Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more
Fix F1 error codes and temperature control issues with this oven temperature sensor. Takes about 15 minutes to install—just 2 screws and plug-in wiring.
First of all Appliance Parts Pros is the best!! I would not have had the confidence to make this repair myself without their outstanding videos and Q&A sections on their website. And their prices for parts are very competitive. Like many stories on the website, my oven would heat up beyond the temperature set point. When it reached the target temperature, the lower heating element (I think this is the “bake” element) would shutoff, but the top element (“broil” element I believe) would remain on... Read more
Range grease filter captures cooking grease and particles to keep your ventilation system clean. Replace when clogged or discolored. Confirm fit by model.
After many years of excellent service the burner I use most often on the top of my JenAir range rusted through. After trying to remove the burner, which was firmly rusted into place, I decided to replace the cooktop pan, both burners and igniters. It was an easy repair to swap out the new parts for the old, and the only tool necessary was a #2 phillips screw driver. The only difficulty was that although the cooktop pan appears symmetrical, the screw hole pattern on each side is different. I did... Read more
Display going dim or blank? Oven won't turn off or heat? The control board manages temperature, timers, and functions. Moderate DIY difficulty, 1 hour.
I followed troubleshooting guide and repair videos offered on website, ordered replacement oven control board and reinstalled unit using only a 1/4 inch nut driver. Easy fix for do it yourselfer in 15-20 minutes. Make certain to have model number of appliance when ordering. Parts are somewhat pricey but AppliancePartsPros. were much more reasonable than local parts supply houses or other sources plus they offered 1 year replacement even on electrical stuff. Read more
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts o
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more
The Bake Element is an OEM part for Whirlpool ranges. This part provides the necessary heat for baking by generating and distributing even heat throughout the oven cavity. It is located at the bottom of the oven and is essential for achieving co
I diagnosed the problem, found Appliance Parts Pros and watched their video. It was as easy as the video they made said it would be. Overall an amazing experience. I was quoted $250 to have the repairman come do the same thing. My cost was $40. Read more
Broiler not working or heating slowly? This upper heating element restores intense top heat for broiling and browning. DIY-friendly repair in under an hour.
Ordered a new one. Read more
Replacement broiler pan set for ovens. Includes pan and insert to catch drippings during broiling. Order if your original is missing, warped, or damaged.
I ordered the brioler pan for my new stove from y'all it was a little small but that's the part number in the book that I got with the stoveyall did a great job fast shipping just what I ordered will by from again thanks Read more
The Screw is an OEM part for Whirlpool appliances. This specific screw is used in various locations within Whirlpool appliances, securing components and ensuring the stability and proper alignment of parts. It is designed to fit precisely and maintain
I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would Read more
Illuminates oven interior for monitoring cooking without opening the door. Replace if light fails, socket cracks, or bulbs blow frequently. Verify fit.
I ordered the replacement light module and install it. I was able to install the module without removing the walloven from the cabinet. Thank you for quick delivery of the module. Read more
Note: Kit of 2 black grates.
I found this website and was surprised that I could replace drip pans, grates, and knobs. It was at my door the next day after ordering! It took longer to open the box and unwrap the pieces than it did to put the new pieces on. My stovetop looks brand new and I am very happy! Read more
Fix an oven door that won't stay closed or seal properly with this door strike catch. Aligns with the latch to restore firm closure. Simple hand-press install.
Everything works great, but my Jenn-Air stove is more than 15 years old and really needed a face lift. To replace it will cost about $3000.00 to replace, to replace missing and old parts around $500.00. Thankfully Appliance Parts Pros had all the parts I needed to make my stove look as good as it works. Read more
Replacement burner head for gas ranges and cooktops. Installs on top of the burner base to distribute gas evenly. Replace if cracked, clogged, or corroded.
Went to AppliancePartsPros.com as I have used them in the past for other parts. Parts were easy to identify and find on their website. Very reasonably priced. They shipped out right away and I received them and installed them in time to accommodate out of town guests on the weekend. I have a happy wife. This is a good thing. Read more
Replace your worn oven door gasket to improve heating efficiency and prevent heat loss. Restores proper seal between door and cavity. Confirm fit by model.
I replaced the old control panel with a new one. I also changed out the door seal to help prevent the control panel from going bad a second time. It was the heat from the oven getting to the keypad on the control panel that caused it to go bad. Read more
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
Supports and pivots your oven door for smooth opening and closing. Replace this hinge if worn, broken, or causing door misalignment issues. Installs inside oven.
Oven door had been acting up for years (difficult to close). One of the hinges finally broke, so I ordered a replacement. Installation was about as easy as it gets. One trick: FIRST get a paperclip (or small nail or something similar) and put it through the hole in the existing hinge that you are not replacing to keep the hinge from retracting all the way later when the door is removed. If you don't, the hinge could pinch your finger or hand when the door is removed and it snaps closed. At a... Read more