Parts for Maytag MFI2269VEB5: 03 - Shelf Parts

The Water Filter is an OEM part for Whirlpool refrigerators. It is designed to filter and purify the water for your refrigerator, ensuring clean and fresh drinking water and ice.

A bad refrigerator water filter can be caused by regular use and the buildup of contaminants over time. It may also become less effective if not replaced according to the manufacturer's recommended schedule.

Symptoms of a bad refrigerator water filter include:

• A decrease in water flow or water pressure.
• An unpleasant taste or odor in the water.
• The presence of particles or sediment in the water.
• Cloudy or discolored ice cubes.

If you notice any of these signs or if it has been more than six months since your last filter replacement, it's time to replace the refrigerator water filter with this genuine OEM part. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This is a replacement glass shelf for use in compatible refrigerators to restore a flat, stable storage surface and keep food organized. It fits into existing shelf tracks and replaces a cracked, chipped, or missing shelf. What it does:

• Provides a durable flat surface for storing food containers and groceries
• Replaces broken, cracked, or missing glass shelving to restore usable shelf space
• Helps contain minor spills and keeps items stable during normal use
• Fits into factory shelf tracks for original storage layout

• Remove all items from the shelf area before replacing
• Slide old shelf out of the tracks, then set the new shelf into the same tracks until it seats securely
• Handle glass carefully and wear gloves to avoid cuts; discard damaged glass safely
• Clean the shelf with mild soap and water before first use

This pan trim replaces a damaged or missing edge piece on a refrigerator storage drawer. It restores a clean look and proper fit so the bin seats correctly and operates as designed.

• Attaches to the rim of a refrigerator drawer/pan to finish the edge
• Helps the bin interface and align correctly with its cover/frame
• Replaces cracked, warped, loose, or missing trim to restore proper fit
• Common symptoms: broken or jagged edge, gaps, rattling, or the bin not seating flush

• Unplug the refrigerator and remove the drawer/pan from the compartment
• Release the old trim by disengaging its locking tabs; lift away carefully
• Clean the mating surfaces; align the new trim and press evenly until tabs snap in
• Avoid prying against glass and do not force tabs to prevent damage

This right-side crisper cover support mounts to the refrigerator's inner wall and holds up the crisper cover and glass. Replacing a broken support restores a level shelf and smooth crisper drawer operation.

• Supports the right side of the crisper cover/frame and glass
• Keeps the shelf level to prevent sagging and gaps
• Maintains alignment so crisper drawers open and close smoothly
• Replace if the original support is cracked, warped, or missing tabs

• Disconnect power and clear the shelf area before service
• Remove crisper drawers and the glass/cover; right-hand is as you face the fresh-food compartment
• Release the old support from the liner (tabs/fastener), position the new support, and fully seat it
• Reinstall the glass and drawers; verify the cover sits level and drawers slide properly

This left-hand crisper support mounts inside the fresh food section to hold the crisper shelf and guide the drawer. Replacing a cracked support restores a stable shelf and smooth, reliable drawer movement.

• Supports the crisper glass/shelf on the left side
• Provides the slide track/guide for the crisper drawer
• Helps keep the drawer level and aligned
• Common symptoms: shelf wobble, drawer hard to open/close, drawer drops/falls, visible cracks or missing tabs

• Unplug the refrigerator and clear the crisper area
• Remove the crisper drawers and carefully lift out the glass shelf
• Remove the fasteners securing the old support; transfer any reusable hardware
• Install on the left side as you face the compartment and verify a secure fit before reinstalling glass and drawers

This replacement door frame trim restores the finished edge and appearance of your appliance door. It covers and protects the door opening, improving the look and helping keep the inner components protected from damage. What it does

• Replaces cracked, chipped or scratched door trim to restore a clean appearance
• Covers gaps and protects underlying door edge and gasket area from wear
• Helps prevent drafts where the door finish is damaged
• Fits and secures to the door opening for a flush, finished look

• Turn off and unplug the appliance before starting any repair.
• Remove any screws or clips holding the old trim; keep fasteners if reusable or replace if damaged.
• Align the new trim and press or fasten per the appliance's service instructions to avoid pinching the gasket.

This crisper brace supports the crisper cover/shelf in 30-inch refrigerators, restoring rigidity so the glass doesn't sag and the drawers slide smoothly. Replace a cracked or missing brace to protect the cover and maintain proper drawer alignment. What it does

• Provides structural support for the crisper cover/shelf
• Helps prevent bowing, sagging, or cracking under load
• Keeps crisper drawers aligned for smooth opening and closing
• Common symptoms: broken/warped brace, sagging cover, drawers binding or misaligning

• 1 crisper brace

• Disconnect power before servicing; remove food from the crisper area
• Pull out crisper drawers and lift off the glass/cover
• Release or unfasten the old brace; seat the new brace fully in tabs or screw locations
• Reinstall the cover and drawers; handle glass carefully to avoid breakage

The Deli Drawer Track supports and guides the pantry/meat drawer in the refrigerator's fresh food section. Replacing a worn or broken track restores smooth, level drawer movement and helps prevent sticking, sagging, or the drawer coming off its rails.

• Provides a smooth sliding surface and alignment for the deli/pantry drawer
• Supports the drawer weight under the shelf to prevent drooping
• Replaces cracked, warped, or missing rail to correct binding or uneven travel
• Common symptoms: drawer hard to open/close, drops on one side, misaligned, or falls out

• Disconnect power. Remove the deli drawer and shelf/cover as needed to access the track.
• Retain and reuse existing screws; transfer any stops or trim from the old track if your model uses them.
• Position the new track, secure with screws, and verify smooth operation before reloading the drawer.
• Many models use separate left and right tracks—match the side shown on your model's parts diagram.

This slide is the replacement guide that lets an oven or warming drawer open and close smoothly, restoring proper support and alignment for the drawer. Durable, low-profile fit that helps reduce sticking and uneven movement. What it does:

• Guides and supports the oven/warmer drawer during use for smooth sliding action
• Helps prevent the drawer from binding, catching, or coming off the track
• Reduces noise and uneven movement caused by worn or damaged guides
• Restores correct alignment so the drawer closes flush and operates reliably

• Disconnect power to the appliance before beginning any repair
• Remove the drawer per the appliance service instructions to access the existing slide
• Compare the new slide to the old part for proper orientation before installing
• Tighten fasteners securely and test drawer operation; do not force components

The Pantry Drawer Rail is an OEM part for Whirlpool refrigerators. This part allows it to slide in and out smoothly for easy access to stored food items.

Causes of a bad pantry drawer rail can include repeated heavy loads, general wear and tear, or accidental damage.

Symptoms of a bad pantry drawer rail include:

• Difficulty sliding the pantry drawer in and out
• Pantry drawer not staying in place
• Uneven or wobbly drawer movement
• Visible damage or bending of the rail

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement screw secures specified refrigerator components—such as covers, brackets, and internal panels—so they stay properly mounted. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and reliable operation.

• Provides the correct fastener for locations identified in your model's parts diagram
• Helps prevent looseness, vibration, and rattling of panels or brackets
• Replace if the head is stripped, threads are worn, or the screw is missing
• Symptoms can include loose parts, gaps, or noises from movement

• Unplug the refrigerator and shut off water if working near the ice maker or dispenser
• Match length and type to the original; follow your model's parts diagram for placement
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing, especially into plastic
• Keep track of screw positions; do not mix different screw lengths or styles

The Endcap Kit is an OEM part for Whirlpool refrigerators. This kit is crucial for supporting the shelves, providing a polished look and helping to secure the shelf edges in place. Designed specifically for Whirlpool models, this part plays a key role in the overall functionality and aesthetic appeal of the refrigerator's interior.

The causes for these issues often stem from normal wear and tear, accidental damage during cleaning or adjustment, or improper installation. Ensuring that the Endcap Kit is intact and properly installed is essential for maintaining the structural integrity of your refrigerator shelves and preventing potential injuries or damage to items stored on them.

Symptoms of a malfunctioning Endcap Kit include:

• Loose or unstable shelves
• Difficulty in adjusting or securing shelves to the desired height
• Broken or missing endcap pieces, leading to sharp, exposed edges

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Endcap Kit is an OEM part for Whirlpool refrigerators. This kit is crucial for supporting the shelves, providing a polished look and helping to secure the shelf edges in place. Designed specifically for Whirlpool models, this part plays a key role in the overall functionality and aesthetic appeal of the refrigerator's interior.

The causes for these issues often stem from normal wear and tear, accidental damage during cleaning or adjustment, or improper installation. Ensuring that the Endcap Kit is intact and properly installed is essential for maintaining the structural integrity of your refrigerator shelves and preventing potential injuries or damage to items stored on them.

Symptoms of a malfunctioning Endcap Kit include:

• Loose or unstable shelves
• Difficulty in adjusting or securing shelves to the desired height
• Broken or missing endcap pieces, leading to sharp, exposed edges

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Pan, Crisper is an OEM part for Whirlpool refrigerators. It is designed to store fruits and vegetables, providing an optimal environment to keep produce fresh for a longer period. The crisper pan helps maintain the right humidity levels, ensuring your produce stays crisp and tasty. Its dimensions approximately measure 6.9" High x 14.05" Wide x 14.9" Long. 

You should replace this crisper pan if it becomes damaged or broken. Causes of a bad crisper pan can include regular wear and tear, exposure to heavy items, or accidental drops. A damaged pan can lead to decreased storage efficiency and potential spoilage of produce.

Symptoms of a bad Pan, Crisper include:

• Cracks or breaks in the pan
• Difficulty in sliding the pan in and out of its compartment
• Reduced ability to maintain humidity levels
• Produce not staying fresh as long as expected

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This crisper brace supports the crisper cover/frame in the fresh food compartment, keeping the drawers aligned and level. Replace a cracked or missing brace to restore proper support and smooth, reliable crisper drawer operation.

• Provides structural support for the crisper cover/frame
• Helps keep crisper drawers level and aligned for smooth sliding
• Replaces a broken, warped, or missing brace
• Common symptoms include a sagging cover, drawers binding or dropping, and visible damage to the brace

• Unplug the refrigerator before servicing
• Remove crisper drawers and the cover/frame to access the brace
• Release or remove any retaining tabs/fasteners, swap the brace, and ensure it seats fully
• Handle glass components carefully and avoid overtightening fasteners

This crisper drawer front replaces the broken face of your refrigerator's produce bin. It restores a secure front wall and easy handhold so the drawer slides smoothly, stays aligned, and keeps items contained. What it does:

• Attaches to the crisper bin to form the front wall and grab point
• Helps the drawer open/close smoothly and remain seated in its tracks
• Replaces a cracked, missing, or warped front that leads to sticking, misalignment, or spills
• Direct replacement for the original front used with this drawer style

• 1 crisper drawer front (pan front)

• Unplug the refrigerator and remove the crisper bin
• Release the old front by disengaging locking tabs or removing screws, as applicable
• Align the new front with the bin and snap/secure it fully; transfer any labels/trim if present
• Reinstall the drawer on the rails and verify smooth travel

The Crisper Drawer Glass is an OEM replacement part for Whirlpool refrigerators.

Causes involve repeated opening/closing of drawers developing stress cracks. Exposure to impacts additionally risks breakage over extended use.

Symptoms of problematic glass include:

• Cracks or chips visible on exterior surface
• Areas of discoloration present
• Warping observed distorting view into drawer

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This replacement screw secures specified refrigerator components—such as covers, brackets, and internal panels—so they stay properly mounted. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and reliable operation.

• Provides the correct fastener for locations identified in your model's parts diagram
• Helps prevent looseness, vibration, and rattling of panels or brackets
• Replace if the head is stripped, threads are worn, or the screw is missing
• Symptoms can include loose parts, gaps, or noises from movement

• Unplug the refrigerator and shut off water if working near the ice maker or dispenser
• Match length and type to the original; follow your model's parts diagram for placement
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing, especially into plastic
• Keep track of screw positions; do not mix different screw lengths or styles

The Humidity Control Slide is an OEM part for Whirlpool refrigerators.This part regulates the humidity levels in the crisper drawers, ensuring optimal conditions for the storage of fruits and vegetables. The slide measures approximately 9 inches wide by 1-1/2 inches deep.

Causes of a bad Humidity Control Slide can include wear and tear over time, physical damage due to mishandling, or buildup of debris that hinders its movement. 

Symptoms of a bad Humidity Control Slide include:

• Inability to adjust humidity settings
• Visible damage or cracks on the slide
• Excessive moisture or dryness in the crisper drawers

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

A straight replacement support rod used to secure or guide moving components in compatible laundry and kitchen appliances. Replaces a worn, bent, or broken rod to restore proper alignment and part movement. What it does:

• Provides structural support or alignment for linked components that rely on a straight mounting or guide pin.
• Restores smooth operation when the original rod is bent, broken, or missing.
• Helps eliminate binding, misalignment, or abnormal movement caused by a damaged rod.
• Works as a direct-fit replacement when the OEM part number matches your appliance.

• One replacement support rod (quantity: 1)

• Inspect surrounding brackets, clips, and fasteners for damage and replace if needed; rod ships alone.
• Turn off and unplug the appliance before attempting any repairs to avoid electrical shock or injury.
• Use basic hand tools; some disassembly may be required to access and remove the old rod.

The Snack Pan is an OEM part for Whirlpool refrigerators. It provides a designated space for storing snacks and small items within your refrigerator.

A bad snack pan can be caused by regular use, accidental damage, or exposure to spills and stains. If you notice cracks, discoloration, or a broken structure in the snack pan, it may indicate a problem with the pan itself.

Symptoms of a bad snack pan include:

• Cracked or damaged pan surface
• Discoloration or staining of the pan
• Inability to open or close the drawer

Replace your faulty snack pan with this genuine OEM part to restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Replacement control knob that restores positive, easy-to-use control of appliance settings. Installs quickly to replace a cracked, stripped or missing knob so you can accurately select cycles, temperatures or timers. What it does:

• Fits onto the appliance control shaft to turn and select settings.
• Replaces knobs that are cracked, loose, hard to turn, or have stripped splines.
• Restores secure grip and precise selection of cycles, temperatures or timers.
• Matches factory fit and appearance when installed.

• Always disconnect power (and gas if applicable) before servicing the appliance.
• Remove the old knob by pulling it straight off the control shaft; align splines and push the new knob fully onto the shaft.
• If the knob does not seat easily, check shaft alignment and spline orientation before applying force.

The Center Crisper Rail is an OEM part for Whirlpool refrigerators. It serves as a support for the crisper drawer, helping to guide and stabilize the drawer as it slides in and out. 

Symptoms of a bad Center Crisper Rail include:

• Difficulty in sliding the crisper drawer in or out.
• The drawer sagging or not aligning properly when closed.
• Unusual noises or resistance when moving the drawer.

Causes of a bad center crisper rail can include physical damage from overloading the drawer, wear and tear from regular use, or breakage due to brittle plastic and aging components.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement divider separates sections inside a bin or drawer so contents stay organized and in place. Replacing a cracked or missing divider restores proper fit and helps prevent items from shifting or jamming during everyday use. What it does

• Divides a bin, basket, or drawer into sections for better organization
• Helps keep small items upright and prevents contents from sliding together
• Seats into molded slots or tabs to maintain the correct layout
• Common symptoms include cracks, broken tabs, warping, or the divider not staying in place

• 1 divider

• Unplug the appliance before servicing
• Remove the bin/basket or drawer to access the divider
• Release the old divider from its slots or tabs; align and press the new divider firmly into place
• Verify the divider is fully seated and the bin/drawer installs and moves correctly before restoring power

This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.

• Fastens covers, trims, brackets, and internal parts to the cabinet/frame
• Used wherever a #8-18 x 5/8 screw is specified
• Replace if the original is missing, corroded, stripped, or will not tighten
• Symptoms: loose or rattling panels, gaps, or hardware that backs out

• Disconnect power; shut off gas/water before servicing
• Match thread and length; start by hand to avoid cross-threading
• Use the correct driver bit and tighten snugly—do not overtighten
• Inspect and replace damaged clips or tabs before securing

The Pantry Lid is an OEM part for Whirlpool refrigerators. It serves as a cover for the pantry drawer, helping to maintain the appropriate humidity levels to preserve the freshness of fruits, vegetables, and other perishables. This lid also aids in keeping the refrigerator organized by compartmentalizing different food items, thus optimizing storage space and accessibility. It measures roughly 28 and 3/16” in length and is white in color.

Symptoms of a bad Pantry Lid include:

• Difficulty in sliding or fitting the lid properly, which may affect the seal and temperature regulation within the drawer.
• Cracks or breaks in the lid, compromising its structural integrity and aesthetic appeal.
• Warping or deformation that prevents it from closing fully or sitting flush with other surfaces in the refrigerator.

Causes of a bad pantry lid can include physical impacts from loading or retrieving items from the refrigerator, material fatigue from regular use, or environmental factors such as temperature fluctuations within the fridge that can stress the plastic.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This trim is a decorative replacement panel that restores the finished appearance of the appliance and helps protect the underlying edge from dirt and wear. Replaces a worn or damaged trim to improve fit and finish. What it does:

• Covers and protects the appliance edge or opening where installed
• Restores the exterior appearance after damage, chips, or scratching
• Helps keep debris and moisture away from the exposed edge
• Useful when gap, misalignment, or visible damage affects the appliance look

• Inspect mounting tabs and fasteners before installing; replace any broken hardware
• Install with the appliance powered off and panels cool; disconnect power if working near electrical components
• Align trim carefully to avoid cracking; secure with original fasteners or manufacturer-recommended hardware
• If the trim requires adhesive or clips, use only OEM-recommended parts and methods

This left-hand hook secures and aligns its mating component in the appliance, restoring proper engagement. Replacing a worn or broken hook helps doors, drawers, or panels latch smoothly and remain in place during use.

• Provides the left-side latching/retention point for the assembly
• Maintains alignment to prevent gaps, racking, or rubbing
• Helps restore smooth opening/closing action
• Typical symptoms: difficulty latching, component feels loose or sags, rattling noises, or a visibly cracked/missing hook

• Disconnect electrical power and shut off gas/water before servicing
• Refer to your model's exploded view/ IPL for exact placement and orientation
• Transfer and reuse existing fasteners; avoid overtightening to prevent damage
• After installation, test fit and operation; recheck alignment and engagement

This right-hand hook mounts to the appliance's front frame to capture the corresponding door hinge arm. Replacing a broken or worn hook restores proper door support, alignment, and a reliable seal for consistent performance. What it does:

• Serves as the right-side receiver for the door hinge arm
• Helps keep the door aligned and closing evenly
• Restores a tight seal to prevent heat or air leakage
• Common failure symptoms include a sagging door, door not closing fully, or difficulty removing/reinstalling the door

• 1 right-hand hook

• Disconnect power and allow the appliance to cool before servicing
• Remove the door per the manufacturer's procedure and support it to avoid injury or damage
• Remove the mounting screws, replace the hook, and reuse original hardware
• Reinstall the door and verify even alignment and a proper seal