aligned with the ice maker's fill cup
• After installation, restore power/water and discard the first batches of ice as the system clears

The Damper is an OEM part for Bosch refrigerators. It is a part that regulates the airflow within the refrigerator compartments, ensuring proper air circulation and temperature distribution.

Causes of a malfunctioning Damper can include physical obstruction or damage preventing proper opening and closing, as well as wear and tear on the damper mechanism itself over time. 

Symptoms of a bad Damper include:

• Uneven cooling or hot spots within the refrigerator
• Difficulty maintaining consistent temperatures in different sections
• Excess frost buildup or moisture accumulation

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Replacement water inlet valve that controls water entering the dishwasher so cycles fill correctly. Restores reliable fills and helps address no-fill, overfill or intermittent-fill issues when the original valve fails. What it does:

• Directs and meters incoming water into the wash chamber to achieve proper fill levels.
• Opens and closes to allow water during fill cycles; a failed valve can cause no water, intermittent filling, or extended cycles.
• Prevents uncontrolled water flow at the inlet when seals and valve components are intact.

• Disconnect electrical power and shut off the water supply before beginning any work.
• Access typically requires removing the lower access panel or toe kick; basic hand tools are usually sufficient.
• Inspect inlet hoses and seals during replacement and replace any damaged components to avoid leaks.
• After installation, restore water and power, run a short cycle, and check for proper filling and any leaks.

This door switch detects when the appliance door is closed and signals the control so cycles can start—restoring normal operation when the door mechanism is the cause of power or cycle issues. What it does:

• Completes the circuit when the door is closed so the appliance can run
• Prevents operation with the door open or improperly latched
• Common symptom: appliance won't start or stops mid-cycle when the door is closed
• Common symptom: controls unresponsive or lights/indicators behaving inconsistently

• One door switch

• Disconnect power before accessing or replacing the switch
• Remove the door or inner panel as needed per your model's service instructions
• Handle electrical connections carefully; match wire terminals and secure all fasteners

This ice mold is the formed tray that holds and shapes ice inside the refrigerator's automatic ice maker. It restores proper ice formation so trays fill and release solid, usable cubes. What it does:

• Holds water while the ice maker freezes it into cubes
• Supports even freezing to help full molds form
• Allows the ice maker to eject cubes cleanly when harvested
• Addresses symptoms like small, misshapen, or absent ice production

• One replacement ice mold

• Disconnect power to the appliance before attempting service
• Remove any ice and thaw the area if frozen before swapping the mold
• Handle carefully to avoid damaging mounting tabs or sensors

Left Side Endcap, for Right Side Endcap order 00631852. Note: Equivalent Left Side Endcap is WPW10122078.

The Refrigerator Pantry Door Endcap is an OEM part for Bosch refrigerators. It is designed to support and secure the pantry door, allowing it to open and close smoothly.

You should replace this endcap if it becomes damaged or worn out. Causes of a bad pantry door endcap can include repeated use, accidental impact, or wear and tear over time.

Symptoms of a bad pantry door endcap include:

• Difficulty in opening or closing the pantry door
• The pantry door not staying securely in place
• Visible cracks or damage to the endcap

This OEM part is also compatible with some Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement door seal restores a tight, reliable seal to the appliance door to help stop leaks and maintain proper internal temperature. It fits into the door channel and replaces worn, torn, or deformed gaskets. What it does:

• Seals the door opening to prevent water leaks and reduce air exchange.
• Helps maintain consistent internal temperature and energy efficiency.
• Stops visible gaps, cracks, or compressed areas that cause leaks or drafts.
• Restores proper door closing and reduces moisture build-up around the door.

• One replacement door seal/gasket.

• Disconnect power and water supply before starting any repair.
• Remove the old seal fully and clean the channel; press the new seal into the door channel evenly.
• Work around the perimeter to ensure the gasket seats without twists; avoid sharp tools that can cut the seal.
• If the seal uses retaining clips or adhesive, reinstall or replace those per the manufacturer's instructions.

This is an OEM replacement screw used to secure components and panels on compatible Bosch appliances, restoring proper fit and preventing rattles or loose parts. What it does

• Secures panels, brackets, or assemblies to maintain proper alignment and fit
• Prevents vibration noise caused by loose or missing fasteners
• Replaces stripped, corroded, or lost screws for reliable reassembly
• Helps restore safe operation by keeping covers and guards in place

• Disconnect power to the appliance before servicing to avoid electrical hazard.
• Use the correct driver size to avoid damaging the screw head.
• Tighten until snug; avoid overtightening which can strip threads or crack plastic.
• Inspect mating threads and replace if damaged before reinstalling.

This water filter head and tubing holds the water filter and may need to be replaced if it is cracked or damaged, causing a leak.

This electronic control board manages a dishwasher's timed cycles and user interface, restoring proper cycle sequencing and electronic control when the original board has failed. Replaces a faulty module to regain reliable operation. What it does:

• Regulates wash, drain and dry cycle timing and sequencing
• Interprets commands from the front panel and sends signals to valves, pump and heater
• Monitors sensor inputs and safety interlocks for correct cycle operation
• Common symptoms: unresponsive controls, cycles that won't start or complete, error codes, or intermittent operation

• Disconnect power before servicing to avoid shock or board damage
• Handle the board by the edges and avoid static discharge; use an anti-static strap if available
• Some installations require removal of the control panel and connectors; do not force connectors or wiring

This drawer is the removable silverware/small-item cutlery drawer used in compatible dishwashers to keep utensils separated for better wash coverage and easy unloading. It provides a low-profile tray that holds forks, knives and small kitchen tools securely during cycles. What it does:

• Holds and separates silverware and small utensils to improve cleaning access and reduce nesting
• Keeps cutlery organized for faster unloading and handling
• Fits into the dishwasher's upper area as a shallow, low-profile drawer for delicate items
• Helps prevent smaller items from falling into the lower tub during wash cycles

• 1 drawer

• Refer to your dishwasher's service manual for correct placement and orientation before installing
• Remove power to the appliance and ensure racks are accessible; no electrical work is required for drawer replacement
• Handle edges carefully to avoid pinching; slide into existing guides until it snaps or seats securely
• If drawer will not seat or slide smoothly, inspect the rack guides and mounting clips for damage and replace as needed