Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a washer that won't fill, fills slowly, or shows an LF error code with a new water inlet valve. Most DIYers complete this repair in 10-15 minutes.
I removed the top of the washer, disconnected the existing inlet valve assembly, and replaced it with the part I bought from AppliancePartsPros.com. If it hadn't taken me 30 minutes to figure out how to remove the top of the washer (not the entire top, just the cover over the control panel area), this would have been a 5 minute repair. Read more
The Screw is an OEM part for Whirlpool washing machines. This screw is used to securely attach the wash plate or agitator to the bottom of the washer's drum. This screw ensures that the wash plate remains firmly in place during the washer's operation, preventing movement that could lead to inefficient washing or damage to the machine.
Causes of damage to the screw can include corrosion over time, overloading of the washing machine which puts excess stress on the wash plate, or wear and tear from regular use.
Symptoms of a bad Screw include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Replaced it with a new wash plate. Read more
Washer lid won't lock or stay closed? This lid strike assembly holds the lid securely in place. Simple DIY repair—lift top panel to access and replace.
Ordered parts from Appliance Parts Pros and replaced them.Works like new Read more
Fix grinding noise, clicking sounds, or spin failure in your washer. This brake and clutch assembly typically takes 2-3 hours to replace.
We watched the videos posted on AppliancePartsPros.com website several times before starting the work. Once we were confident of the process, we jumped in with the complete disassembly of the washing machine's drum rotating assembly...everything that touched the drum or made it rotate. My son and I disassembled and inspected each part for wear/damage and ordered replacement parts based on condition. The parts came in within 3 days of ordering. My son and I took 3 hours to reassemble and... Read more
Fix washer clicking noise, no agitation, or no spin. This clutch engages transmission for wash basket rotation. Moderate DIY repair, 1-2 hours.
Unplugged power cord, shut off hot and cold water valves, and disconnected hot and cold water lines. I taped the lid closed and laid washer down on its front panel to access motor parts underneath. Removed center screw (allen wrench) and then removed large, round, plastic rotor (had to use some force with fingers behind it to get it off). I could see that the gear teeth inside the rotor had been partially stripped off ruining the rotor (and causing the noise). I then removed the clutch... Read more
Fix a washer that won't agitate or clean clothes properly. This agitator replacement restores wash action. Moderate DIY repair, requires removing bolt.
I had to cut the old agitator out with an oscillating saw in order to access the agitator drive. This is the second Maytag (MVWC 565) I have had to do this to. I first tried removing it by sliding straps under the agitator then then using a jack to pull it loose which did not work either time. One suggestion I have would be to remove debris from tub as you cut in order to prevent it from dropping from the inner tub into the outer tub. Read more
Flexible tube that drains used water from your washer tub to the standpipe. Replace if cracked, leaking at connections, or torn along the length.
After not finding the needed parts to extend the hose at home depot, i turned to online help. I was able to find the right parts quickly on your site and was able to even watch a few videos on how to do the repair. I was beyond amazed that the parts arrived the next day, even though a Saturday and even with standard shipping. I was fortunate enough that my repair did not need any real explanation and the job was done in less than 10 minutes. Felt really good to be able to solve the problem,... Read more
Fix washer shaking, imbalance, or knocking during spin cycle. This vibration absorber pad dampens movement and reduces noise. DIY-friendly repair.
Replaced suspension rods and worn absorber pads Read more
Fix a washer with a blank display, locked lid, or unresponsive controls. This electronic control board manages all wash cycles and functions.
Replaced part Read more
Fix loud grinding or roaring noises during spin cycle by replacing the washer gearcase. Houses transmission gears and bearings that transfer motor power.
I replaced the gear case, agitator plate, and clutch gear. Read more
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
We ordered parts from appliance parts pros and I fixed it. Read more
Connects washer tub to drain pump. Replace if cracked, split, or chewed by rodents. Common wear from chemicals and rubbing against machine components.
Ordered the part got it in 2 days Read more
Fix a washer lid that won't lock with this lid lock bezel. Replaces cracked or broken bezels that prevent the wash cycle from starting. Easy DIY fix.
Replacement screw for securing washer panels, brackets, and internal assemblies. Replaces missing, stripped, or corroded hardware to restore fit.
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Took off cover, installed new parts. Read more
Washer overfilling or not filling properly? A damaged pressure switch hose prevents accurate water level sensing. Easy 15-minute DIY fix with video.
I read the FAQ section of Appliance Pros parts web site. I found out I needed to replace the temperature control switch, WPW10248240, to correct my problem. This switch also controls the tub filling water level based on air pressure via the attached vinyl tubing. I ordered the switch and the tubing, WP353255, in case mine was no longer any good, and I also ordered the retaining clips for the control cabinet, (2) of WP8312709, because they can be damaged when accessing the controls. My new... Read more