Parts for Kitchenaid KBFS20ETBL01: 06 - Shelf Parts

Replace your refrigerator water filter every 6 months to ensure clean, fresh-tasting water and ice. Easy twist-on installation. Verify fit with your model.

Replace cracked or broken pantry drawer glass cover in your refrigerator. Restores shelf surface above full-width deli drawer. Verify fit by model number.

Clear plastic egg container that sits on refrigerator shelves. Replace your cracked, broken, or missing egg holder to keep eggs organized and secure.

This support bracket holds your refrigerator's pantry drawer in the proper position for smooth operation. It prevents the drawer from sagging and ensures proper alignment with door seals. Replace if your pantry drawer won't slide smoothly or appears to hang unevenly.

Supports and guides the deli drawer in your refrigerator's fresh food section. Replace if worn, broken, or causing drawer sticking, sagging, or derailment.

Seals pantry drawer to maintain proper temperature and prevent air leaks. Replace if torn, cracked, or drawer doesn't close tightly. Verify fit with model.

This is a protective cover that fits over refrigerator drawer compartments to provide a clear viewing surface and contain items. It prevents spills from reaching the drawer mechanism while allowing easy access to stored food items. Replace when the cover is cracked, cloudy, or no longer fits securely in place.

Refrigerator glide shelf for easy access to stored items. Replace if cracked, warped, or sliding mechanism fails. Verify fit with your model number.

This slide temperature control is the user-access interface that moves the thermostat connection to select dryer heat levels. It restores responsive, indexed temperature selection for standard slide-style dryer controls. What it does

• Moves the internal contact to select low/medium/high heat settings for the dryer
• Replaces worn or loose slider that causes inconsistent or stuck temperature selection
• Helps correct symptoms such as inability to change heat level, intermittent temperature changes, or a slider that feels loose or won't stay in position
• Works as the mechanical interface between the console knob/lever and the dryer's control assembly

• One slide temperature control (single slider assembly)

• High-level replacement for users comfortable removing control consoles; disconnect power before service
• Handle control panel clips and trim carefully to avoid cracking plastic bezels
• Verify proper seating and alignment of the slider on the control shaft before reassembly

Replacement slide rail for refrigerator pantry or deli drawers. Installs on drawer side to enable smooth gliding. Needed when rail is bent, broken, or cracked.

This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.

• Fastens covers, trims, brackets, and internal parts to the cabinet/frame
• Used wherever a #8-18 x 5/8 screw is specified
• Replace if the original is missing, corroded, stripped, or will not tighten
• Symptoms: loose or rattling panels, gaps, or hardware that backs out

• Disconnect power; shut off gas/water before servicing
• Match thread and length; start by hand to avoid cross-threading
• Use the correct driver bit and tighten snugly—do not overtighten
• Inspect and replace damaged clips or tabs before securing

Left-hand end cap that secures and supports the pantry drawer in bottom-mount refrigerators. Replace if cracked, broken, or missing to restore alignment.

Right-hand end cap for refrigerator pantry drawer. Replaces broken, cracked, or damaged end caps that support the pantry drawer slide mechanism.

Sliding produce bin for the fresh food section. Replace if cracked, broken, or missing to restore smooth drawer operation and keep vegetables organized.

Support brace for 36-inch crisper drawer assembly. Restores secure mounting and alignment. Replace if cracked, broken, or causing drawer instability.

Frame that covers produce drawers and supports shelf glass. Replace if cracked, warped, or broken to restore flat surface and smooth drawer gliding.

This is the glass insert for the crisper cover in your refrigerator. It sits above the crisper drawers to provide a sturdy shelf surface and help seal the drawers, restoring safe, usable storage when the original glass is damaged.

• Fits into the crisper cover frame to create the shelf surface above the drawers
• Helps the drawers maintain proper conditions by acting as the cover/lid
• Replaces cracked, chipped, or missing glass to restore stability
• Common symptoms: broken or shattered glass, unstable or sagging shelf, items tipping through the opening

• Disconnect power and remove food from the area before servicing
• Wear cut-resistant gloves; handle glass carefully
• Remove drawers if needed, lift out old glass from the cover frame, and clean the channels
• Set the new glass evenly into the frame without forcing; reinstall drawers

This ladder side is a replacement side support that secures shelves and internal components, restoring stable shelf alignment and preventing sagging or misalignment in compatible Whirlpool refrigerators and freezers. What it does:

• Provides structural support for interior shelving assemblies
• Keeps shelves aligned to prevent tipping or uneven loads
• Replaces cracked, warped or broken side supports that allow shelves to sag
• Helps restore proper shelf engagement and safe storage of food items

• One ladder side support

• Disconnect power to the appliance before servicing to avoid electrical hazards
• Handle plastic parts carefully to avoid damage during removal/installation
• Basic hand tools (screwdriver, nut driver) may be required; retain screws and hardware from the original part

This replacement screw secures specified refrigerator components—such as covers, brackets, and internal panels—so they stay properly mounted. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and reliable operation.

• Provides the correct fastener for locations identified in your model's parts diagram
• Helps prevent looseness, vibration, and rattling of panels or brackets
• Replace if the head is stripped, threads are worn, or the screw is missing
• Symptoms can include loose parts, gaps, or noises from movement

• Unplug the refrigerator and shut off water if working near the ice maker or dispenser
• Match length and type to the original; follow your model's parts diagram for placement
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing, especially into plastic
• Keep track of screw positions; do not mix different screw lengths or styles

Replacement mounting screw for refrigerators, ranges, and other appliances. Replaces lost, stripped, or damaged screws during repairs or maintenance.

Replacement screw for securing brackets, panels, trim, and internal assemblies. Needed when fasteners are missing, stripped, or rusted to restore stability.

Humidity control slide for refrigerator crisper drawers. Replace this plastic slide if the lever tab has snapped off, cracked, or broken during use.

Replace your refrigerator's temperature control knob. Mounts to the control panel. Order a new knob if yours is cracked, broken, or missing.

Replacement utility pantry drawer pan for bottom-mount refrigerators. Stores deli meats, cheeses, and small items. Replace if cracked, broken, or damaged.

Control knob broken, cracked, or won't turn? This replacement knob restores precise temperature and setting adjustments. Clips into place in minutes.

Clear plastic lid cover for refrigerator pantry drawer. Replaces cracked, broken, or missing pantry lid. Snaps into place over drawer compartment.

Replace a cracked, broken, or missing freezer basket. Installs in the freezer compartment to organize and contain frozen items for easy access.

Replacement divider for refrigerator pantry or deli drawer. Separates foods and prevents shifting. Essential when original is cracked, broken, or missing.