Parts for Kitchenaid KFIV29PCMS00: 06 - Shelf Parts

The Heater is an OEM part for Whirlpool refrigerators. It is an essential temperature control component located inside the refrigerator compartment. The heater works to maintain consistent cool temperatures by heating evaporator coils and circulating airflow inside the fridge. 

Causes of a bad heater include failures in the heating element over time, moisture damage to electrical components, or loose connections to the power supply.  

Symptoms of a bad heater are:

• Fluctuating and unstable interior temperatures  
• Frost or ice buildup inside the refrigerator
• The refrigerator failing to consistently cool food properly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A replacement crisper drawer front panel that restores the appearance and proper closure of the refrigerator crisper compartment. Replaces a cracked, chipped, or damaged front to help the drawer sit and seal correctly. What it does:

• Replaces the damaged or worn front panel on the crisper drawer to restore fit and finish.
• Supports the crisper bin and helps the drawer slide and seat correctly in the cabinet.
• Helps reduce drafts and keeps produce contained when the original front is cracked or warped.
• Restores the refrigerator's interior appearance and eliminates cosmetic damage.

• Always unplug or switch off the refrigerator before beginning any repair.
• Remove food and the crisper drawer before installation; support shelves or components as needed.
• Basic hand tools (screwdriver) may be required; reuse existing screws/clips unless replacement hardware is specified.

This glass shelf assembly replaces a cracked, broken or missing refrigerator shelf to restore stable storage and easy-to-clean shelving. The durable shelf provides a flat surface for storing food and containers and helps contain spills. What it does:

• Provides a stable, level surface for refrigerated items
• Helps contain minor spills and makes cleanup easier
• Replaces cracked, chipped or missing glass shelving
• Restores proper shelf spacing and organization inside the fridge

• Disconnect power to the appliance before servicing to avoid electrical hazards.
• Handle glass carefully; support edges to prevent cracking during removal/installation.
• Remove adjacent bins/drawers or shelving as needed for access, then slide shelf into position on existing supports.
• Use only the matching shelf location and hardware from your unit's diagram; do not force into incompatible slots.

This replacement plastic divider fits into a refrigerator drawer to separate and organize stored food, keeping items from shifting and making contents easier to access. Designed to restore proper drawer organization and functionality. What it does:

• Separates compartments inside a refrigerator drawer to keep foods organized and prevent shifting
• Replaces cracked, broken, or missing dividers that allow items to mix or slide
• Restores intended drawer layout for proper storage and easier access
• Simple, passive part — no electrical function

• High-level, do-it-yourself friendly: typically snaps or slides into the drawer track
• Remove food and drawer before installing to avoid damage or spills
• Inspect mating tracks or clips for damage; replace damaged hardware if divider won't secure

This tempered glass crisper shelf provides a stable, easy-to-clean surface for the refrigerator crisper compartment so fruits and vegetables sit level and stay organized. Restores proper support and visibility in the crisper area. What it does:

• Replaces a cracked, chipped or missing crisper shelf to restore a flat surface for produce
• Supports the crisper drawer and helps keep items from falling into lower compartments
• Provides a smooth, easy-to-wipe surface that resists stains and spills
• Fits into the crisper compartment shelving supports for secure placement

• One (1) tempered glass crisper shelf

• Remove food and drawers from the crisper area before installing
• Handle with care and wear gloves; glass edges can be sharp if damaged
• Set the shelf into the existing shelf supports; do not force or flex the glass
• If the shelf is cracked or broken, discard damaged pieces safely before installing replacement

This rear crisper drawer support secures and aligns the refrigerator crisper, keeping the drawer stable and allowing smooth sliding. Replace a worn or broken rear support to restore proper drawer fit and prevent sagging or misalignment. What it does:

• Holds the rear of the crisper drawer on its track so the drawer stays level during use
• Guides and stabilizes drawer movement to prevent sticking or uneven travel
• Prevents the crisper from tilting, falling, or binding when opening and closing
• Works with the existing front support and drawer components to maintain fit

• One rear crisper drawer support (quantity: 1)

• Remove food and the crisper drawer before replacing the support
• Most repairs are simple and require only basic hand tools; handle plastic parts gently to avoid damage
• Disconnect power to the appliance before servicing if you need to move or access electrical components

This decorative trim piece restores the appliance's finished appearance and covers the edge between panels. It replaces damaged, dented, or scratched trim to keep the unit looking clean and factory-finished. What it does

• Covers and protects the exposed edge of the appliance panel for a finished look
• Replaces bent, cracked, or cosmetically damaged trim
• Helps maintain proper panel alignment and prevents gaps where dirt can collect
• Visible wear or loose fit are common indicators it needs replacement

• One decorative trim piece

• High-level: remove power and follow appliance-specific service manual before starting
• Use appropriate trim/door fasteners and avoid overtightening to prevent cracking
• Support the door during removal to avoid damage

This slide is a direct-fit replacement guide that restores smooth, stable movement for a refrigerator drawer or shelf. It helps the drawer track correctly and prevents binding or uneven operation. What it does:

• Guides and supports a refrigerator drawer or shelf for smooth, controlled opening and closing
• Replaces worn, damaged or missing slide hardware that causes sticking or uneven movement
• Helps maintain correct alignment so the drawer loads and unloads without jamming
• Commonly used when a drawer drops, tilts, or does not track properly

• One replacement slide

• High-level installation: remove the drawer or shelf, unfasten the old slide, and install the new slide using existing mounting holes and hardware
• Inspect mating tracks and mounting points for damage; clean debris before installing
• Use proper tools and avoid overtightening fasteners to prevent cracking the slide or mounting bosses
• Disconnect power only if required by your appliance model; follow all manufacturer safety instructions

This replacement screw fastens trim, panels and small components to restore secure attachment and reduce rattling or movement. Use when a screw is missing, stripped, or damaged to keep parts aligned and operating quietly. What it does:

• Secures panels, brackets and trim to appliance assemblies
• Prevents vibration, rattling and misalignment caused by missing or damaged fasteners
• Replaces lost or stripped screws that can allow gaps or loose parts
• Helps maintain safe, stable operation by keeping components properly fastened

• Disconnect power (and water if applicable) before accessing interior panels
• Use the proper screwdriver or driver bit to avoid stripping the head
• Align parts before tightening and tighten until snug—do not overtighten
• Replace only with the correct OEM part to ensure proper fit and function

This front crisper drawer support secures the refrigerator's front crisper drawer for smooth sliding and correct alignment, reducing sagging and sticking so stored items stay accessible and the drawer operates reliably. What it does:

• Holds the front corner of the crisper drawer in place so the drawer slides and aligns properly.
• Prevents drawer sagging, catching, or uneven movement that can make the drawer hard to open or close.
• Helps maintain proper drawer positioning to protect stored produce and prevent rubbing on the cabinet.
• Works with the existing drawer track and rear support.

• Unplug the appliance or disconnect power before starting any service to reduce electrical risk.
• Empty and remove the crisper drawer before replacing the support; follow the refrigerator's parts diagram for correct orientation.
• Inspect the drawer track and rear support for wear; replace any damaged components to restore smooth operation.

This cover is an access panel that protects internal components and gives the appliance a finished appearance. Replacing a damaged or missing cover helps prevent dirt and moisture from entering and keeps wiring and parts enclosed. What it does

• Shields internal components from debris and accidental contact
• Restores a finished exterior where a panel was cracked, warped, or missing
• Helps maintain proper airflow pathways by covering openings
• Reduces risk of damage to wiring or small parts from bumps or spills

• Disconnect power (unplug or shut off breaker) before beginning any repair
• Use basic hand tools; some models require removing adjacent trim or panels
• Handle carefully to avoid scratching the finish; wear gloves to protect hands

This replacement screw fastens appliance components securely in place. Use it to replace missing, stripped, or corroded hardware so panels, brackets, and covers stay aligned and rattle-free.

• Secures parts such as panels, brackets, covers, or internal assemblies
• Restores alignment and helps eliminate vibration or rattling from loose hardware
• Replaces lost, rusted, or damaged screws during service
• Maintains safe, stable operation by keeping components tight

• Disconnect power before service; if applicable, also shut off water and/or gas
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Use the correct driver bit to prevent stripping the head

This replacement outer access cover protects internal components and closes an access opening on the appliance, restoring a finished appearance and helping keep dust and debris out of service areas. What it does

• Covers and protects internal components behind an access opening or panel
• Helps prevent dust, lint and debris from entering service areas
• Restores a secure, finished appearance after repair or maintenance
• Can reduce drafts or minor rattling caused by a missing or damaged cover

• Disconnect power before beginning any repair to avoid shock or injury
• Remove any fasteners or retaining clips holding the old cover; keep hardware if reusing
• Align cover tabs or screw holes, then fasten securely without over-tightening
• If the cover mates to a seal or gasket, inspect the seal and replace if worn to ensure a proper fit