Need Help?
Call or text
Fix washer won't agitate or makes grinding noise. This pulsator assembly restores proper wash action. Moderately challenging DIY repair with video guide.
We took the washer apart. and used the online videos (very helpful)! Used the diagram to figure out what to order. Parts came quickly and were packaged well. We put the new pulsator assembly and housing assembly in. Put all the rest of the parts back together and everything is working great! We really were grateful for the help ; ) Read more
Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.
Conducted research on web, and via direct contact with AppliancePros where a diagnosis of replacing the water inlet valve and cleaning the sensor tube would "most probably" (80%) handle the issue. The remaining uncertainty would reside in the electronic board circuitry. The price of replacing the water inlet valve was half of a local repair call just to diagnose the issue so I decided to have faith in the odds presented to me. The part arrived on time, and using AppliancePros advice and... Read more
Fix a washer that won't fill with water or leaks into the tub when off. This inlet valve assembly controls water flow during wash cycles. DIY repair.
Replaced the inlet valve assembly. Read more
The Pulsator Cap is an OEM part for LG washing machines. It is designed to secure the pulsator (or agitator) in place, ensuring proper movement of the wash plate during the wash cycle. This component helps in the effective distribution of water and detergent, promoting thorough cleaning of clothes.
You should replace this pulsator cap if it becomes damaged, lost, or worn out. Causes of a bad pulsator cap can include regular wear and tear, exposure to heavy loads, or damage from improper handling. A compromised cap can lead to inefficient washing and potential damage to the pulsator.
Symptoms of a bad Pulsator Cap include:
This OEM LG part is also compatible with Sears/Kenmore models.
We had a repair man come and tell us the needed repair at the cost of 70.00 I ordered the parts and saved money. Read more
This drain hose directs used water from your washer to the household drain. Replace if cracked, split, leaking, or chewed through by rodents.
My granddaughter removed the old hose and installed the new hose I had ordered. Read more
Connects the washer tub to the drain pump. Replace this hose if cracked, split, leaking, or worn from age. Ensures proper water drainage during cycles.
Checked all hoses for clogs cleaned them out and problem still existed so it was time for a new pump and since I was in there I replaced the drain hoses as well. Pump and hoses were exact oem replacement parts project took 30 minutes and the wife was happy again!!! Read more
Fix a washer that won't drain or shows an OE error code with a new drain pump. This 10-minute DIY repair removes standing water and restores proper drainage.
Replaced the existing pump with the new pump. Took about 10 minutes, saved $200 bucks. Read more
The Clutch Motor is an OEM part for LG washing machines. This motor engages the clutch mechanism, allowing the washer to switch between agitating and spinning cycles effectively.
Causes of a bad clutch motor can include wear and tear over time, electrical issues, or mechanical failure due to overloading or improper use.
Symptoms of a bad clutch motor include:
When I looked up LG washer E6 code on the web I saw the tip from LG: unplug the washer and call for service. To me that's a challenge. I saw the AppliancePartsPros.com story on Google, read it and decided to try the solution that worked for other people. A clutch shifter motor that was around $20. I checked a few local appliance parts stores and no one carried the part I needed in stock (even though their websites said available for pickup). I then ordered the part through AppliancePartsPros on... Read more
Fix squealing or grinding noises during spin cycles with this washer motor rotor assembly. Works with the stator to rotate the drum. Video guide available.
Ordered new clutch, rotor and drum sensor assembly. If your clutch bearings go, make sure you check rotor, stator and sensor for damage. Read more
Fix a washer lid that won't stay open or close properly with this door hinge. Restores smooth operation and proper door alignment. DIY-friendly repair.
Removed the broke hinge, installed the new. Read more
Hardware washer that sits beneath screws or nuts to distribute load and secure fasteners. Replace if bent, missing, or worn to restore proper fit.
This inlet hose routes incoming water from the washer's fill valve into the machine to support proper filling. Replace a cracked or leaking hose to stop drips, prevent water damage, and restore reliable fill performance.
I figured after 10.5 years that it might be time to replace the dispenser hoses because I was noticing black stuff in the dispenser trays. I replaced two or the four hoses and clamps on the far left side and for good measure the hot water inlet valve. The inlet valve was okay but the screen had all kinds of crap in there that I couldn't clean out so now I have an extra solenoid just in case one of the others fails. While I was at it I removed the dispenser and cleaned the calcium build up on... Read more
Washer won't start and shows door error code? This door interlock switch assembly fixes DE or DL errors when the lid won't lock. 10-15 minute repair.
Removed two screws on top of the washer, by pulling plastic covers off it exposed two Philips head long screws. Lift the top up and on the right-hand side, I removed two short Philips head screws from door lock switch. Popped old one out and had a new one in about 10-15 min. Washer starts and runs cycle no issues at all. No more DL code. Read more
The Top Load Washer Coupling Assembly is an OEM component specifically designed for LG brand top-loading washing machines. This assembly connects the agitator shaft to the transmission inside the washer, allowing oscillating motions to be transferred through the transmission from the motor.
Symptoms include:
Causes of a bad coupling assembly can include material failure from ongoing vibration exposure, loosened connection points allowing unwanted play, or cracks/breaks due to heavy impacts.
Washer won't spin or agitate properly? A worn stator disrupts the motor's magnetic field, preventing drum rotation. Moderate DIY repair restores spin.
Fix detergent leaks or dispenser jams with this washer detergent housing assembly. Routes detergent properly and replaces cracked or warped housings.