Jv347heww Parts

The GE light switch is an OEM replacement part responsible for controlling the operation of the lights within your range or range hood. This part is typically located in the control panel of the appliance, often integrated with other control switches and knobs. The primary function of the lamp switch is to enable users to turn the lights inside the range or range hood on and off as needed.

The switch can fail due to regular wear and tear, electrical issues, or physical damage. Over time, the internal contacts can wear out, or the switch mechanism can become stuck.

Symptoms of a bad light switch include:

• The oven light not turning on when the door is opened
• The light staying on continuously, even when the door is closed
• Flickering or intermittent operation of the oven light
• No response when pressing the light button

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Switch (Fan) is an OEM part for GE range hoods. It controls the operation of the fan, allowing you to adjust the ventilation speed and ensure proper airflow while cooking. This switch is essential for maintaining a comfortable and odor-free kitchen environment.

 Causes of a bad switch can include electrical failure, wear and tear from regular use, or physical damage due to impact. Ensuring the switch is functional is crucial for maintaining optimal ventilation performance.

Symptoms of a bad range hood switch include:

• The fan not turning on or off
• Difficulty in adjusting fan speeds
• The switch feeling loose or not engaging properly
• Inconsistent or intermittent fan operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Use part WB02X11325 for the nut - no longer included with the switch.

This Range Hood Fan Blade is an OEM part for GE range hoods. It is a vital component that helps circulate the air and remove smoke, odors, and cooking fumes from your kitchen. The fan blade is designed to fit securely onto the range hood motor shaft, rotating rapidly to create airflow within the hood. 

Causes of a faulty fan blade can include wear and tear over time, damage due to accumulated grease or debris, or physical impact. These factors can result in a loose or unbalanced fan blade, reduced airflow, or noisy operation of the range hood.

Symptoms of a bad fan blade may include:

• Decreased airflow or ventilation efficiency
• Excessive noise or vibration during operation
• Visible damage or deformation of the fan blade

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Charcoal Filter is an OEM part for GE microwaves. It is designed to remove odors and impurities from the air that is recirculated during microwave operation. The charcoal filter plays a crucial role in maintaining a clean and odor-free kitchen environment by trapping grease and odors from the cooking process.

You should replace the charcoal filter regularly as part of routine maintenance. Causes of a bad charcoal filter can include saturation from grease and food particles, reduced effectiveness due to prolonged use, or physical damage.

Symptoms of a bad charcoal filter include:

• Persistent odors in the kitchen
• Visible grease buildup on the filter
• Reduced ventilation efficiency

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Grease Filter is an OEM part for GE range hoods. It is designed to trap grease and other particles from the air that circulates through your cooking appliances, preventing buildup within the ventilation system. 

Causes of a bad Grease Filter can include saturation from accumulated grease and debris, which can limit its effectiveness and airflow. Over time, the filter can also become damaged or corroded, reducing its ability to capture and hold grease particles.

Symptoms of a bad Grease Filter include:

• Visible grease buildup on the filter surface.
• Reduced effectiveness in venting smoke or cooking odors.
• Increased smoke and odors lingering in the kitchen during and after cooking.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lens Cover is an OEM part for GE range hoods. This cover shields the bulb from grease, smoke, and other kitchen residues that can accumulate during cooking, thereby extending the bulb's lifespan and maintaining optimal lighting.

Causes of a bad lens cover can include prolonged exposure to heat and cooking byproducts, which can lead to discoloration, warping, or cracking. 

Symptoms of a bad lens cover include:

• Reduced lighting or a dim kitchen workspace
• Visible cracks or warping on the cover
• Discoloration or cloudiness of the lens
• The lens cover not staying securely in place

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Knob is an OEM part for GE range hoods. This part allows you to adjust fan speed and lighting on your range hood, ensuring optimal ventilation and visibility over your cooktop. 

The main causes for the deterioration of a knob can be attributed to frequent use, exposure to kitchen elements like heat and grease, and accidental impacts that may lead to cracking or breaking.

Symptoms of a bad Knob include:

• The knob sticking or failing to turn
• Difficulty in adjusting the range hood settings accurately
• Visible wear or damage that compromises functionality

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This fan clip secures the ventilation fan blade or blower wheel to the motor shaft, preventing looseness and vibration. Replacing a worn or missing clip restores a tight fit so the fan runs smoothly and maintains proper airflow.

• Holds the fan blade/blower wheel firmly on the motor shaft
• Helps reduce wobble, scraping, or rattling noises during fan operation
• Can resolve a loose or non-spinning fan caused by a failed/missing retainer
• Supports proper airflow and cooling performance

• Disconnect power and allow the appliance to cool before servicing
• Access the fan/blower assembly and note the original clip's orientation
• Seat the clip fully in the shaft groove; ensure the wheel is secure and spins freely
• Wear cut-resistant gloves and use caution around sharp metal edges

This hex nut secures components within the range or cooktop assembly, helping keep parts tight and aligned. Replace a missing, stripped, or corroded nut to restore a solid fit and reduce rattling or loosening during use.

• Provides threaded fastening to hold mating parts together securely
• Replaces worn, stripped, or rusted hardware that no longer tightens properly
• Can help resolve loose or wobbly components and rattling noises
• Built to match the original fastener for proper fit in compatible appliances

• Disconnect power and shut off gas before servicing
• Start threads by hand to avoid cross-threading; tighten only until snug with the appropriate wrench
• Note the order of any washers/spacers during removal to ensure correct reassembly

This control knob replaces a worn or missing knob on your range or cooktop. It attaches to the control stem so you can reliably select heat or temperature settings and restore smooth operation with a clean, finished look.

• Mounts on the control stem to turn the burner or oven control
• Restores positive engagement when the original knob is cracked, stripped, loose, or missing
• Helps ensure smooth turning and proper indexing of settings
• Common symptoms: knob slips or falls off, hard to turn, damaged or missing knob

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off the control stem; avoid prying on the panel
• Align the new knob with the stem and press it on fully until seated
• Verify smooth operation and that the indicator aligns with settings

This motor bracket secures the appliance motor to the cabinet, keeping the motor aligned and stable for reliable operation. It's a direct-fit replacement that restores proper motor support and reduces noise from misalignment. What it does:

• Supports and positions the motor so the shaft and pulleys line up correctly
• Prevents excess motor movement that can cause vibration or rubbing noises
• Helps maintain proper belt/pulley tension for effective power transfer
• Restores secure motor mounting after damage or corrosion

• Follow the appliance service manual for removal and reassembly; secure all mounting hardware to the specified torque.
• Disconnect power before starting work to avoid electrical shock.
• Inspect surrounding mounting holes and fasteners; replace any damaged screws or hardware.
• Check belts, pulleys, and motor mounts for related damage.

The Range Hood Cover is an OEM replacement part for GE range hoods. It serves as a protective barrier for internal components, shielding them from grease, smoke, and debris while also contributing to the overall aesthetic of the range hood. This cover is essential for maintaining the efficiency and cleanliness of the appliance.

Over time, range hood covers can become damaged or discolored due to exposure to heat, grease, and cleaning agents. A compromised cover may fail to protect internal parts effectively, potentially reducing the performance of the range hood.

Symptoms of a bad range hood cover include:

• Visible cracks, warping, or discoloration
• Difficulty securing the cover to the range hood
• Increased grease or debris buildup on internal components
• A diminished appearance of the range hood

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This switch box is the outer housing that protects and organizes oven/stove control switches and wiring, helping keep electrical components secure and stable for reliable cooktop operation. What it does:

• Holds and shields control switches and related wiring from spills, heat, and movement
• Provides secure mounting points for switch terminals to prevent loose connections
• Helps prevent shorting, arcing, and exposure of live wiring
• Restores proper alignment of controls when cracked, melted, or broken

• Disconnect power at the breaker before starting any repair to avoid shock or injury
• Inspect and label wiring before removal; reattach wires to the same terminals
• Handle sharp edges and retainers carefully; some models use clips or screws for attachment
• If switches or wiring are damaged, replace those parts as well for a complete, safe repair

This replacement collar is a small support piece that centers and stabilizes a rotating shaft or drum assembly, helping reduce friction and noise for smoother operation. It restores proper alignment where a worn collar causes rubbing or wobble. What it does:

• Centers and supports the rotating shaft or drum to maintain correct alignment
• Reduces metal-on-metal contact that can cause noise, rubbing, or scraping
• Helps prevent excess wear on bearings, seals, and adjacent components
• Restores smoother rotation when a damaged collar allows wobble or vibration

• Disconnect power before servicing to avoid shock or injury
• Access may require removing panels or the drum/shaft assembly
• Install in the same orientation and seating as the original; inspect adjacent bearings, seals, and mounts

This switch panel is the front control surface that houses the oven/range switches and user controls, restoring reliable input and visible indicators so you can select settings and operate the appliance with confidence. What it does:

• Provides the mounted switches and contact points for oven/range functions
• Transfers button presses to the control assembly so selections register correctly
• Restores visible indicators and tactile control when worn or damaged
• Commonly replaced when buttons stick, controls fail to engage, or the panel is cracked

• Disconnect power to the appliance before beginning any work to avoid shock
• Handle carefully to avoid damaging switch contacts, wiring, or cosmetic surfaces
• May require removing the console or back panel to access mounting screws and wiring harnesses

This cover plate is a factory-style trim panel that protects and finishes the appliance's control area and internal components, restoring a clean appearance and helping keep wiring and switches shielded from debris. What it does

• Covers and protects the appliance control area and underlying components
• Restores a finished look to a damaged or missing trim panel
• Helps prevent dust and spills from reaching electrical parts or switches
• Matches OEM fit and mounting points for a secure replacement

• One cover plate (trim panel)

• High-level replacement; typically removed and installed with basic hand tools
• Disconnect power to the appliance before starting to avoid shock or injury
• Inspect mounting clips and fasteners and replace if worn for a secure fit