Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Illuminates appliance interior. Replace when burned out or dimming. Verify wattage and base type match your model before ordering. Easy DIY fix.
Dropped light panel by removing two screws with socket set. Unplugged two terminals and unclipped the light socket from the base. Then just clipped the new socket onto the base, plugged the connectors onto the terminals and remounted the base. Total job was less than 15 minutes. Read more
Fix a microwave that runs but won't heat with this high voltage diode. Converts AC to DC power for proper heating. Typical DIY repair in under 2 hours.
I am not an appliance repair man. I am a general surgeon. I went online and researched the problem. The consensus was that my magnetron and diode were the most likely culprits. To replace my microwave with a comparable model would have cost at least $800. The diode and magnetron cost around $170. I watched a few videos on YouTube demonstrating how to do the repair safely and I felt like I could do it. I ordered the parts on a Monday evening and had them Wednesday. The only difficult part of... Read more
Microwave won't start or runs only when door is pulled? Replace faulty door interlock switches. This 2-pack covers top and bottom switches. DIY repair.
First, it was going to cost $95 for an appliance guy just to look at it! I figured there would be an upcharge on the parts + labor on top of the $95, so I took a chance & decided my husband & I could fix it cheaper; we were right, but it was a 3 week process (luckily, we have another microwave in the basement we were able to use in the meantime). I googled the microwave model #, then price checked the same item I thought we needed; printed off the diagrams of the various microwave "systems" &... Read more
Microwave won't turn on or has no power? A blown fuse is often the cause. This safety component protects against electrical surges and short circuits.
I have a Jenn-Air microwave that didn't turn on and had no lights. It just stopped working completely. I unplugged the unit and had to remove the rear cover using a *security screw kit* that prevents people from opening the rear panel. Once opened, I removed the fuse and testing it with an OHM reader to determine that the fuse went bad. But I also had to determine why the fuse blew and noticed a sticky oily substance under the Capacitor. I used a rubber glove and needle nose pliers to... Read more
This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.
I put all pieces that I ordered on the dryer and plugged it in. Read more
The Screw is an OEM part for Whirlpool appliances. This specific screw is used in various locations within Whirlpool appliances, securing components and ensuring the stability and proper alignment of parts. It is designed to fit precisely and maintain
I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would Read more
Microwave not heating but still running? The magnetron controls heating function. DIY repair in under 2 hours with basic tools and multimeter testing.
Restores interior lighting in your microwave oven. Replace when bulb burns out to regain visibility while cooking. Verify fit using your model number.
Ordered and recieved new bulb, called help desk to find how to access the bulb. Found I needed a tamper proof torx bit to remove cabinet screws. After buying bit the job was a snap! Thanks to Appliance Pro. comm and their 24 hr. help line Read more
Microwave glass turntable tray. Color: clear. Measures about 13 inches in diameter.
Put a new one in. Read more
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a... Read more
Microwave won't turn on or has no power? A blown fuse is often the cause. This safety fuse protects circuits from shorts. Requires cover removal to replace.
In addition to blown fuse; the fuse holder was melted at one end. Checked the unit to see if any part or wiring that would cause the issue, none was visible. Referred to wiring diagram included inside to identify components, including interlocks. All seemed functional. Bought replacement 20A fuse. Fuse holder no longer available so bought similar unit with 25A rating - little retrofitting. Put unit back together, and it's working so far. Wife is happy. Read more
The Screw is an OEM part for Whirlpool microwaves. It is responsible for securing various parts of the microwave together. This screw ensures a tight and secure fit for parts and helps maintain the structural integrity of the microwave, preventing any
I received the parts from parts pro within 3 days and everything fit perfectly nd all went well Thanks Parts Pro Wayne Mazur Joliet Il Read more
Microwave won't start when you press the button? This door interlock switch confirms the door is closed so cooking can begin. Fixes no-start issues.
Changed all door switches and used rubber eraser to clean connections on touch panel ribbon cable. Read more
Microwave making a loud humming noise or won't heat? A faulty capacitor is often the cause. Requires cabinet removal and safe discharge. Restore function.
Replaced the Magnetron, Capacitor, and the Diode. Able to repair $1400 microwave with parts that cost $218.54. Thank you ApplianceParts Pros. Watched trouble shooting videos on Youtube and found that these parts needed to be replaced. Read more
Ordered the top 2 likely most parts causing the problem based on troubleshooting diagnostics from AppliancePartsPros and other on-line websites (magnetron & diode/rectifier). Received parts a bit earlier than estimated delivery and installed. Most difficult part of the process was removing oven from over-range mounting location. Second difficulty was achieving alignment/repositioning outer skin surrounding the oven after parts installation. Both problems were satisfied by having more available... Read more
Touch-up paint restores chipped, scratched, or worn appliance finishes. Covers small nicks and surface damage on microwave and refrigerator exteriors.