Ge Profile Xl44 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Ge part

Oven Bake Igniter

4.9 (706)

By: Ge

Part Number: WB13K21

The Oven Igniter is an OEM replacement part for GE ovens, designed to ignite the bake igniter to start the heating process. This part is responsible for creating the spark that ignites the gas, providing the heat needed to cook and bake food. Over time, the oven igniter can wear out or become damaged, which can prevent the oven from heating.

Symptoms of a bad Oven Igniter include:

The oven not heating up at all.
The oven taking longer than normal to heat.
Gas smell in the oven due to gas being released without ignition.
A clicking sound without the oven igniting.

Causes of a bad igniter can include normal wear and tear over time, exposure to excessive heat or moisture, or physical damage from impact or mishandling.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

IMPORTANT: The connector plug may need to be cut off and igniter wires connected to range wires using porcelain wire connectors.

This part fixes the following symptoms

Little to no heat when broiling
Little to no heat when baking
Gas igniter glows, but will not light
Won't start

Do-It-Yourself Stories from Customers like You Oven burner would not light broiler burner would light Michael C. • Austin , TX • January 25, 2015

If the oven burner would not light but the broiler would this indicated that the safety valve is OK. Problem had to be with the igniter. Removed the bottom panel in the oven and restarted the oven. The igniter would not glow at all. It should be brilliant red. This is where the problem came in. I could not find the location of the model on the Kenmore range anywhere you would normally look - the back, the wiring envelope, the oven door jamb etc. Also the igniter cannot be removed from... Read more

$55.77

Compare At:: $98.14
You Save:: $42.37

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (372)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Round Style Oven Or Broiler Igniter

4.8 (495)

By: Ge

Part Number: WB2X9154

The Round Style Oven or Broiler Igniter is an OEM replacement part for GE gas ranges and cooktops. It has a round design and is responsible for reliably igniting the gas burners with each use. Range: 2.5 to 3.0 amps.

Causes of a bad igniter can include wear and tear from repeated heating and cooling cycles, damage or defects in the electrical components, or issues arising from long-term exposure to high heat.

Symptoms of a bad igniter include:

Difficulty starting or unreliable ignition of gas burners
Burners failing to ignite with the press of the control knob
Intermittent ignition problems
Clicking sounds but no ignition

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Little to no heat when broiling
Little to no heat when baking
Won't start
Gas igniter glows, but will not light

Do-It-Yourself Stories from Customers like You Bake oven would not heat up no glow from bottom oven igniter top oven broiler heats Vicente T. • Fort Wayne , IN • February 19, 2016

There are two igniters in oven, one for top broiler and one for bake oven at bottom. Your website help me troubleshoot the problem and locate the part. ordered part was delivered the next day. Following the instructions that others on your website had provided, the repair was quick and SUCCESSFUL. No need to pull out oven as power cord can be accessed from removing bottom storage drawer. Step 1: Remove the storage drawer from below the oven and disconnect the power cord from inside. No need... Read more

$95.75

Compare At:: $118.55
You Save:: $22.80

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Handle End Cap

4.9 (123)

By: Ge

Part Number: WB7X7183

Color: Black
Each package includes one end cap. For the white version, order part number WB7K5319.

The Handle End Cap is an OEM part for GE ranges. This part plays a role in capping the ends of the range handle, allowing a seamless and aesthetically pleasing finish while also preventing injuries by covering potentially sharp edges.

Causes of a bad handle end cap include physical impact, frequent cleaning that leads to wear, or degradation due to exposure to kitchen grease and heat.

Symptoms of a bad hand end cap:

A loose or incomplete look of the range handle, affecting the overall design and functionality.
Exposed sharp edges that could pose a safety risk to users.
An unsecured handle, which may affect the ease of opening and closing the oven door.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You End caps broke ge oven door handle fell off spouse distraught oven ugly and kitchen towel homeless; but food tasted fine Kenneth A. • Round Rock , TX • February 28, 2015

1) Opened package, 2) unwrapped end-caps, 3) broke off guide pieces with pliers, 4) inserted caps in both end of handle, 4) unscrewed 6 Phillip screws to remove oven-door fascia, 4) unscrewed two end-cap retainer bolts with nut driver to release remnants of broken end-caps, 5) re-inserted bolts back through the oven door engaging the new end-caps on each end, 6) tightened bolts while begging the new end-caps not to break, 7) positioned fascia back over the oven door, 8) restored the 6 screws to... Read more

$22.70

Compare At:: $28.41
You Save:: $5.71

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Sensor Assembly

4.8 (60)

By: Ge

Part Number: WB21X5301

The Oven Sensor Assembly is an OEM part for GE ovens. This part monitors the oven's internal temperature, ensuring it matches the set temperature on the oven's controls. By accurately measuring the heat inside the oven, the sensor assembly communicates with the oven's control system to adjust the temperature accordingly.

Over time, the oven sensor can become faulty due to wear or damage, leading to inaccurate temperature readings. This can manifest as unevenly cooked food, longer cooking times, or an oven that fails to reach the desired temperature setting.

Symptoms of a bad Oven Sensor Assembly include:

The oven temperature is inconsistent with the setting
Food is not cooking evenly or as expected
The oven fails to heat to the set temperature
Error codes appearing on the oven display related to temperature regulation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Oven is too hot
Won't start
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Wasn't commng up to temperture put it at 350 would only get up to 250 Michael U. • Dix Hills , NY • April 21, 2014

Spoke to a parts pro and told them of the problem. there were 2 possibilieies from the explanation of what the parts do. onw could have been the Range oven igniter. that wasn't it beaacause the over was lighting fine. by process of illimination it was the Oven Sensor Assembly. Read more

$123.00

Compare At:: $179.02
You Save:: $56.02

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Door Handle Endcap

4.7 (61)

By: Ge

Part Number: WB07X10034

The Oven Door Handle Endcap is an OEM part for GE ovens. This endcap attaches to the ends of the oven door handle, providing a finished look and ensuring a secure grip for opening and closing the oven door.

You should replace the oven door handle endcap if it becomes cracked, broken, or loose. Causes of a bad endcap can include frequent use, accidental impact, or exposure to high temperatures that can weaken the material over time.

Symptoms of a bad oven door handle endcap include:

The handle feeling loose or wobbly
Cracks or visible damage on the endcap
Difficulty in opening or closing the oven door
The endcap detaching from the handle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Broken handle endcap Doug P. • Spokane , WA • April 20, 2015

Removed old handle endcap by unscrewing the two outer screws on the oven door that screw into the endcaps and holds the door together that allows you access the one inner screw that holds the endcap in place. I removed the broken endcsp and replaced with the new one and screwed everything back together. Read more

$27.95

Compare At:: $34.14
You Save:: $6.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Double Drip Pan

5.0 (98)

By: Ge

Part Number: WB34K10009

The Double Drip Pan is an OEM part for GE ranges and stoves. It is specifically designed to sit beneath the burner elements, catching spills, drips, and crumbs that fall during cooking. This not only helps keep your stove clean but also reduces the risk of burn-on residues that can be difficult to remove and may cause smoke or odors during cooking.

Causes of a bad drip pan include accumulation of burnt food particles, rusting due to prolonged exposure to moisture, and physical damage such as warping or cracking.

Symptoms of a bad double drip pan include:

Persistent stains and residues that are hard to clean
Rust or corrosion that can transfer to other parts of the stove
Inefficient heating due to uneven surfaces affecting pan stability

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Drip pans had grease that wouldn't come off Sam L. • Dedham , MA • January 03, 2015

Ordered replacement drip pans Read more

$33.78

Compare At:: $40.20
You Save:: $6.42

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Rack

5.0 (38)

By: Ge

Part Number: WB48T10095

The Oven Rack is an OEM part for GE ranges, providing a sturdy and reliable platform for baking and roasting a variety of dishes. Its design allows for easy placement and removal from the oven, offering flexibility in cooking heights and accommodating different sizes of bakeware.

Causes of a bad Oven Rack can range from excessive weight being placed on the rack, exposure to high moisture levels leading to rust, or simply the age-related wear and tear that comes from regular use.

Symptoms of a bad Oven Rack include:

Warping or bending, which can prevent the rack from sitting level in the oven and affect cooking performance.
Rust or corrosion, which can weaken the rack's structure and potentially contaminate food.
Difficulty sliding the rack in and out, which may indicate damage or misalignment.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Stove was missing rack Jack S. • Cloverdale , CA • December 30, 2014

Orded rack by stove model number. fit perfect Read more

$64.35

Compare At:: $76.58
You Save:: $12.23

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Double Drip Pan

4.9 (76)

By: Ge

Part Number: WB34K10010

The Double Drip Pan is an OEM part for GE ranges. This component is located beneath the burners and is designed to catch spills, drips, and other cooking residues, helping to keep the stove clean and preventing potential damage to the internal components of the range. It features a double design to accommodate two burners simultaneously. This drip pan measures approximately 8 inches wide by 17 inches deep.

You should replace the double drip pan if it becomes damaged, corroded, or excessively dirty to the point where it can no longer be cleaned effectively. Causes of a bad drip pan can include exposure to high heat, spills of acidic or corrosive substances, or general wear and tear over time.

Symptoms of a bad double drip pan include:

Visible rust or corrosion
Holes or cracks in the pan
Persistent residue or buildup that cannot be removed

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Drip pans had grease that wouldn't come off Sam L. • Dedham , MA • January 03, 2015

Ordered replacement drip pans Read more

$33.78

Compare At:: $40.20
You Save:: $6.42

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Burner Base

5.0 (32)

By: Ge

Part Number: WB16T10046

The Burner Base is an OEM part for GE ranges and cooktops, designed to securely hold the burner and distribute gas evenly for cooking. This part serves as the foundation for the gas burner, ensuring a stable and consistent flame that can be adjusted for precise cooking temperatures.

Causes of a bad Burner Base can include corrosion, clogging from spilled foods or liquids, and general wear and tear over time. A damaged or deteriorated burner base can affect the flame's quality, leading to uneven cooking or, in some cases, posing a safety hazard.

Symptoms of a bad Burner Base include:

Uneven flame or poor heat distribution
Difficulty igniting the burner
A yellow or orange flame instead of blue
Gas leakage smell when the burner is on

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The cooktop left two switches not activating module (no ticking) intermittent back/ front burner not lighting. Erik E. • Upland , CA • November 30, 2022

Cleaned/ soaked all burners in Ammonia and scraped off the remaining with a pumice stone. Oiled all screws. Replaced (4) ignitors or electrodes and module kit/ right front burner/ burner switch harness. Although this was the third order of switches from 3 different places including the local supplier due to the switches being manufactured upside down and lit on low on the first attempt. (Since I was going to have to open it up again to either repair or remove and return the upside-down harness... Read more

$33.95

Compare At:: $40.40
You Save:: $6.45

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Medium Surface Burner

5.0 (30)

By: Ge

Part Number: WB16K10055

The Medium Surface Burner is an OEM part for GE ranges and cooktops. This burner is essential for a wide range of cooking tasks, from simmering sauces to sautéing vegetables. The medium surface burner ensures even heat distribution and efficient fuel consumption, contributing to the overall cooking performance of your appliance.

Causes of a bad Medium Surface Burner can range from clogged burner ports, which impede gas flow and affect flame consistency, to wear and tear on the igniter or the burner assembly that prevents proper operation.

Symptoms of a malfunctioning Medium Surface Burner include:

Inconsistent flame size or failure to ignite
Uneven heating or hot spots on the cookware
Visible damage or corrosion on the burner itself

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Needed to replace ordered parts Craig J. • Liverpool , NY • July 24, 2015

Took off old, replaced with new. Cross reference worked well, all GE parts. Saved a lot of money compared to local supplier. Read more

$45.95

Compare At:: $55.14
You Save:: $9.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Door Handle

4.9 (15)

By: Ge

Part Number: WB15K5076

The Oven Door Handle is an OEM part for GE ovens. This handle provides a secure grip for opening and closing the oven door, ensuring safe and convenient access to the oven cavity. The handle measures approximately 22 inches by 1 inch.

Causes of a bad oven door handle can include wear and tear from frequent use, accidental impact, or exposure to high heat, which can weaken or damage the handle over time. A faulty handle can compromise the ability to safely operate the oven door.

Symptoms of a bad Oven Door Handle include:

Loose or wobbly handle
Cracks or breaks in the handle
Difficulty in opening or closing the oven door
Handle detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Broken end caps broken handle Jeffrey M. • Pensacola , FL • February 06, 2015

I removed end caps installed one end cap fitted handle to this end cap then fitted 2nd end cap to handle then attached this end cap to stove door. Read more

$48.77

Compare At:: $57.55
You Save:: $8.78

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Small Surface Burner

4.9 (23)

By: Ge

Part Number: WB16K10070

The Small Surface Burner is an OEM part for GE ranges and cooktops. It provides a consistent heat source for cooking, designed for use with smaller cookware, making it ideal for simmering and precise heating tasks.

You should replace the small surface burner if it becomes damaged or worn out. Causes of a bad surface burner can include regular wear and tear, spills, and exposure to high temperatures. A defective burner can lead to uneven heating or failure to ignite properly.

Symptoms of a bad Small Surface Burner include:

The burner not igniting or taking a long time to ignite
Uneven flame distribution
The burner not producing heat at the expected levels

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You 10 year old ge gas range burners didn't have a uniform flame from the burners Willis S. • Benson , AZ • March 08, 2016

I BOUGHT NEW BURNERS FRM YOU. EXCELLENT PRICE, SHIPPING ARRIVAL, PARTS WERE ORIGINAL GE PARTS. TY Read more

$29.40

Compare At:: $34.69
You Save:: $5.29

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Handle Door (Blk)

5.0 (10)

By: Ge

Part Number: WB15X10047

This Door Handle is an OEM part for GE ranges. It is the ergonomic component located externally on oven doors that allows for safe, comfortable opening and closing during cooking cycles. The handle is black in color and measures about 30 and 1/4 inches.

Symptoms of a bad range door handle can include:

Looseness, wobbling, or detachment from the door assembly
Cracked or broken plastic rendering the handle unusable
Peeling, cracking, or discoloration of surface finishes from heat
Difficulty grasping the handle to access oven cavities

Expected causes are repeated heat exposure and grasping stresses over time that degrade mounting points and coating integrity.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Oven door handle broken Sam M. • Seymour , TN • July 18, 2015

Removed 2 outer screws that held on handle and 4 inner screws which held on handle to outer panel. Installed new handle with 4 screws and installed outer 2 screws with spacers which were in door. Read more

$89.51

Compare At:: $107.41
You Save:: $17.90

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Bake Burner W/Ignitor

4.7 (24)

By: Ge

Part Number: WB16K10035

This Bake Burner Assembly is an OEM part for GE ovens and ranges. The bake burner assembly includes both the igniter and the burner tube. It is responsible for producing the flame that heats the air inside the oven cavity during baking and broiling.

Causes of a bad bake burner can include wear and tear from frequent use, clogging or blockage of gas ports, or damage from exposure to high temperatures and spills.

Symptoms of a bad bake burner include:

Uneven baking or cooking results
The oven not heating up properly or taking too long to reach the desired temperature
Visible damage or corrosion on the burner
The oven emitting unusual smells or noises during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Gas oven taking very long time to preheat Michael P. • Bend , OR • July 30, 2016

Found a hole in the burner tube next to the igniter. Replaced both igniter and burner. Very easy repair. Works great now. Read more

$148.95

Compare At:: $175.76
You Save:: $26.81

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Light Lens

4.9 (42)

By: Ge

Part Number: WB36X192

The Oven Light Lens is an OEM part for GE ovens, designed to protect and cover the oven light bulb. It allows for a clear view of the oven's interior, making it easier to monitor the cooking progress without opening the oven door, thus maintaining a consistent temperature.

Over time, the oven light lens can become discolored or cloudy from exposure to high temperatures, grease, and food splatters, which can diminish its effectiveness. Additionally, accidental bumps or cleaning can lead to cracks or breaks in the lens.

Symptoms of a bad Oven Light Lens include:

Diminished light output, making it hard to see inside the oven
Cracks or damage to the lens itself
Discoloration or cloudiness that cannot be cleaned off
The lens becoming loose or falling off

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Oven would not heat and oven light wouldn't work Garett N. • Lubbock , TX • May 06, 2016

Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service... Read more

$10.95

Compare At:: $13.14
You Save:: $2.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Ge Profile Xl44 Parts

Oven Bake Igniter

Appliance Light Bulb

Round Style Oven Or Broiler Igniter

Handle End Cap

Oven Sensor Assembly

Oven Door Handle Endcap

Double Drip Pan

Oven Rack

Double Drip Pan

Burner Base

Medium Surface Burner

Oven Door Handle

Small Surface Burner

Handle Door (Blk)

Bake Burner W/Ignitor

Oven Light Lens