Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Oven light bulb illuminates the cavity for monitoring food without opening the door. Replace when burned out or flickering. Verify fit with your model.
Based on the sound of arcing, one of the elements failed. The upper one tested fine; too bad, as that's the easy one to access. The lower element on my Bosch induction range is accessible from the back, but only after you pry and bend a vertical piece of sheet metal down to a 30-40 degree angle. I assume this saves Bosch a few cents on each unit during production. Before bending that panel down, I remove all vertical obstructions: 240V power cable, the wires to the warming drawer element... Read more
The Sensor is an OEM part for Bosch ovens and ranges. It detects and monitors the actual interior temperature to maintain precise baking and roasting conditions.
Causes of a bad temperature sensor can include wear from prolonged heat exposure within the oven cavity. Physical damage, moisture intrusion or circuitry malfunctions may also lead to sensor failure over time.
Symptoms of a bad oven temperature sensor include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
(1) Unplugged oven. (2) Removed rear panel & unplugged temperature sensor. (3) From inside oven, removed 2 screws holding sensor & pulled sensor out. (4) Installed new sensor by performing steps 1 thru 3 in reverse order. Read more
Fix burners that won't light or spark continuously. This igniter electrode restores reliable gas ignition. DIY-friendly repair in about 15 minutes.
Ordered part at 4:33 on Friday and FedEx dropped it at my door at 9:35 Sat a.m. I did not pay for expedited shipping. I had trouble getting to the offending part as the illustration of the parts was less than desirable. i called the help line and the agent was very helpful with ideas to try as he was looking at the same illustration as I. I did finally figure out the correct way to access the part and once I removed the rusted screws, the repair took only 5 minutes even though I spun my... Read more
Replace your worn oven door gasket to restore a tight seal, prevent heat loss, and maintain consistent baking temperatures. Confirm fit with your model number.
After watching your great video showing how to install, we ordered the product from you. Great service and an easy install!!! Thanks so much!! Read more
Protects the oven light bulb and illuminates the cooking chamber. Replace if cracked, discolored, or broken. Confirm fit with your model number.
Symptoms: would not light & no gas smell/flow. R&R'd gas solenoid which fixed it. Other parts were in addition to primary inop burner. Read more
Replacement rubber feet for gas cooktop grates. Kit includes 4 feet and adhesive. Needed when original feet are cracked, worn, missing, or fell off.
ORDERED NEW ONES FROM YOU Read more
This dishwasher water sensor monitors wash-water conditions so the control can adjust cycle time, rinses, and heating for consistent performance. Replace a failed sensor to restore reliable cleaning results and proper automatic cycle adjustments. What it does
Replaced Read more
This heating element is the direct-replacement heater assembly that provides the heat source for compatible appliances, restoring proper heating so cycles reach the temperatures needed for effective drying or cleaning. What it does:
Diagnosed the system using schematic on back of oven. With power ON (BE VERY CAREFUL - VERY DANGEROUS). Relay board was working - was providing 220VAC to Main Bake Element and Convection Element - even during pre-heat. Temp would not to past 400 - and temp would drop when oven door was opened. With Power OFF - disconnected one of the power leads to the bake element to properly measure its resistance - approx.. 20-25 ohms DC resistance - Element OK. Replace lead to Bake Element. ... Read more
Replace your worn, cracked, or missing range oven control knob. Restores smooth temperature selection and cooking function control with a precise fit.
Needed a hinge kit, appliance repairman told me parts and labor $750. I asked him for the part number, ordered from appliance parts pros for $218 and installed myself in about 45 minutes. Just needed a Phillips and a star head screwdriver. You’ll need the manufacturers part number to find it online, but after that it’s easy. Parts got here in about 4 days. Read more
Range overheating or shutting down unexpectedly? This cooling fan circulates air to maintain stable temperatures and protect internal components.
Replace a broken or missing control knob to restore burner operation. This knob attaches to the valve stem for smooth heat adjustment and control.
This Terminal Box is an OEM part for Bosch Built-In Ovens. Integral to the oven's electrical system, this component serves as a secure connection point for various electrical wires within the appliance.
A common issue with a malfunctioning Terminal Box is loose connections or damage to the terminal block due to heat exposure or aging.
Symptoms of a defective Terminal Box may include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Removed and replace Read more
Restore oven visibility with this complete light assembly. Replace when bulb won't light, lens is cracked, or socket is damaged. Verify fit with your model.
We ordered a new one from Appliance Parts Pros.com and it came within a few days. My husband had no problem with installation of it. Thank you for your promptness with this item. A Sincere Thank You, Bev and Dick Read more
Replacement foot assembly for gas cooktop or range grates. Installs on the underside to cushion contact and stabilize the grate. Replace when worn, missing, or broken.
Used JB Weld epoxy to hold in new feet Read more
Leveling foot for electric and gas ranges. Adjustable metal foot installs at base corner. Replace if cracked, broken, or missing to level your range.
Fix wobbly burners or uneven flames with this gas range burner housing. Secures surface burner assembly for stable operation and proper alignment.