Tool Parts

The OEM Replacement Part Spanner Wrench is a specialized tool used for washing machine repairs and maintenance. It is specifically designed for the easy removal of tub nuts, which hold the inner tub in place. It's a must-have tool for do-it-yourself repairs on many brands of washing machines.

The Bearing Installation Tool is an OEM part for Whirlpool washing machines. This tool is specifically designed to aid in the installation of bearings in the washing machine tub, ensuring proper alignment and secure placement.

This tool is essential for replacing worn-out or damaged bearings, which can affect the performance of the washing machine. Over time, bearings can wear out due to continuous usage, exposure to moisture, or heavy loads. Using this tool ensures that new bearings are installed correctly, preventing potential issues caused by misalignment or improper installation.

Symptoms of bad bearings include:

• Loud, grinding noises during the spin cycle
• Excessive vibration or movement of the washer
• Leaks from the tub area
• The drum not spinning smoothly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Used to install the bearings in the bearing and tub seal kit, part number: W10435302. When replacing this part, if you see that your motor stator is broken, search by your model number to make sure you get the right stator for your model.

The Belt Installation Tool is an OEM replacement part for GE washers. It provides the necessary leverage and positioning for hassle-free belt replacement. 

Causes of needing this tool include belts that become cracked or loose over repeated use. Proper belt tension is critical for efficient spinning and drying cycles.

Symptoms of needing this tool include: 

• Vibration or off-center loads during wash or spin cycles
• Slow or ineffective drying 
• Belt slippage that produces a squealing noise

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This flexible, narrow brush reaches under and behind the cabinet to sweep dust and lint from condenser coils and vents. Cleaning built-up debris helps restore airflow and support proper cooling performance.

• Sweeps dust, lint, and pet hair from condenser coils and ventilation areas
• Flexible reach helps access coils beneath or behind the appliance
• Aids proper heat dissipation by clearing airflow paths
• Helpful when coils are visibly dirty, cooling seems weak, or the unit runs longer than usual

• Unplug or disconnect power before cleaning
• Remove the toe grille or rear access panel if needed to access coils
• Brush gently along the coil fins; avoid bending fins or damaging tubing
• Vacuum or wipe up loosened debris before replacing any panels and restoring power

This pliers can be used to remove or install inner and outer door boot seal clamps on LG and Samsung washers as well as washers for other brands including Whirlpool.

This filter wrench is a ring-style tool used to loosen or tighten a refrigerator's water filter housing or canister. It provides extra leverage to free a stuck filter cup and helps ensure an even, secure reinstallation.

• Provides leverage to loosen a stuck water filter housing/cup
• Assists with secure, even tightening during reinstallation
• Useful when the housing is difficult to turn by hand
• Helpful in tight spaces where hand access is limited

• Turn off the water supply and dispense water to relieve pressure
• Position the wrench around the filter housing/cup; turn counterclockwise to loosen
• After replacing the filter, tighten the housing until snug—do not overtighten
• Restore water supply and check for leaks

Razor blade scraper.

Inner tub spring removal tool

This Leg Adjusting Wrench is a simple tool used to turn and secure appliance leveling legs so washers and dryers sit flat and operate quietly. It makes adjusting legs faster and helps reduce rocking and vibration. What it does:

• Fits over standard appliance leveling legs to raise or lower each corner
• Helps stabilize machines to prevent rocking and uneven operation
• Reduces vibration and noise caused by unlevel appliances
• Useful when installing, moving, or re-leveling washers and dryers

• Turn legs slowly and adjust one corner at a time until the appliance sits level.
• Unplug the appliance (and shut off gas supply for gas dryers) before performing major moves or checks.
• Use caution to avoid pinching fingers when lowering legs; keep hands clear of pinch points.
• Check for damaged feet or mounting hardware and replace as needed.

Used to remove door handles.

This cleaning tool attaches to vacuum hose to clean hard to reach places like refrigerator/freezer condenser coils and dryer lint screen ducts.

This spring hook tool helps remove and reinstall suspension and drive springs safely and precisely, making spring service or drum suspension work easier and more controlled for technicians and DIYers. What it does:

• Provides a secure hook for grabbing and manipulating washer/dryer springs
• Helps install or remove springs during suspension, tub, or agitator repairs
• Reduces risk of spring slippage compared with improvised tools
• Useful when addressing noisy, off-balance, or uneven-spinning washers caused by spring or suspension issues

• Always disconnect power and water supply before servicing appliances
• Wear eye protection and gloves; springs are under tension and can snap back
• Use the tool only for its intended spring tasks and follow OEM service procedures

This finished burner funnel directs gas and air into the burner for correct flame shape and ignition. It replaces a damaged or corroded funnel to help restore even heating and reliable burner performance. What it does:

• Channels gas and air into the burner for proper mixing and flame distribution
• Helps maintain even flame across the burner for consistent cooking heat
• Can reduce ignition delays or uneven flames caused by a damaged funnel
• Works with the burner assembly; not a standalone gas valve or igniter

• Turn off gas supply and electricity to the appliance before servicing
• Replace only with the correct funnel for your burner; follow OEM diagram for orientation
• Tighten fittings by hand-first, then snug—do not overtighten; inspect for leaks after reassembly

This hex wrench is the small hand tool used to turn hex-head fasteners on commercial laundry equipment. It lets technicians and owners loosen or tighten hex screws for service, adjustments, and simple maintenance. What it does:

• Provides a precise fit for hex-head screws and set screws used on appliance panels and components
• Helps secure or remove parts during routine service and repairs
• Useful for adjustments where a hex key is required
• Reduces risk of stripping fasteners when the correct hex tool is used

• Always disconnect power before servicing electrical appliances
• Use the matching hex size to avoid rounding fasteners; apply steady, even force
• Keep the tool and any removed fasteners together to avoid loss during reassembly
• If a fastener is stuck or corroded, avoid excessive force—use penetrating lubricant

A specialized service wrench designed for Horizon/TL-L style Speed Queen machines to aid technicians during maintenance. Provides a secure grip for installing and removing the specific service fasteners used on these transmissions and hubs. What it does:

• Fits the Horizon/TL-L service fastener to allow controlled tightening or loosening
• Speeds routine service tasks that require the OEM service wrench
• Reduces risk of damaging the fastener when compared with improvised tools
• Useful for maintenance and repair work performed on transmission/hub assemblies

• One Horizon/TL-L service wrench

• Intended for qualified service technicians familiar with Speed Queen equipment
• Disconnect power and follow all safety procedures before servicing
• Use the tool only for its intended fastener; do not use as a pry bar or hammer
• Inspect the tool before use; replace if damaged