Need Help?
Call or text
Replacement handle set for refrigerator and freezer doors. Includes both handles. Needed when handles are cracked, broken, or missing from use or impact.
Maybe 6 or 7 years ago I had a fridge conk out on me just before Christmas. It was loaded with food for the holiday, including a prime rib roast that was the hope and dream of the holiday for every red-blooded non-vegan in the house. In order to save the day I bottom-dollared a Frigidaire replacement. It performs well temperature-wise, but when it was only a couple years old the door handle cracked wide open. It was so delicate, you'd think that it was a movie prop "Break-Away Refrigerator... Read more
Replacement handle set for refrigerator doors. Installs on fresh food and freezer compartments. Needed when original handles crack, break, or snap off.
I went online to AppliancePartsPros, easilly found the diagram and model # needed, submitted my order, and received the part if not the very next day, the day after that. Was extremely pleased with how easy it was to find the needed part, and even more pleased with how quickly it arrived. My husband put the handle on with a screwdriver. Thanks for your service. Read more
Fix dishwasher leaks on the floor with this door gasket and strike kit. Easy 15-minute repair—gasket presses into groove, no glue needed. Video included.
I followed your step by step instructional online video. That is one great tool you are providing for your customers! Read more
Fix a dishwasher door that won't close or latch shut with this door latch assembly. Easy 5-10 minute repair with basic tools and installation video.
With your part thanks Read more
The Door Handle is an OEM part compatible with Frigidaire refrigerators. This component serves as the primary means of opening and closing the refrigerator door, offering both functionality and aesthetic appeal. This handle measures approximately 17 x 1". This white handle comes with block 218396700
Symptoms of needing to replace the door handle include:
Causes of a faulty door handle can include physical impact or mishandling during use or cleaning, general wear and tear over extended periods, or issues with the internal mounting hardware or mechanisms.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.
Ordered a new handle. Unscrewed two screws took the old handle off and put the new one on put the screws back in. It works great!! Read more
Broken or missing dishwasher handle end cap? This finishing piece covers handle ends for a complete look. DIY repair in 15-30 minutes with basic tools.
Removed Torx screws inside the dishwasher door, this causes the door panel to fall forward/down. Having a rug or something underneath to prevent scratches is useful. It's about 8 screws that need to come out, if I recall correctly they are all the ones with the torx head facing into the dishwasher when in the closed position. Then the panel comes off, exposing the bolts holding the handles, the cap comes off easily and replaces easily and reverse the process. Some of the screws are different... Read more
Replace your cracked or broken refrigerator door handle. This kit includes handles for both fresh food and freezer doors. Easy DIY installation.
Bought the new handle and changed it. One should note BOTH upper and lower handle comes in the package. Read more
Cracked or broken dishwasher handle? This door handle restores function. Requires removing inner door panel for installation. Video guide available.
In order to replace this, you must remove the "outer door". This service manual is a pretty good reference (page 37): http://members.msaworld.com/wp-content/uploads/sites/3/2017/02/2013-DW-Service-Manual.pdf Note that this specific dishwasher has 12 screws that need to be removed before the outer door can be separated. Once separated, don't even bother trying to push the broken handle out of the front as suggested. You will probably end up damaging the outer door. Instead, take some... Read more
Plastic support bracket that secures the freezer handle to the door. Replace if cracked, broken, or missing to properly mount your handle assembly.
Replaced broken handle support bracket (part #AP5620448) and cap (part #AP5620751). Used a phillips head screwdriver and allen wrench. Pliers also came in very handy. If replacing cap and support bracket, be sure to install cap before support bracket, otherwise you'll have trouble installing the cap. I ended up not needing to replace the fixer handle (part #AP4372038), but I'll keep it around just in case. Read more
Fix a dishwasher that won't start or beeps repeatedly with this door latch assembly. Solves doors that won't stay closed or cycles that won't stop.
I found the door switch was not making contact when the door closed. I adjusted it, but then it would not open so the dishwasher would run when the door wasn't closed. The contacts were too long in the switch so they would bend and stay together when the door opened. The original switch was very poorly made for a very expensive Maytag dishwasher. The new switch you supplied was much better quality and easily replaced the one that was installed at the factory. I was a little baffled at the... Read more
Replacement door handle for front load washers. Installs on the outer door panel. Replace if cracked, broken, or loose from wear or excessive pulling.
I purchased the parts from appliance parts pros and followed their repair video, to complete the repair myself. It took about 10 minutes, with complaining kids in the background. It was simple, and saved me a ton of money. Read more
Plastic support bracket that secures the freezer door handle. Replace if cracked, broken, or handle keeps loosening. Installs on bottom freezer drawer.
Followed your instruction from your youTube instructions Read more
Replacement control knob for gas range burners. Installs on the control panel to adjust flame and heat settings. Order if your knob is broken, cracked, or missing.
Ordered a new knob, and put it on. Read more
Control knob for gas range burners and oven. Replaces worn, cracked, broken, or missing knobs. Installs on control panel to select heat settings.
Ordered new knob and replaced it, easy fix. I felt the part was a little pricey. Read more
Replace cracked, melted, or peeling burner control knobs on your range. This plastic knob installs on the control shaft to adjust heat settings.
Went to the AppliancePart Pros website, found the OEM replacement parts and at a price that was better than any of the other sites I had looked into. Ordered the parts and they arrived within 2 days. Excellent service. Read more
Endcap secures the end of your range oven door handle for a finished look and firm grip. Replace if cracked, broken, or missing. Sold individually.
Removed old handle endcap by unscrewing the two outer screws on the oven door that screw into the endcaps and holds the door together that allows you access the one inner screw that holds the endcap in place. I removed the broken endcsp and replaced with the new one and screwed everything back together. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.