Parts for Lg WKEX200HGA: Section 5 Parts

The Float Assembly is an OEM part for LG washing machines. This part monitors and controls the water level within the appliance. It's a safety feature that prevents water overflow and potential flooding, contributing to the efficient operation of the washing machine by maintaining the correct water level for each cycle.

Causes of a bad Float Assembly can vary from simple blockages that prevent the float from moving freely to electrical faults within the switch mechanism. 

Symptoms of a bad Float Assembly include:

• Water overflowing from the washing machine
• Inadequate water levels that affect the washing cycle's effectiveness
• The washing machine failing to start the fill cycle due to a malfunctioning float switch

This OEM LG part is also compatible with some Kenmore models.

The Vent Hose is an OEM part for LG washing machines. This hose is essential for ensuring proper ventilation within the washer, allowing air to circulate and preventing the buildup of moisture and mildew. It helps maintain the efficiency of the washing machine by facilitating the expulsion of air and excess water vapor during operation.

Causes of a bad washer vent hose can include wear and tear over time, blockages from lint or debris, or damage due to bending or pinching.

Symptoms of a bad vent hose include:

• Excessive moisture or condensation inside the washer
• Musty odors from the washing machine
• Visible cracks or holes in the hose
• Poor ventilation leading to inefficient washing cycles

This OEM LG part is also compatible with Sears/Kenmore.

This sensor assembly monitors operating conditions and sends signals to the appliance control board so the unit can regulate performance. It replaces a damaged or faulty sensor harness to restore reliable sensing and control. What it does

• Detects and transmits condition data (temperature/operational status) to the control board
• Helps the appliance maintain correct operating cycles and performance
• Common symptom: incorrect temperatures, poor performance, or repeated sensor-related error codes
• Common symptom: appliance intermittently stops or behaves erratically when a sensor is failing

• Disconnect power before accessing or replacing the part to avoid shock or damage
• Handle the connector and wiring gently; ensure connectors are fully seated and latched
• Replace only with the exact part number to avoid fit or function issues

Secures washer hoses to pumps, tubs, and drain fittings to prevent leaks. Replace when weakened, rusty, or damaged to maintain tight connections.

This door gasket forms a tight seal between the door and cabinet to keep conditioned air in and moisture out, helping your appliance maintain proper performance and efficiency while preventing condensation or leaks around the door opening. What it does

• Seals the door perimeter to prevent air and moisture exchange
• Helps maintain stable internal temperature and humidity
• Reduces frost/condensation and energy loss from a poor seal
• Common signs of failure: torn or deformed gasket, door not sealing, visible gaps, frost or moisture buildup around the door

• 1 door gasket

• Disconnect power before servicing
• Remove the old gasket from the retainer/channel; clean the mounting surface thoroughly
• Warm the new gasket slightly (room temperature or gentle warm water) to improve flexibility; do not stretch during install
• Seat the gasket fully into the channel, paying special attention to corners; close the door to help the seal set and check for even contact all around

Replacement tub to pump hose for washers. Transports water from the wash tub to the drain pump. Replace if cracked, split, leaking, or damaged from wear.

Secures the door boot seal to prevent leaks during wash cycles. Replace if corroded, loose, or if water leaks from the door area. Confirm fit with model.

Pressure sensor air chamber for washers. Connects the tub to the water level switch. Replace if cracked, clogged with detergent residue, or leaking air.

This inlet hose routes household water into the appliance's fill system, providing a secure, watertight connection. Replacing a worn, cracked, or leaking hose restores proper fill and helps prevent leaks and cycle interruptions.

• Directs incoming water from the supply connection to the appliance's inlet/fill assembly
• Maintains a sealed path to prevent drips and leaks
• Replace if the hose is cracked, swollen, kinked, or fittings are corroded
• Typical symptoms include leaks behind/under the unit, slow or no fill, or a water supply error message

• Disconnect power and shut off the water supply before servicing
• Place a towel or pan to catch residual water and relieve line pressure
• Note routing and fitting orientation; transfer any seals/clips from the original if required
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening, then restore water and check for leaks

Connects detergent dispenser to washer tub. Replace if cracked, leaking, or clogged with detergent buildup. Verify fit with your model number.

Includes sensor probe

Suspension spring supports and stabilizes the washer tub during wash and spin cycles. Replace if broken, snapped, or stretched to restore proper operation.