Parts for Mtd 41CDZ22C799: Shaft / Handle / Shield Parts

This replacement part is cutting line. It is a genuine replacement part made by MTD. This part is used in lawnmowers to ensure clean, even cuts during use. Cutting line might be needed if the user desires a more professional look when cutting grass. This line is used to create lines so the user may follow the pattern while working. Be sure to purchase enough of the cutting line to ensure it fits the entire yard. Be sure to find other resources on how to use the cutting line prior to putting it to use. This cutting line is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools. 

Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.

Symptoms of a bad On/Off Switch include:

• The equipment failing to start
• The machine not stopping when the switch is turned to the off position
• Intermittent power or erratic starting and stopping

This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.

This replacement part is a throttle trigger. This is a genuine replacement part made by MTD. This part is responsible for allowing the user to move the throttle and adjust the settings as needed. A new throttle trigger might be needed if the current one is damaged at all. This can be due to normal wear and tear after years of use. If the throttle trigger is no longer allowing the engine to be controlled, it is recommended that it be replaced as soon as possible. Refer to the proper user manual for more information on how to replace and repair this part. Work gloves are also recommended the prevent injury. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This replacement part is a bolt. This is a genuine replacement part made by MTD. Bolts are small but important to the overall workings of the machine. They work with other parts such as screws and nuts to ensure that certain pieces are held in place and are secure during use. A new bolt might be needed if the current one has become loose, is missing, or has been damaged in any way. If the bolt had been dented, bent, or logged in place, be sure to replace it as soon as possible. This should be a fairly simple repair and only require common household tools such as a screwdriver and pliers. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This MTD link assembly is available individually as an individual component. The click link assembly fastens to the front of the mower and connects it to the mower's body. This setup keeps the deck from dragging the ground during mowing. When the click link assembly malfunctions, the front of the mower will drag the ground and create resistance. A dragging deck can make it nearly impossible to mow, and the deck could become jammed and damage the mower. The deck may begin shaking or rattling severely from excessive movement before the piece breaks completely. Replacing the click link assembly means the fuel tank must be removed. Use care when removing the tank. After completing the fuel tank removal, locate the click link assembly and remove the link pin with a pair of pliers. Next, remove the suspension arm on the frame and deck. Put the new link through the suspension arm and repeat these steps in reverse.This part is a genuine OEM product and is sourced from the original manufacturer. This part is compatible with Remington, Columbia, and MTD brands.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement in lawnmowers, snowblowers, string trimmers, pole pruners, and pole saws. The purpose of a screw in these devices is to affix and fasten components to one another through the process of rotation and piercing through the materials. A screw might have to be replaced in the standard lifespan of an outdoor appliance if it is lost, misplaced, or damaged. Check for punctures, tears, loosening, warping, or corrosion to the metal. This damage can stem from general wear and tear or from direct impact with a falling object or a surface. It can warp the component beyond repair, in which case it must be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, Murray, and Yard Man.

A lower flexible drive shaft is located inside lawn trimmer attachments. It is mounted inside the lower boom housing. The function of the part is to drive the trimmer head. The drive shaft will deteriorate and become more round with use. The rounded ends will ultimately fail to engage the trimmer head. The lower flexible drive shaft may also break or kink. The trimmer head stops quickly when this occurs. The trimmer will no longer function properly, and a replacement part is required.When replacing the lower flexible drive shaft in a trimmer, wear protective gloves. Start by removing the trimmer head, reel, and line assembly. Use a screwdriver to remove the outer head. Remove the guard assembly. Remove the bushing housing assembly. Access the lower flexible drive shaft and remove the damaged part. Lubricate the new part and install it with the lower flexible drive shaft's ring closest to the trimmer head. Reassemble the trimmer.This replacement part is an OEM genuine part supplied by the manufacturer. The lower flexible drive shaft can be used in MTD, Cub Cadet, Troy-Bilt, and Craftsman brand lawn trimmers. The part is sold individually. The lower flexible drive shaft is made of durable materials.

This OEM line trimmer gear box attaches to the housing and includes the gears that spin the trimming line spool when cutting.A new line trimmer gear box may be needed if the part becomes broken or damaged in any way. A sign that the line trimmer gear box may need to be replaced is if the trimmer head will not spin and so makes it impossible to cut anything. Use caution when working with outdoor power equipment, especially with machines that cut like a trimmer does. Remember to wear gloves when operating or performing maintenance on any outdoor power equipment machines.This is a genuine MTD part sourced directly from the manufacturer and sold individually. This line trimmer gear box is used on outdoor power equipment including trimmers, weed whackers, and brush cutters that are manufactured by MTD or Craftsman.

This screw and nuts set is a genuine MTD part, sold individually. This screw and nuts set can be used as a replacement part in a string trimmer. This set provides a variety of screws and nuts which serve as fastening components within the string trimmer.The screw and nuts set in a string trimmer might have to be ordered as a complete replacement part if one or more screws or nuts in the string trimmer has been lost, misplaced, or damaged. If this occurs, the screw and nuts set should be ordered as a genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw and nuts set is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Bolens, and Yard Man.

This is a head assembly for a trimmer. This is not an engine head assembly, however, but the pieces and components necessary to house the cutting line and connect it to the drive shaft. The way a trimmer or weed whacker works is simple. The head assembly spins at a high speed, turning the cutting line that is used to do all of the trimming and maintenance. This entire assembly has to attach to the drive shaft that distributes the power from the motor. This genuine OEM replacement kit contains multiple parts: a head cap, two push nuts, one washer, and the housing head. To make the repair, the original assembly has to be removed using pliers and a flat head screwdriver. It will work with trimmers within the Craftsman and MTD brands, and several others. The largest component, the housing head, is roughly 3" in diameter, and the set uses both metal and plastic parts.

This push nut, also called a retainer, is a genuine MTD part. It is designed as a replacement part for trimmers and weed whackers. There are several push nuts on these machines, and any of them can become worn through regular use or exposure and rusting.A push nut looks like a washer with internal teeth. It works as a fastener, often to secure screws or other parts. There are two parts to the push nut (they attach to one another), although this set is sold individually. If other repairs to the equipment need to be made and push nuts need to be removed, they may become damaged in that process. It is a good idea to have extra push nuts on hand when making other repairs that require the disassembly of the engine or of other parts of the machine. Always disconnect the spark plug, empty the fuel tank, and allow the engine to cool completely before making any replacements or repairs.This push nut or retainer is a genuine OEM part sourced directly from the manufacturer. It is made for compatibility with trimmers made by Craftsman.

This is a head cap that is typically used with a variety of. The head cap is tasked with protecting the line fitting and housing to prevent wear and tear that can be caused if the string trimmer makes contact with the ground. Since the head cap may make contact with the ground or other items, it can become damaged or broken. If these things occur, or the head cap has been lost, it will need to be replaced. If it is not, the line fitting and housing could be damaged and prevent the string trimmer from functioning properly.No tools are required to replace the head cap but work gloves are useful for the process. The original head cap screws on and off so it can be removed easily. After the old component has been taken off, the new head cap can be installed in its place. Before making the repair, the string trimmer should be powered off and the spark plug wire should be disconnected.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as a single component. The head cap is made to be used with string trimmers manufactured by Craftsman and MTD.