Ghws8350hows Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

The Hub nut is an OEM part for GE washing machines, designed to securely fasten the tub assembly to the drive system of the washer. This component is crucial for the stability and operation of the washing machine's drum, ensuring that it remains properly aligned and attached during the vigorous motion of the wash cycles.

Per the manufacturer due to the high torgue on the hub nut an impact wrench should be used to remove and replace the hub nut. It also rquires a 90 ft lb torque limiting extension WX05X10028 and a 1 5/16th impact socket WX05X10022. You can order these through the links or use ones you already have. WARNING: The 90 ft lb torque limiting extension must be used when removing or installing the hub nut to prevent damage to the hub nut and transmission due to over torquing with the impact wrench. 

Causes of these issues can range from natural wear and tear over time to improper installation or overloading of the washer, which can exert undue stress on the Nut Hub and other related components. Ensuring that the Nut Hub is in good condition and properly tightened is essential for the longevity and proper function of your GE washing machine.

Symptoms of a faulty Hub nut include:

• Unusual noises during the spin cycle, indicating that the drum may be loose or off-balance
• The washing machine's drum exhibiting excessive movement or vibration beyond normal levels
• Water leaks from the area surrounding the drum

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Washer bouncing or grinding? The hub connects the tub to the transmission. Moderate DIY repair requires removing the agitator and aligning spindle teeth.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Fix leaking or puddles under your washer by replacing a cracked or kinked drain hose. Directs wastewater during drain cycles. Easy DIY installation.

Secures washer hoses at pump, tub, and valve connections to prevent leaks and hose blow-offs. Replace worn or missing clamps for a tight seal. Confirm fit.

Washer won't fill or constantly drips? This dual water inlet valve controls hot and cold flow during wash cycles. Fixes H20 supply errors and leaks.

This rotor position sensor (RPS) module monitors the washer's drive motor position and speed and reports it to the control. Replacing a failing sensor helps restore smooth agitation and dependable spin, reducing stalls and early cycle stops.

• Detects the motor rotor's position/speed so the control can start, reverse, and ramp the motor correctly
• Typical symptoms include no spin or agitation, motor starts then stops, or the cycle ends early
• Causes intermittent/erratic motor movement; lid locks but the tub doesn't move
• Use when diagnostics indicate an RPS/speed-sensor or motor feedback fault

• Disconnect power and turn off water before servicing
• Access the motor area; photograph wiring before disconnecting
• Align the sensor correctly and fully seat the harness connector—do not force pins
• Run applicable diagnostics/calibration after installation to ensure proper spin and agitation

Fix a washer that won't spin or stops mid-cycle with a new lid lock assembly. Restores safe operation when the lid isn't detected or won't lock securely.

A small mounting support that provides a stable anchor point for screws used to secure panels or internal assemblies. Replacing a damaged screw platform restores proper fastener engagement and reduces panel movement and vibration. What it does:

• Anchors screws to hold trim, panels or internal components in place
• Restores secure attachment when the original mounting point is cracked or worn
• Helps eliminate rattling, loose panels, or alignment issues caused by a failed mounting surface
• Works with the appliance's existing screws and surrounding hardware to maintain structural fit

• Disconnect power to the appliance before attempting any repair
• Use the correct screws and a properly sized screwdriver to avoid further damage
• Inspect surrounding mounting points and replace any stripped screws or damaged clips as needed

Replacement screw for washers. Secures panels, brackets, and internal components. Needed when original screw is missing, stripped, or damaged.

Fix a washer that won't change cycles or is stuck on one setting with this mode shifter kit. Restores proper cycle selection and operation.

Excessive vibration or banging during spin? This washer suspension rod and spring assembly supports the tub and absorbs movement to restore balance.

8-18 hi/lo 5/8

Plastic retainer that secures the spring/clip assembly on your washer. Replace if cracked, broken, or missing to keep moving parts aligned properly.

This is a hinge damper assembly that attaches to the washer lid or door. It controls the speed at which the lid opens and closes, preventing it from slamming shut and reducing wear on the hinge mechanism. Replace this part if the lid slams down when released, the hinge feels loose or wobbly, or the damper no longer provides resistance.